Insane Lighting Upgrade for my Cargo/ Race Trailer
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Check out the winch install video here: • Installing a Winch in ...
Check out the solar install video here: • Renogy 100w Starter So...
Follow along as I install a ton of lights in my race trailer. The 2 lights it came with just aren’t enough and trying to load and unload in the dark has been a pain.
Products/Affiliate links: Help me out by purchasing from a link. It helps keep the videos going.
[As an Amazon Associate I earn from qualifying purchases at no cost to you.]
Direct link to my Amazon Store- www.amazon.com...
Lighting Parts
HF Rock Lights- www.harborfrei...
6” Flood Lights-amzn.to/3qym9LP
Led Strip Lights-amzn.to/3qBMl8k
Switch Panel- amzn.to/3NmsQbN
Relay Box- amzn.to/42zPfYr
Video Equipment-
Iphone 14pro
DJI Osmo 6- amzn.to/3W5bsLd
DJI Mic- amzn.to/3UO1XPp
Tripod- amzn.to/3FEynYq
Video Lighting- GVM 800D with stand-amzn.to/45LmLxJ
Moment IPhone Case-amzn.to/43msqZp
Phone Tripod Mount- amzn.to/3N8DSSO
Editing Software-
Davinci Resolve Studio 18.5
Editing Talent-
Almost none. Hope to build that with time :-)
Side note- This DIY is not intended as instructional content. It is merely entertainment for you to do what you wish with. I’m just a guy with an awesome beard working on his trailer. - ยานยนต์และพาหนะ
Drill steel in slow speed. Takes about 10 seconds longer, but bits stay sharper longer. Aluminum, drill as fast as you want/can.
But I'm so impatient..... Good point on the speed. I tend to remind myself to slow down after the fact :-)
Milwaukee makes a cobalt line for hard metal, they are 3 sided for drill chucks as well as shock wave titanium drill bits for your impact driver.. I've had very good luck with each..
Thanks! I’ll have to take a look at those.
You should install the last two lights, recessed into the floor, covered with plexiglass. So you can have lights if you ever work underneath the car
That's a fantastic idea! Thanks!
Spend some money and get a good set of drill bits from a supplier who works with machinists. You'll find some high quality stuff when you do some research. Also, you have to pay attention to your drill bit speeds, how much pressure you are putting on them (especially smaller bits), and use a decent quality cutting fluid for the bits to keep them cooler and to help maintain a sharper edge. Great video as I am just about to upgrade the lighting in my new trailer. You did an awesome job!
Thank you. I hadn’t really thought of looking for a machinist supplier. I’ve always just bought cheap bits, but that always comes back to bite me.
Seems like the rock lights would have been better on the sides than the “flood” lights. Well done! Helpful video
Those darn rock lights are bright. I may add a few more along the bottom edges to supplement. So far they are all working great.
Wow! Such an illuminating experience. I hope my future is this bright.
Lol. That’s funny.
What a difference. Looks good
Loading up this winter will be so much better.
Good video. Thanks for posting.
Thanks for watching!
Wow 😮 looks fantastic!!!
Thanks. I wish I had done this sooner.
All the drill bits suck.Under 1/8th inch.I think we put side pressure on them and that’s what breaks them.Try keeping them sharp.Good luck.I enjoy your Video’s good job.
Thanks for the comment. I think you're right about the side pressure. I get impatient, push harder, break a bit and then wonder why.....
I setup my 20ft cargo trailer almost exactly like you did. Love the lights but I am having issues with my interior light switch melting after using it for longer than a couple minutes.
That’s interesting…. How many lights did you add? You should be able to add up the total amp draw and see if it exceeds the switch capability. Remember the wiring and switch the manufacture of the trailer used was as thin as possible to save money. Also it’s not fused. I would fuse the circuit at 10-15% more than the rated draw of the lights.
I installed all 8 lights. I used same lights and switches that you used in your video. I think i got the issue fixed. I put each switch on its own fuse circuit like you did but I think i had the ground wires mixed up on the switch. after swapping things around so far no more melted switches
@@DrivingForwardBuilds
I'm looking for the Amazon link for the rubber flooring you ordered
Sorry I don’t have a link for that.
Hey man I have a couple questions about the wiring from the switch to the fuse block. Is there a way to get in touch with you to talk it over?
Sure shoot me a message at my email in the profile.
Dewalt cobalt work ok.
😊
What model interior light did you use ?
I'm using these strip lights from Amazon. amzn.to/3t35QrX
Lost me on the solar.
How do you mean? Here’s the solar video for reference. Renogy 100w Starter Solar Kit Install On Box trailer
th-cam.com/video/ZXYnN7S-fws/w-d-xo.html
I needed a way to keep my battery charged when in storage or while I’m in use to top off.
Hyper twist drill bits thank me later
Those look pretty cool!