got a question on a 96 60hp 2 stroke merc. Started cutting out at high speed and thinking it may be fuel air bubble related? Going to pull the flywheel too just to take a look for broken parts up there?
The linkage that goes from the timing adjustment screw up to the part below the flywheel, what is the part called that this linkage hooks to. Also, when disconnecting this linkage should there be a lot a wiggle in this part? Mine seem to be very sloppy.
Is the power head removal similar to a 1996 Mercury 40hp oil injected 4 cylinder dual carb?? My engine failed this weekend and I am planning on rebuilding. Thankfully I have had a few of these Motors and I feel confident tearing it apart.
Hey I have the same motor except it’s a 30. I have a question I have it set up with a tach and the manual says to set the tach to setting 4 I’m using a (Faria gauge). It reads the engine at 1000 rpm at idle which can’t be true because that would grind the gears of three lower. If I had to guess it’s running 500-600 rpm at idle. Any help would be greatly appreciated thanks.
I HAVE A DISASTER ON A 40 HP 02 HONDA CAN'T GET IT TO RUN GOOD AT ALL CLEANED CARBS GOOD SET BY MANUAL ,SPARK IS THERE MISSING SOME TIMES ,CHANGE GHARGING COIL ,FUEL PUMP ,MIDDLE CYL COIL,TIMING IS BANG ON COMPRESSION IS 135 TO 136 ON ALL THREE , SPARKS KIND OF IN AND OUT HERE AN THERE SOUNDS LIKE RUNNING ON TWO SPARK IS WEAK .COULD IT BE CDI ??
That engine looks brand new nice video it would be great to see a step by step video of a complete engine removal and tear down and assembly
Oh my goodness...that firedog logo...just took me back to working at the Firedog counter at Circuit City 15 years ago!
would have loved to see this put back together
Man I loves these kinds of videos. 👍👍👍
For sure need more videos like this. Did that motor get rebuilt?
got a question on a 96 60hp 2 stroke merc. Started cutting out at high speed and thinking it may be fuel air bubble related? Going to pull the flywheel too just to take a look for broken parts up there?
The linkage that goes from the timing adjustment screw up to the part below the flywheel, what is the part called that this linkage hooks to. Also, when disconnecting this linkage should there be a lot a wiggle in this part? Mine seem to be very sloppy.
Is the power head removal similar to a 1996 Mercury 40hp oil injected 4 cylinder dual carb?? My engine failed this weekend and I am planning on rebuilding. Thankfully I have had a few of these Motors and I feel confident tearing it apart.
Which direction does the carrier and valve under read valve plate go.
So the 90’s tracker 40hp 2 strokes were 2 cyl while the mercury was a v4 ??
good video i have a 50hp 2 stroke mercury outboard that is locked up can you give me a estimate of a rebuild price for that motor .
hola muy buen video, no tendrás para facilitarme manual de reparación?
how long have these 59 ci blocks been around ? i just baught 04 60hp heard 40-50-60 same blocks ?
Is there a way I can connect directly for a question about a video?
How much does it cost to rebuild one just ring and piston....if I took it somewhere
I really like to see your videos, I would like them to be available translated into Spanish, greetings from Mexico
How to take off the tail shaft from engine on mercury outboard
Can you give me all the tips and tricks to get more horsepower out of my 40 2 stroke 2001. With 5hrs only on it. Thanks
Hey I have the same motor except it’s a 30. I have a question I have it set up with a tach and the manual says to set the tach to setting 4 I’m using a (Faria gauge). It reads the engine at 1000 rpm at idle which can’t be true because that would grind the gears of three lower. If I had to guess it’s running 500-600 rpm at idle. Any help would be greatly appreciated thanks.
More of these videos. There's got to be plenty of rebuildable cores lying around on late model carbureted two stroke outboards abandoned for parts.
Part 2 Yamaha 40 HB full fitting video upload please
There no DT40 parts on the site, only DF’s
Me gustaría saber la numeración del piston
HOLA COMO PUEDO BUSCAR EXACTAMENTE LAS PIEZAS QUE NESECITO PARA MI MOTOR 40 HP MERCURY YA QUE NO ENTIENDO COMO BUSCARLO
I HAVE A DISASTER ON A 40 HP 02 HONDA CAN'T GET IT TO RUN GOOD AT ALL CLEANED CARBS GOOD SET BY MANUAL ,SPARK IS THERE MISSING SOME TIMES ,CHANGE GHARGING COIL ,FUEL PUMP ,MIDDLE CYL COIL,TIMING IS BANG ON COMPRESSION IS 135 TO 136 ON ALL THREE , SPARKS KIND OF IN AND OUT HERE AN THERE SOUNDS LIKE RUNNING ON TWO SPARK IS WEAK .COULD IT BE CDI ??
Очки удобные 😄🤣👍!!!
👍👍
40 hp