Thank you so much! I'm just starting out using the Ender 3 V2 and was having a lot of trouble getting good prints. After watching your video however, I am now having the most successful prints ever! Thanks again. I'm so happy to have a 3D printer now and just in time for Valentine's Day. : )
Thanks very much for this very informative video, I recently purchased an Ender3 v2 as my first printer, I’ve got a lot to learn, but this video was a great help.👍👍
Thanks for sharing👍😀 I prefer the Prusaslicer quality and design I like that the filament, and printer setting's are separate for the slicing proces Happy holidays to you all 👍😀
I am new to 3d printing,my Ender 3 V2 is on his way home :) I am planning to print a Heroquest board. I will use 0.2 nozzle and highest detail possible. The items are Tiles about 100x100x5mm and the detail is only at the top. Which is the best orientation for maximum detail? 1) Horizontal :The tile sit on the bed with the nozzle "looking" the detail 2) Vertical: The tile sit on the side with supports and the detail "looking" me.
You got your printer gcode start and stop info. I'm currently having some problems at the end of the print where it's errors out on excluder stepper values. Something with absolute and relative values I think. Not sure why it started doing this all of a sudden.
Everywhere online I see how Cura is the way to go for your ender3v2 but now I every time I try to download the thing it won't show up on my homepage never seems to wanna fully finish downloading and now it's made it so I can't use my slicer that came with the printer I can't seem to purge it from my computer no matter what I do. I've gone through in a raced it everywhere I can find it and yes when I try to reinstall the old slicer it keeps telling me that it can't because Cura is using some of resources. Secura won't work every time I try to use it I have to go through the same set up routines and never actually let me use it. And I can't use the slice of the comes with the reality and there's three V2. So now basically because I tried to download what everyone says to download I can't even use my printer. I watch the videos of people showing you how to install etc. but it's always different than what shows up on my screen. I've tried for your recent both of them I tried to repair the program on the original slicer . nothing works!
Have you made sure it’s still not running in task manger? I had the same problem with discord took me ages to sort the news out I could not re down load it even tho i uninstalled it lol it was some how still I’m running in task manger
So for someone that hasn’t even turned on a computer (except cellphone) in last 20 years. What kinda learning curve we talking? For 3D printing and slicing. Trail and error or should I sign up for classes now ?
Wow well it could be quite a steep curve in your case. If time is important to you then signing up for class is would give alot of value. Otherwise, learning by yourself could be fun, so many things to learn, like an adventure! Just my opinions
I'm curious, I just got ender 3 and it came with creality slicer but my thing is the program seems to lag really bad that i couldnt even begin to learn and understand it, is it the program itself or possibly the laptop?
I now use the Prusa Slicer, and it works OK, but; I think Cura is better. However; I don't think the people at Cura want Creality People using their Slicer. They even say; "Just buy our printer." As if everybody could come up with $2,000.0 to $3,000.0 thousand for a 3D Printer.
I stopped using Cura at version 4.10.0 because they made it to purposely crash the printer nozzle of the CR 10 into the paper clips. That is no mistake, but is something intentional. I don't harbor any hatred or contempt against those people, but; I know when it's time to leave something alone when there is hatred. The makers of Cura don't owe me anything, and I'm thankful for the good times and their generosity. But, some time there is bad blood, for reasons I do not know.
Thank you so much! I'm just starting out using the Ender 3 V2 and was having a lot of trouble getting good prints. After watching your video however, I am now having the most successful prints ever! Thanks again. I'm so happy to have a 3D printer now and just in time for Valentine's Day. : )
Finally someone who made a video that I explain settings and make it understanble. Definetly worth my SUB!
I really like tree style supports. It works well and supposedly wastes less filament.
Would you consider making a Cura VS PrusaSlicer for the ender 3 V2?
Great video on Cura settings especially for a beginner! Need more like this that's easy to understand. Thank you very much! 👍👍👌👌😊😊
Great beginner tutorial for any printer using cura
Thanks for the detailed video!
Thanks very much for this very informative video, I recently purchased an Ender3 v2 as my first printer, I’ve got a lot to learn, but this video was a great help.👍👍
One of the best!
Very clear and informative video, thanks.
my seam is bulky inside and out. any advice on how to reduce it? thank you. great video
Thanks for sharing👍😀
I prefer the Prusaslicer quality and design
I like that the filament, and printer setting's are separate for the slicing proces
Happy holidays to you all 👍😀
I am new to 3d printing,my Ender 3 V2 is on his way home :)
I am planning to print a Heroquest board.
I will use 0.2 nozzle and highest detail possible.
The items are Tiles about 100x100x5mm and the detail is only at the top.
Which is the best orientation for maximum detail?
1) Horizontal :The tile sit on the bed with the nozzle "looking" the detail
2) Vertical: The tile sit on the side with supports and the detail "looking" me.
You got your printer gcode start and stop info. I'm currently having some problems at the end of the print where it's errors out on excluder stepper values. Something with absolute and relative values I think. Not sure why it started doing this all of a sudden.
Hi. Can you make a video tutorial on what I have to change to make a filament change, I believe that is M600 command, in the ender 3 v2?
I don't believe the Ender 3 v2 will understand the M600 command sadly.
Have link to vase?
Everywhere online I see how Cura is the way to go for your ender3v2 but now I every time I try to download the thing it won't show up on my homepage never seems to wanna fully finish downloading and now it's made it so I can't use my slicer that came with the printer I can't seem to purge it from my computer no matter what I do. I've gone through in a raced it everywhere I can find it and yes when I try to reinstall the old slicer it keeps telling me that it can't because Cura is using some of resources. Secura won't work every time I try to use it I have to go through the same set up routines and never actually let me use it. And I can't use the slice of the comes with the reality and there's three V2. So now basically because I tried to download what everyone says to download I can't even use my printer. I watch the videos of people showing you how to install etc. but it's always different than what shows up on my screen. I've tried for your recent both of them I tried to repair the program on the original slicer . nothing works!
Have you made sure it’s still not running in task manger? I had the same problem with discord took me ages to sort the news out I could not re down load it even tho i uninstalled it lol it was some how still I’m running in task manger
So for someone that hasn’t even turned on a computer (except cellphone) in last 20 years. What kinda learning curve we talking? For 3D printing and slicing. Trail and error or should I sign up for classes now ?
Wow well it could be quite a steep curve in your case. If time is important to you then signing up for class is would give alot of value. Otherwise, learning by yourself could be fun, so many things to learn, like an adventure! Just my opinions
Super interesting tutorial, thank you !
Thanks. Very useful video !!! Well done !
I'm curious, I just got ender 3 and it came with creality slicer but my thing is the program seems to lag really bad that i couldnt even begin to learn and understand it, is it the program itself or possibly the laptop?
No lag for me, your laptop is very slow
I now use the Prusa Slicer, and it works OK, but; I think Cura is better. However; I don't think the people at Cura want Creality People using their Slicer. They even say; "Just buy our printer." As if everybody could come up with $2,000.0 to $3,000.0 thousand for a 3D Printer.
VERY HELFUL! THANK YOUI!
How do you even get "print settings" up to start this?
Click the words " Standard Quality " on the top right corner
@@izzulhaziq4898 Thank you - that wasn't obvious
new subscriber here love your videos
i really think you should change the color of your background, a nice grey or wood panel would be nice.
I stopped using Cura at version 4.10.0 because they made it to purposely crash the printer nozzle of the CR 10 into the paper clips. That is no mistake, but is something intentional. I don't harbor any hatred or contempt against those people, but; I know when it's time to leave something alone when there is hatred. The makers of Cura don't owe me anything, and I'm thankful for the good times and their generosity. But, some time there is bad blood, for reasons I do not know.
Him using his middle finger to point at things is all I could see when he was talking, it's weird when people do that.