Faucet Won't Fit In Vanity? Use This Trick!

We bought a vanity from Home Depot. When we went to install it we found out the faucet we bought was too big for the pre drilled hole. We fixed it by drilling the hole bigger. Tune in to see how it was done.
Hole Saw Arbor
www.lowes.com/...
Hole Saw Bit
(Pay attention to size you may need a smaller bit or a bigger bit)
www.lowes.com/...

[@alkeech6278]

Just what I needed to know. Thanks!

[@growingfromscratch8517]

Yep, just ran into this same damn problem. Disgusted with Home Depot for not selling compatible pieces.

[@deec9200]

Great idea! Thanks for sharing.

[@reneerussell8894]

Thx for the video and info ! I subscribed, so now you have another 😊. anyway , do I need clamps if my vanity only has one hole ? Also, I am purchasing a floor door stopper and will be needing to drill a hole into a tile floor , so do you think I can use this device for that as well?
Thanks again !

[@cindytolliver3578]

You made my day! I'm so happy!)(!

[@erikkarling2176]

If the hole saw doesn't have a pilot bit, then you can drill through the wood first and place it on top like a template.

[@reneerussell8894]

Sorry 1 more question for ya.. I haven’t purchased the faucet I want yet , what if the pre-drilled hole in the vanity is too big ? Do you have a part or suggestion for that by any chance?
Thx
Renee

[@mrss3058]

Camera! The focus....😂

[@poboutin]

Would be nice if the camera actually focused on the drill when making the hole..

[@marccampbell9448]

Nice idea, although why not use a thinner piece of wood on the top side of the C clamp to prevent any damage.. I know you use the paper towel and it works… But having a piece of wood would improve, tightening, and not crack anything

[@deegall6160]

Why don't they make adapter kits.

[@ObliviouslyGifted]

For those that don't know drip a little water here and there around the hole while cutting!
HELPS WITH THE CUTTING AND SAVING YOUR BLADE AND TO PREVENT CRACKING AND BUSTING THE COUNTER OR VANITY!!!!!!
THIS CLOWN HERE!...😒🤡

[@UtubeAdviser]

Why don’t they sell this diamond milling bits at Home Depot or Lowes??? I went to both stores and they don’t carry them. I also check northern tools and equipment and Ace Hardware and they also don’t carry them. That sucks!! You can only get it at Amazon!! Yikes!!! Why is this tool so unpopular to stock at any hardware store?? I don’t get it? 😮😮

[@vickieayres3879]

I am so afraid I’m going to crack the ceramic.

[@zetaminor77]

To prevent cracking I read that you can use some water to cool the area down, and also to only run the drill for 10 seconds at a time to give the area time to cool down