Your right jimmy .. had a pug rcz 30 on tick over 250mbar at 2000 rpm wyns got me down till 3mbar and 40mbar ..brilliant stuff …ps you want to see the stuff came out off that one ..
better than the v-tech? either way still great results. i did a similar diagnostic transition recently, from a mk908 to thinktool master 2 which uses the same software as topdon/ launch. very happy with it so far 👍
Another good vid mate. I'm the opposite to you, I prefer my topdon over the autel software, suppose its what you're used to. The wynns fluid is good stuff for the money too, I keep a bottle on my van 👍 How you getting on with the compressor?
@@ORileysAutos it looks a cracking bit of kit. I'm using an 8L clarke bandit compressor at the minute, bought it as.it was cheap and didn't think it would last but it just keeps on going haha
Not that we do that many DPF cleans have used the Wynns fluid a couple of times and like you say does the job and yes Wynns should be sponsoring you. Will be interesting to see how you get on with the TOPDON been thinking about changing myself.
@@ORileysAutos Hi I'm looking to buy something like you using, this TOPDON Plus have some model number? Is ther something you can't do with TOPDON? Wish you all the best.
Hey pal, I have brought a can of wynns dpf & gpf on car cleaner, it says to insert the tube into one of the following: temperature sensor or oxygen sensor, my engine is the same in this video, do you think I can use the same tube you used in this video? Please
Thank you Jimmy for the reply. I tried it today by just pouring it in with a funnel and it did reduce the back pressure and I did a regen and a drive. I will have to get an air compresssor to get a better result. I got loads of foam at the start follwed by smoke once the exhaust heated up.
Yes I advise every customer 👍🏻 Unfortunately only 1/10 usually go ahead with it. When I mention oil change is advised you get the feeling they think you are just adding extras for more money
Top man, excellent videos. 5 stars all day long
Thank you 😊
I'm enjoying the change up in tools used recently. Keep it up
Thanks Yousif
I always like to grab a coffee and watch you get them frothy 👍 top job with good results
Thanks for watching
get em frothy 🤣
Your right jimmy .. had a pug rcz 30 on tick over 250mbar at 2000 rpm wyns got me down till 3mbar and 40mbar ..brilliant stuff …ps you want to see the stuff came out off that one ..
cheers worked a treat!
Glad it helped
better than the v-tech? either way still great results. i did a similar diagnostic transition recently, from a mk908 to thinktool master 2 which uses the same software as topdon/ launch. very happy with it so far 👍
Haven't used Vetec in a while since I moved location. GSF Car parts is not local to me now
Another good vid mate.
I'm the opposite to you, I prefer my topdon over the autel software, suppose its what you're used to.
The wynns fluid is good stuff for the money too, I keep a bottle on my van 👍
How you getting on with the compressor?
Brilliant. Real game changer being so mobile and able to use some handy air tools
@@ORileysAutos it looks a cracking bit of kit. I'm using an 8L clarke bandit compressor at the minute, bought it as.it was cheap and didn't think it would last but it just keeps on going haha
Not that we do that many DPF cleans have used the Wynns fluid a couple of times and like you say does the job and yes Wynns should be sponsoring you. Will be interesting to see how you get on with the TOPDON been thinking about changing myself.
Finding it bit difficult to get used to compared to the Autel. Autel is easier to use I think but I'll get used to it soon I hope
@martinguitarhd28 no reason apart from curiosity. Plus my Autel couldn't reset adblue on a vehicle recently so wanted a backup machine
@@ORileysAutos Hi I'm looking to buy something like you using, this TOPDON Plus have some model number? Is ther something you can't do with TOPDON? Wish you all the best.
Hey pal, I have brought a can of wynns dpf & gpf on car cleaner, it says to insert the tube into one of the following: temperature sensor or oxygen sensor, my engine is the same in this video, do you think I can use the same tube you used in this video? Please
Hi, does this treatment removes the Ash build ups as well? My 320d have Ash level 54g but Soot mass remains just under 5g, Ash level is rising slowly.
Hi there mate Where did you get that machine from and how much it looks really good
Ebay. Topdon Phoenix plus
Tried this on a 1 series today, sadly didnt work, any ideas?
I don't have an air line. If I remove the 02 sensor and poured the wynns fluid in, leaving it for 2 hours, would that work at well?
No. It would sit at the bottom so only clean a small section. This makes it foam
Thank you Jimmy for the reply. I tried it today by just pouring it in with a funnel and it did reduce the back pressure and I did a regen and a drive. I will have to get an air compresssor to get a better result. I got loads of foam at the start follwed by smoke once the exhaust heated up.
Oil change necessary afterwards? Surely
Yes I advise every customer 👍🏻
Unfortunately only 1/10 usually go ahead with it.
When I mention oil change is advised you get the feeling they think you are just adding extras for more money
@@ORileysAutos well when there head gasket goes that’s up to them 🤣
Why would you need an oil change?
Do you ever need to replace the cat or remove it on any cars you come across?
Only 2 in the last 5 years
Hi what would the differential pressure be on a transit mrk 7 2.2 euro 5 engine at low and high idle cheers
Under 10mbar idle. Under 80mbar 3000 rpm
how much do you put liquid on DPF to clean it ?
1 litre
engine cold or warm when i pu it ?
@@badrdin7056 I think it works better when hot 🔥
I've got the same codes at my bmw , can I have your number? I'm based in Northampton, hope you cover my area, thanks
Only cover Bedfordshire
Ok, no problem, can I have a phone number or an adress where to come ? Thanks
@@adyvalcea4942 orileysautos@gmail.com