PRIMER PREP: TWO TONE PAINT JOB ON 1967 JAGUAR 420G
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Doug's initial plan was to paint the bottom half silver and leave the black as is, but once he saw how nice the bottom looked he decided to go all the way. The metal is now polished after using 80 grit now we're going to feather the edge using 220 grit 🔥 www.hiltzautoc...
#BADCHAD #HILTZAUTOCO #AUTOBODYREPAIR
What makes me happy...is watching shows like yours and Jolenes..such a positive attitude and keeps me motivated in my artwork and shop
I enjoy watching and being inspired by Chads motivational speak. You have taught me to accept my project as I want it, work with what I have and ENJOY it. Thank you. Look forward to my morning coffee and video from Jolene and Chad. Keep up the great work.
Its a pity that while the Jaguar was in Chads workshop that the door handles, door trim and sidelights weren't removed. Apart from that it's great to see one of these being renovated.
Gulls circling, fog horns, new lambs, music and especially love makes me happy. I collect memories, the priceless and irreplaceable things that collectively make up out lives. Oh I own a few guitars eh but making art is the best for all of the reasons stated.
Jolene always does a great job filming every step you do
Love the way you take your time sanding the car and when you do the paint it is going to be a prestige looking car
Great job as usual, just another step in the process.
These old jags are amazing engineering for there time, they thought of everything. with twin fuel tanks etc.
I said this before about the dash boards.
The tree farmers would bash the trees to get more marks in the wood.
More marks, more expensive the vineeer.
looking forward to this lesson Chad!! Thank you sir... My VW 1971 Bus will thank you also..
Great show Chad, keep the good work going, from Nottingham , England.
I'm not really into cars but for some reason I just love watching this bloke work. Bloody genius :-)
Chads so full of energy it's amazing. The guy is unstoppable. Top man!
It's great and rare to see a master in his element. Thank you!!!
I don't know the proper way to sand but watching Chad i learned so much on what I did wrong and how to correct my bad habits,! Thank you .
I would take the door handles off to paint always leaves that ridge taping them off.. Plus tighten up the door gap look cleaner..
Can't wait to see Chad's magic! Douge will be so happy!😊
I dig you're program Chad. You're a cool cat right on.
Love hang'in out with you guys ! everyday. Checking for squirrels!!!
This seems to be the only consistent channel i subscribe to bringing innotative content 7 days a week...I kinda look forward to it after a day at the office...more charachters than disney....thank you....
Hey Chad… I’m from Manitoba… A friend of mine says he used to work with you in a chicken slaughterhouse....Said you were a good guy!
You dodged a bullet on that black paint, it feathers out nicely. Nice work brother. 😎
As Chad is sanding the paint there are places that show up with bubbles and imperfections from improper preparation. I agree to stripping off all you can get to. Open the doors to access the areas around the door to windshield pillar, best way to eliminate damage to trim. The good preparation will ensure a good paint spray out. Re-mask the car before paint to remove hidden sanding dust that may be trapped under the chrome trim and masking paper. Chad already knows the routine. I love your dedication to doing it right the first time around. Detail is everything.
Thanks for your input Chad, you & Jolene working as a great team, to bring us some idea of how to do things the right way.
Love watching all the content you and Jolene create. I look forward to seeing what you are upto every day I finish work. Keep it coming
Sanding and words of wisdom from a school of hard knocks. 😎👍🇨🇦
Don't stop Chad. We need you out here.
Keep on pushing Chad and Jolene....(Paul in Barbados)
Ok chad makes since now ty
Chad talks while he hand sands a car, good times
I bought a mini sandblaster for louvers areas and doors at harbor frt. It did perrrrty good 👍
You also teach and we appreciate that, thank you.
Jeff from Jersey here! My day isn't complete until I watch the video of the day. It's that a new air hoseon the wall? Love you guys! I hope you have a new season. Good bless!
That squirrel jokes been in your head since seeing them pine leaves in the fuel cap.
Great show Chad and Jolene , fine sanding is where most projects if they are going to fail it’s where it will happen because people hate doing it because it’s a dirty tedious job and you have to have discipline to do it correctly
I love Chad’s sincerity and dedication. I hope he decides to remove the stainless trim. Removing the trim on some cars can be a tedious delicate job that requires skill, the proper tools, and the knowledge/experience with the type of clip being used so that the trim can be removed without damage.
I think he should find the right person to remove all the trim before painting the car, and have the same fella reinstall it. Might even be cheaper in the long run.
Leaving some of the black paint on the two-tone break seems a little tricky also.
I love watching the videos they make. Jolene is a natural. Just great stuff that has something for everyone
Thanks for all the motivation Chad!
Love your videos thanks for the learning experience keep doing what you enjoy .
Always excellent videos and content, thank you Chad
Chad, just wondering if you grew up watching Mister Rogers... You have that kind heartedness that he tried to teach everybody. One of my heroes to this day.
Cool job! Thanks for the tips. And ya got to love Princes Auto .All good staff working there.
I loved the bike also, it came out nice. On the fly design, see it develop as it changes in progress. Good stuff.
You're doing it exactly the way it needs to be done!!
4th and good afternoon everyone hope all is well on this beautiful day
Great job Chad can.t wait for the end result. Jolene a credit to you also great work.
Looking good buddy...as always very informative..watch everyday...great show
Looking good from Peterborough Ontario ! Man I have sure done a lot of feather sanding over the years!
🙌🏼 🔥👏🏽👏🏽 love to see your work man from 🇵🇷🧐 genius
Paint and chuck the gun ... Great idea ! Never thought of it that way . Good point . gun cleaning has stopped me from moving forward before.
I see this whole car in silver, no double colour.
Good advice as always Chad ☝️👍
Yeah I had to laugh out loud at that one!
Chad you got the touch!
Great tips thanks looking good
I like to use a 3m green 3” bristle disc to take off the chips and any left over paint. It wont take off any metal or warp and it can get pretty close to an edge. I use to use other ways and found this one quite handy try it out works great.
Been there and done that. Keep up the good work....
Ms jolene andDoug have been a good influence on you .
#3 is in the house
Chad, Explain what fisheyes are and what causes them and what prevents them.
Grease or wax usually or oil etc...prevention is a clean surface with a grease and wax remover. Chad uses spray 9 and windex which works well.
A fish eye is a small contaminate (spec of grease, silicone, oil or anything that is a repellent of paint) in the middle of a convex dent in the top coat. Can come from air line or dust from the surrounding atmosphere.
hi from Ireland
What camera model do you prefer? I am thinking on filming my process an like to see what works good for you. Thanks John A.
I think you will still see the blend in you new paint job at the point where you are meeting the silver. I think you should have just stripped the bottom as well because if you were having problems with the black on top you'll be having the same problem under the silver paint.
The silver was already done recently, the black is old. 😉
That’s not all as then you could perfect all the gaps as well. Right now he’s just bodyshoping it to just the ‘get by’ get it out the door job
Why not use a stripper instead of 220 paper around to tape and chrome area?
Chad and Jolene keep up the good work. I would have done it just you are. Paint stripper is a big mess. Machine and hand is the best for Doug's car.
Why wasn't the chromed parts removed for repainting?
Nice video! But to be clear 5000 invested in 1970 in stock market and dividends reinvested would have grown on average close to 200000 as of today. Which is not bad either in my opinion.
If you can leave the black paint around the edges why strip rest of car down to bare metal?
So is can the primer be applied after using 80g on the metal or should a finer grit be used ?
When are we going to see you finish the exterior of the jogotti :-). The. Pull the body. And start to do the frame and suspension.
10th!! phew just made the front row by the skin of my teeth!!
Do you use seam sealer on your builds Chad ?
Sub'd! Im here for the quality resto and that kick ass Pepsi machine.
He’s the bob ross of car building lol
What do you think about por 15
ITS MONDAY.......👍🏻👍🏻🇺🇸
Checking for squirrels lmao!!! Hilarious
Like my Granny always told me, you live and learn from your mistakes.
Squirrels .... lol... made me laff
40, 80, Primer :)
Cool
Yo Chad n Joelene put them spray guns on the merch list it's a collectors item I'm shua sum1 will wana buy it 😏it's practically brand new😎💯👍
I always stack my thoughts up against logic. You said you were leaving that black edge, along the tape line because you wanted the separation . . . I reason the easiest thing to remove and reapply is the pinstriping . . . why didn't you remove it, sand to the edge, and then reapply pinstripe to have a neat, clean separation . . . just logic?
I really just spent 6 hours in my shop sanding my car, just to come on youtube and watch a guy sand a car for a whole hour.... What is wrong with me
back tape that big door gap
Along with the hood and trunk gaps. It amazes me that Canada being the home of 3M and Chad doesn’t use a product like soft edge foam to stop the overspray from getting through the door gaps and panel shuts. He doesn’t appear to have a proper masking paper dispenser.
Hi Chad do you think that you will have Jolenes car done for y'all start filming the new season? Keep showing us what y'all doing on Jolenes car please. God bless y'all.
Aren't you going to take the door handles off?
He said he’s taken them off
He won't take them off. Too much extra work. You know Chad likes short cuts.
WHEN ARE YOU GOING TO FINISH THE BUGATI
That's why he is painting this car for Doug, Doug is rebuilding the engine for the Bugatti. Barter deal 😉
Hi Chad and Jolene that good doing self made Sandpaper black off how long off time
Do you like a100 ?
Chad... What's the name of the primer you use that fills in those 40 and 80 grit runs?
Evercoat feather fill primer
i like the salt of the earth thing you have got going on.
Chad, how is your son doing? Will he be coming back?
Go check out muscle rod shop. To think Chad builds them faster. Taking these guys so long.
Odds are theres no primer on the bottom either.......
For sure!
Dougs decision to paint top only
If l had a little bit of money l would love to buy that 62 off of you
12 commercials! What happened?
Chad I love ya man. But it kills me that I never see you with a sanding block. Especially with black.
I was taught NEVER used fingers EVER. So please share how your able to use your fingers and still get it Tack straight. Cause I'm stumped but you seem to have it mastered!
Thanks man. My 0.02
When sanding filler yes you'll leave finger marks, bare metal no. 😉
Hey Chad wondering what your affiliation with Pepsi is I work for Pepsi for 38 years down in Salinas California I see you have a couple of machines there and a hat just curious.
A stainless steel DMC DeLorean can not have body fill. Also on polished aluminium car's. Look at Randy Grubbs creations and there are many other examples. But I bet this comment will get conveniently ignored. But this channel is all about being honest.
DMC- Delorean Motor Corp
@@trevor5929 I guess I made a mistake on what I wrote your right.
5
Will you be clear coating it . Or one shot paint?
single stage, urethane