Compelete Installation Motorized Bike Kit Step By Step, How To Install Sprocket Correctly P2
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2022
- Compelete Installation Motorized Bike Kit Step By Step, How To Install Sprocket Correctly P2
hello everyone welcome back to multi-channel TH-cam services and entertainments
this is part 2 on how to install sprocket 44 tooth the only correct and right easy way.
it's very important to make straight and level and best way to do that is to watch thus video and follow instructions
use drill with clutch gives you right tightness
you may di some sanding to one of 2 rubber mount if it's not straight
thank you for watching 👀 🙏
subscribe for more videos like thus or random videos we upload videos regularly and Randomly you may like a video or so and consider subscribe like and share 😊 - แนวปฏิบัติและการใช้ชีวิต
👋👋👋👋👋
Thank you so much and all the best 🙏🙏🙏
thank you for watching 👀 🙏
please support our Channel ❤️
do rear wheel bolts in a star tightening wont have all the problemes
No, they shouldn't, if the bolts are tight enough equally and all the locker washers so the bolt never loosen, thank you and all the best 🙏😊
Whats the best advice that you can give when it comes to alignment of rhe rear sprocket... Im having a problem with that...
Hello my friend, the trick about wheel alignment front or back is to make sure all spokes are tight enough not too tight or too losse,
All are have same tension, then start to align the wheel rim buy tighten the spokes on side of the wheel is leaning away, make sure never tight too much, thank you and all the best 🙏
@donaldpeltier7855 tight all loose spokes then tight spoke where wheel rim is off or not straight opposite side
Does it matter which wheel it’s on
Most bicycle tires should fit except new bicycle with new hub wider ones ,
Thank you and all the best 🙏
What size socket for bolts
21 mm , deep bolts,
all the best my friend 😋
I don't have spring
Use any spring such as from screen door, or old metal bed, or you can make your own spring, twist a piece of wire steel around screwdriver and heat it with touch than put it immediately in old engine car oil.