I waited about a month for my size small MEPC setup. It was in ranger green but the cummerbund was made to order. The order was about 14 items so I had to be patient and it was well WORHT IT! I run small SAPI (8.75x11.75) multicurve plates from highcom (4S17M). Fits perfect!
You guys were the ones who sold me on buying a MEPC in the first vid. Turns out at the time I bought the 2.0 and I didn’t realize! Although I’m debating on throwing in a war fighter cumberbund (assuming it can fit)
Hey man, I’m about to put an order in, does this mean it will automatically be a 2.0? I don’t see anything specifically mentioning 2.0 on Defense Mechanisms site, just the MEPC and the pictures look like the original.
I like it. I would have put some loop backing on the inside of the platebags for pontoons like Ice Vents, but that’s really my only change. This is a solid option.
I wish they'd incorporate a quick disconnect system for the shoulder straps - its pivotal for TCCC to get access to the casualty without having to cut away straps or trying to slide it over the casualty's head
Yea I've talked to em about it. The issue is adding it impacts everyone by making shouldering harder while adding features only a small fraction needs. The crye SPC is only one that pulls it off without having a shouldering issue anyway. -Walsh
@@ThinLineDefenseCo M-tac actually makes one that has a nylon strap sewn to the shoulder strap that basically acts as a rip cord for the velcro when under shoulder pads or pack straps. But even a 2" tube on the support side would make it 10x easier to get the plate carrier off in an emergency
I’ve got the strap kit for the recondite and it works great…except when you wear a helmet, then trying to flip the pack over your head because quite a bit more challenging. Still a great bag.
ohhh true... didn't think about that. Worst cast you unstrap one shoulder and one side though instead of both sides.....though but I do see your point! -Walsh
I've been looking at a plate carrier but they are all just so expensive. I *could* buy a krydex or emersongear one or something, but it's just not worth it to cheap out. DefMec's MEPC is just sexy.
Krydex is just amazing for what you get. It's just such a glorious middle finger to the overpriced and overhyped carriers. MEPC is just a fantastic balance of quality, function, and price. And they're cool lol which is all that really matters -Walsh
I know this is an old video, but what are your recommendations for a really light plate carrier for running around a lot in? I play airsoft and tend to run around a lot (yeah I know this isn't for real life combat). I've been looking at the Crye SPC and the DM MEPC. Thoughts?
Both are great! look at the Javlin Concepts or dynamic principles for those tactical games type roles. I lift in my Mepc... I run in the other two Hope that helps!
@@ThinLineDefenseCo Thanks, that helps a lot! Thinking of getting the DM Mech Belt as well, any other suggestions for something light in terms of belts?
First, that haircut really works for you, looking good! Second, I bought a new one just because the updates where enough for me, also it's nice to have another one in case my buddy (same plate size) needs it lol.
haha appreciate it! I've probably had the same haircut for my. whole military career. I just hide it with a hat. And it is a great carrier! Can't go wrong with two. -Walsh
I picked one up and gotta say.. It’s pretty comfortable with the AXL shoulder pads has served me well so far! Only gripe I have with it is it’s fairly tight around the head when slipping it on/off. Is that normal? I understand it’s adjustable. But, when I adjust the straps, so the opening is wider, the bags don’t sit properly. (Just below the sternum with back plate even to front plate.) I hope I explained that correctly and someone is able to help. Thank you!
I like the 2nd placard option on the backpack need some molle on the side to attach different pouches for different setups. Favorite carrier so far the the worrior assault systems lpc v2.#2 Wartech tv-115 is pretty good option to but need to upgrade the shoulder pads right away for any kind of jogging or drills with plates. Where can i get the wizard nation patch
As much as I love my Javlin A-JAC (my personal fave), the price of the MEPC V2 is really what makes me recommend it over the A-JAC to my friends. I personally think that the features of the A-JAC and the MEPC are comparable. The price, MEPC wins. I guess the things that the A-JAC has over the MEPC is the range of adjustment for the shoulder straps and how similar the shoulder straps are to the SPC design (which I favor).
Love my Shaw arc v2. Have Axl equinox bund, ferro side soft armor, unobtanium sleds quad placard, first spear admin, single esstac kywi on left, and warrior assault systems dual horizontal rear dangler with esstac kywi inserts in those too. Still need a hydration bladder and ifak but broke af atm since car went to crap and had to trade her in. Oh and highcom sas7 large Sapis. Still fine tuning fit but absolutely love the setup so far. Keep the videos up. Love em. And please do a review on the arc v2 lol. They have coyote and black still.
oh I got a full multicam Shaw Arc v2....and the IIIa inserts...and all the other ridiculous rear pack and whatever else is in the corner with it. It's a nice setup but that pricetag....goodddddnesss. It's so hard because it's crazy crazy nice but it doesn't really hold plates any better than the other ones for 1/4 the cost. I'm looking to do that full video soon though! -Walsh
Great carrier but you need some adapters and other bits to add in comparability to current gen placards and such. The structural cummerbund is dated but still good if you need to carry a load. There are mission sets that need an SPC but a DM MEPC with a hybrid cummerbund is a better option -Walsh
I would like to know ( if possible , if some of the followers have tried it) if the 3AC ADAPT Cummerbund from Ferro Concepts and its 3AC Side Soft Armor, would work with the MEPC, and how to choose the size. That could be interesting to some, as the soft armor integration is rather interesting. (Maybe an idea for a future video - francken carriers ,what could work with what 😉)
@@flavortown3781 thank you and I understand, but it's rather about having options....starting from a given plate carrier (one that you may already have,instead of buying a new one) - the mix and match possibilities. I commented on this video about this plate carrier but it could have been any other...the LBT is similar in construction to the MEPC, the cummerbund does the difference - hence my question 😉
Is the MEPC as low profile as the slickster ? I have the slickster and it's great for concealability but the quality is subpar. Mainly looking to replace the slickster since I just got my K-zero and absolutely Blown Away by the quality and features but it's more like a micro combat carrier.
Yes, MEPC is very low profile. We have a separate review where we ranked it with our other low vis carriers (slickster, AC1, Otte gear) and it's #1 for me. - Jason
don't understand how the K-0 edged out this carrier in the "minamal PC" department. One of the foudnations of a minimal carrier is to be worn covertly. no way you can do that with a K-0.
hah good point, Jason's done more of the minimalistic. I suppose mine should say more lightweight. Whatever the hell the middle between load bearing and just wearing a strap....that's the fancy name I'm looking for. -Walsh
I swear, every time I think I’ve got a good setup, you go and drop a new PC video. The pack seems really good too. And I find your distinct lack of sandwiches disturbing.
I really like the upgrades to the MEPC but don't know if it's as comfortable at the K19. I'd like to see this with a velocity systems modified gen 4 placard
I think K19 and K-Zero are more comfortable than the MEPC. My current two setups. K Zero with heavy loadout. MEPC 1.0 in a low visibility loadout. I love both - Jason
yea you'd be totally fine, MC plates help with the comfort too. Just make sure you have it fitted and sized right. But I rock my stupid loaded one and have no issues with comfort. -Walsh
As a skinny wizard, I appreciate the fitment range.
I told the wife you helped everyone....you're everyone. Congratulations lol
-Walsh
I waited about a month for my size small MEPC setup. It was in ranger green but the cummerbund was made to order. The order was about 14 items so I had to be patient and it was well WORHT IT! I run small SAPI (8.75x11.75) multicurve plates from highcom (4S17M). Fits perfect!
You guys were the ones who sold me on buying a MEPC in the first vid. Turns out at the time I bought the 2.0 and I didn’t realize! Although I’m debating on throwing in a war fighter cumberbund (assuming it can fit)
Hey man, I’m about to put an order in, does this mean it will automatically be a 2.0? I don’t see anything specifically mentioning 2.0 on Defense Mechanisms site, just the MEPC and the pictures look like the original.
I like it. I would have put some loop backing on the inside of the platebags for pontoons like Ice Vents, but that’s really my only change. This is a solid option.
ohhh like on the shaw? yea I gotta try some of those.
-Walsh
Very solid rundown, I'd be sold if I was in the market for one
I wish they'd incorporate a quick disconnect system for the shoulder straps - its pivotal for TCCC to get access to the casualty without having to cut away straps or trying to slide it over the casualty's head
Yea I've talked to em about it. The issue is adding it impacts everyone by making shouldering harder while adding features only a small fraction needs. The crye SPC is only one that pulls it off without having a shouldering issue anyway.
-Walsh
@@ThinLineDefenseCo M-tac actually makes one that has a nylon strap sewn to the shoulder strap that basically acts as a rip cord for the velcro when under shoulder pads or pack straps.
But even a 2" tube on the support side would make it 10x easier to get the plate carrier off in an emergency
They should have it on one side so no shouldering problems
Long time listener first time caller. Thanks to you guys ive bought all my gear with no regerts :)
ordered one and some add ons (did a mix of Ranger Green and Multicam Tropic) , saved Fiddy bucks with the tldco code TY 😁
The multicam brings out your frosted tips.
haha you mean my grey hair? Thanks Harry....thanks....lol
-Walsh
Very pivotal for us to see how those shoulder straps fit, thanks.
I’ve got the strap kit for the recondite and it works great…except when you wear a helmet, then trying to flip the pack over your head because quite a bit more challenging. Still a great bag.
ohhh true... didn't think about that. Worst cast you unstrap one shoulder and one side though instead of both sides.....though but I do see your point!
-Walsh
Please do a review on one of the carriers from Phalanx Taktik (small german brand)
+the backpanel
I've been looking at a plate carrier but they are all just so expensive. I *could* buy a krydex or emersongear one or something, but it's just not worth it to cheap out. DefMec's MEPC is just sexy.
Krydex is just amazing for what you get. It's just such a glorious middle finger to the overpriced and overhyped carriers. MEPC is just a fantastic balance of quality, function, and price.
And they're cool lol which is all that really matters
-Walsh
Pivotal footage, thank you Mrs. TLDco!
I know this is an old video, but what are your recommendations for a really light plate carrier for running around a lot in? I play airsoft and tend to run around a lot (yeah I know this isn't for real life combat). I've been looking at the Crye SPC and the DM MEPC. Thoughts?
Both are great! look at the Javlin Concepts or dynamic principles for those tactical games type roles.
I lift in my Mepc... I run in the other two
Hope that helps!
@@ThinLineDefenseCo Thanks, that helps a lot! Thinking of getting the DM Mech Belt as well, any other suggestions for something light in terms of belts?
Mech belt or the HRT ARC are the kings of belts currently
Although a salami on rye would be great
What are your guys's thoughts on the Javlin Concepts QD shoulder strap?
love that thing!
Modular Enhanced Peanut butter and jelly sandwich Carrier
MEPB&J.....I like this
First, that haircut really works for you, looking good! Second, I bought a new one just because the updates where enough for me, also it's nice to have another one in case my buddy (same plate size) needs it lol.
haha appreciate it! I've probably had the same haircut for my. whole military career. I just hide it with a hat.
And it is a great carrier! Can't go wrong with two.
-Walsh
I just ordered a MEPC yesterday
Hell yea, hope you saved some money!
-Walsh
Yes Ill take it thank you.
Took you a minute to make this review. I love this plate carrier tho, I been used it since the beginning of the year. Avr 10 hours a day.
agreed... been stupid busy. I've had that carrier to give away for far too long haha
I picked one up and gotta say.. It’s pretty comfortable with the AXL shoulder pads has served me well so far!
Only gripe I have with it is it’s fairly tight around the head when slipping it on/off. Is that normal?
I understand it’s adjustable. But, when I adjust the straps, so the opening is wider, the bags don’t sit properly. (Just below the sternum with back plate even to front plate.)
I hope I explained that correctly and someone is able to help.
Thank you!
hmm I have a fairly large noggin and it's a bit tight around my head but not insanely so. Got a big noodle too?
-Walsh
@@ThinLineDefenseCo Noggin big. Confirmed.
Dammit. Now I have to spend more money.
Only if you dont win
That's the spirit! lol And think of all the random things from my house and yard you get.
-Walsh
Mepc fitted range ❤
I like the 2nd placard option on the backpack need some molle on the side to attach different pouches for different setups. Favorite carrier so far the the worrior assault systems lpc v2.#2 Wartech tv-115 is pretty good option to but need to upgrade the shoulder pads right away for any kind of jogging or drills with plates. Where can i get the wizard nation patch
As much as I love my Javlin A-JAC (my personal fave), the price of the MEPC V2 is really what makes me recommend it over the A-JAC to my friends. I personally think that the features of the A-JAC and the MEPC are comparable. The price, MEPC wins. I guess the things that the A-JAC has over the MEPC is the range of adjustment for the shoulder straps and how similar the shoulder straps are to the SPC design (which I favor).
The A-jac is just Fantastic too though. You really can't go wrong with any of those top choices
-Walsh
WHAT??!!! I NEED A DAMN SANDWICH!!!!
hahah I have...two bananas to offer you
-Walsh
Love my Shaw arc v2. Have Axl equinox bund, ferro side soft armor, unobtanium sleds quad placard, first spear admin, single esstac kywi on left, and warrior assault systems dual horizontal rear dangler with esstac kywi inserts in those too. Still need a hydration bladder and ifak but broke af atm since car went to crap and had to trade her in. Oh and highcom sas7 large Sapis. Still fine tuning fit but absolutely love the setup so far. Keep the videos up. Love em. And please do a review on the arc v2 lol. They have coyote and black still.
oh I got a full multicam Shaw Arc v2....and the IIIa inserts...and all the other ridiculous rear pack and whatever else is in the corner with it. It's a nice setup but that pricetag....goodddddnesss. It's so hard because it's crazy crazy nice but it doesn't really hold plates any better than the other ones for 1/4 the cost.
I'm looking to do that full video soon though!
-Walsh
Thoughts on this vs the Crye SPC?
Great carrier but you need some adapters and other bits to add in comparability to current gen placards and such. The structural cummerbund is dated but still good if you need to carry a load.
There are mission sets that need an SPC but a DM MEPC with a hybrid cummerbund is a better option
-Walsh
Still size up for .8” plates plus a backer from a medium to large for 10x12 plates?
a backer? Aren't those for steel plates?
@@ThinLineDefenseCo this is my first PC setup, but I just assumed it was for more comfort to put in a backer
ohhh hah well you can but not really needed. Lots of newer carriers already have a cushion or comfort built in.
@@ThinLineDefenseCo great! Sounds like I don’t need to size up to a Large for 10x12 plates on the MEPC, even for thicker plates. Thank you!
I would like to know ( if possible , if some of the followers have tried it) if the 3AC ADAPT Cummerbund from Ferro Concepts and its 3AC Side Soft Armor, would work with the MEPC, and how to choose the size. That could be interesting to some, as the soft armor integration is rather interesting. (Maybe an idea for a future video - francken carriers ,what could work with what 😉)
It works but if you wanted full coverage I'd use a different carrier like a 6094g4
@@flavortown3781 thank you and I understand, but it's rather about having options....starting from a given plate carrier (one that you may already have,instead of buying a new one) - the mix and match possibilities. I commented on this video about this plate carrier but it could have been any other...the LBT is similar in construction to the MEPC, the cummerbund does the difference - hence my question 😉
Brother, did you lose weight? Keep it up! Great review. Link to giveaway isn't working. Can you please provide working link? Thank you!
Giveaway is over
- Jason
in that case...brother, did you gain....jk!😂 keep up the great work!@@ThinLineDefenseCo
Wait… Is. This a new MEPC version or a revision to your previous MEPC?
They made some iterative upgrades and refer to the newest version as 2.0.
-Walsh
@@ThinLineDefenseCo 10-4 Thanks buddy!
I'm confused, if I win the giveaway are the sandwiches in the plate bags? ill take BLT extra bacon please.
I should order like sandwich dog toys and include them lol
-Walsh
I'm okay with candy wrappers if I win
and rocks...candy wrappers and rocks. Got it!
-Walsh
Sandwich pouch... sandwich pouch... sandwich pouch!
If you win, I'll fill it with hot dogs lol
-Walsh
@@ThinLineDefenseCo ya know what...that's acceptable
Mepc 2.0 will probably be a new addition to my buddy kits
Yea if only 😢
Fun of living in the uk 🇬🇧
Entry site broken AF ATM fyi
@@ThinLineDefenseCo that's working. The first one wasn't registering the entry actions. ❤️❤️
PizzA
"You dont want 8lb plates" cries in XL plates weighing 9.5lbs
Would love to win this!!
As if DM didn't already have a full cart queued up for me, now my purchase is damn near inevitable once the time is right
Send me some photos once you get it all and I'll share it!
-Walsh
Is the MEPC as low profile as the slickster ? I have the slickster and it's great for concealability but the quality is subpar. Mainly looking to replace the slickster since I just got my K-zero and absolutely Blown Away by the quality and features but it's more like a micro combat carrier.
Yes, MEPC is very low profile. We have a separate review where we ranked it with our other low vis carriers (slickster, AC1, Otte gear) and it's #1 for me.
- Jason
yea it's like a slicker but not horrible lol
What's an admin pouch without a ham and cheese on rhye
Only a POG would consider dumping his water.
My rank says First Sergeant though?
@@ThinLineDefenseCo so
don't understand how the K-0 edged out this carrier in the "minamal PC" department. One of the foudnations of a minimal carrier is to be worn covertly. no way you can do that with a K-0.
hah good point, Jason's done more of the minimalistic. I suppose mine should say more lightweight. Whatever the hell the middle between load bearing and just wearing a strap....that's the fancy name I'm looking for.
-Walsh
@@ThinLineDefenseCo ahh! Makes sense. Thanks for the clarification!
I swear, every time I think I’ve got a good setup, you go and drop a new PC video. The pack seems really good too.
And I find your distinct lack of sandwiches disturbing.
haha so you want the shaw concepts video?? I'll maximize sandwiches for that one.
-Walsh
@@ThinLineDefenseCo That video potentially scares me. Well, it scares my bank account. 😂
Awesome!!!
what kind of side sapis pouches are those? ty in advance!
DM side plate bags!
The giveaway isn't working. Press the links and follow the prompts and it doesn't register the actions. Also sends me in a loop when I login to gleam.
I'll update the link to one that's working better
@@ThinLineDefenseCoGleam is still gleaming but it's okay. If it's not meant to be then it's not meant to be
Are you picking your favorite comments?
listen....I try to reply haha but I can't get to all the sandwhich ones.
-Walsh
Do I need to order the 2.0 specifically on their site or is it just automatically upgraded?
It's automatic. They only offer the 2.0 version now. Hope that helps!
-Walsh
thanks!@@ThinLineDefenseCo
hey i dont see 2.0 on there website is it just upgrades they did to the first one.thanks
yes, sorry I should have been clearer. This is just updates to the current MEPC version.
-Walsh
@@ThinLineDefenseCo thank you man love the channel
Shot out to the wife for being a good sport as a smaller frame dude it helps.
I'll tell her that her help was pivotal!
I love my 1.0, so that means I'll love the 2.0 twice as much, right?
3 times as much...it's math!
@@ThinLineDefenseCo 😆
I really like the upgrades to the MEPC but don't know if it's as comfortable at the K19. I'd like to see this with a velocity systems modified gen 4 placard
I think K19 and K-Zero are more comfortable than the MEPC. My current two setups. K Zero with heavy loadout. MEPC 1.0 in a low visibility loadout. I love both
- Jason
Walsh using bananas to try and get away from sandwiches...
SANDWICH
NUMBER 21.WHAT UP
Do the ferro fcpc v5
Sure - If you want the Ferro, get the Shaw. All done! lol
-Walsh
Awwwww I can’t join the hub away.
giveaway I assume?
Is the mepc comfortable?
super comfy. But it also depends if you go totally nuts. I work out in mine and have it loaded down with like 30+lbs of nonsense
@@ThinLineDefenseCo haha I’d only have some level iv plates that weigh 5.5lbs each side plates and 6 mags
yea you'd be totally fine, MC plates help with the comfort too. Just make sure you have it fitted and sized right. But I rock my stupid loaded one and have no issues with comfort.
-Walsh
@@ThinLineDefenseCo ok cool have you ever tried a raine tactical plate carrier
I have not. But at that price you're well into the k-zero, MEPC, and almost even shaw prices.
Where's the prop pizza 🍕
See above
Algorithm sandwich
I appreciate your delicious algorithm.
No sandwich, this givaway is crap
Not you too !!
I can already tell this giveaway is rigged
haha I'm trying to find a way to put it on the wheel
Thank you for your videos!
Thanks for watching! You guys make this awesome.
-Walsh