วีดีโอ

There are 2 methods 1- connect camera directly to computer using charging port USB if this doesn't work step 2 2- remove SD card from camera and connect it to computer USB port or micro SD card, you can use SD card adapter such as sd memory card, or USB adapter, thank you and all the best.

Yes I agree, maybe next few years dji can do improvement, thank you and all the best 😊

Yes, that's right, this spoon easy quick method in case no can lid opener, thank you and all the best 😊

Some of jar lid stuck very hard onetime we made a challenge with some strong people no one could open at all....we have been using spoon method for many years with all types of lids never had or have any issues, if fact it's very safe because 1- the spoon is very smooth. 2- all you need very little foce to release the gas inside the jar and easy done, thank you 😊

Yes, that's right, as the older Jr is the harder to open the lid Because of the gas inside the gar especially the pickles ones, thank you and all the best 😊

It's funny sound , especially I install it on old van 😄, thank you and all the best 👍

Awesome, that's very good, I was looking to buy tire with rim but they are expensive some of them about $35 Tubeless one, and the hard rubber tire about $50, I am trying to find away to make my own or custom made tire, thank you so much and all the best

It sounds like the rubber belt or the bobbin winder mechanism in your Singer 5805C sewing machine may need attention. Here’s how you can address the issue: Steps to Fix the Bobbin Winder: 1. Check the Rubber Drive Belt: Open the machine's casing (if accessible) to inspect the rubber drive belt attached to the bobbin winder. If the rubber is worn out, cracked, or loose, it will need to be replaced. Replacement belts for Singer machines are widely available online or in sewing supply stores. 2. Ensure Proper Engagement of the Bobbin Winder: Make sure the bobbin winder is engaged correctly. Push it to the winding position (usually to the right). Some models require a firm push to lock the mechanism. 3. Clean the Mechanism: Dust and lint can build up in the machine and interfere with the bobbin winder. Use a soft brush or a vacuum with a small nozzle to clean around the bobbin winder area. 4. Lubricate the Machine: If the machine hasn’t been oiled in a while, it could be causing parts to stick. Use sewing machine oil (not WD-40) to lubricate the moving parts as per the manual. 5. Check the Motor Belt: The motor belt that powers the machine may also affect the bobbin winder. If it’s slipping or worn out, it could need adjustment or replacement. 6. Test After Adjustments: Once everything is cleaned, adjusted, or replaced, test the bobbin winder by engaging it and pressing the foot pedal. If these steps don’t resolve the issue, it might require professional servicing. Let me know if you’d like additional clarification on any of these steps!

@ thank you so much for helping. I saw that my driving gear was worn out. Can you give me some advice on how to fix it? can it still be saved? Or do i have to buy a new one?

@zoelagarde5091 , my pleasure, you are very welcome, I am glad you found the driving gear was worn out at least you know what is the cause, Unfortunately moat gears if worn out very hard to fix without lathe machine, to fix it by using hard tools it will take time and patience and Precise measurements, and it may not work properly because gear teeth must be exactly same and strong too, so the best option is to replace it, you can search online hopefully you can find same part or similar one, try this website www.singeronline.com/simo58.html Thank you and all the best

My pleasure 🙏, thank you so much 😊 and all the best

My pleasure, I am so glad 😊 to read your wonderful comment, ❤️ thank you and all the best 🙏

Yes, it's important and safe to unplug the power cord, thank you so much and all the best 👍

"Haha, I guess that just means it's a classic! They don’t make tools like they used to, and this one has clearly stood the test of time. Still going strong!" Thank you so much and all the best 😊

My pleasure 🙏 ☺️ 😊, thank you so much and all the best ❤

"Thank you for sharing your perspective! I’m always looking to improve, so if there’s something specific you think I could do better or clarify, I’d love to hear your thoughts. Your feedback helps me create better content!"

If I can do it why not, and that's what diy for, thank you and all the best 👍

Yes , after touch time , got it done, thank you and all the best 👍

Yes that's right, but unfortunately I didn't have rimming cleaning tool with me, the van parked on the way, and what made it worst was the weather got really cold and wet, this type of tire is very heavy duty thick but at the end it worked, when I used cement rubber to push rubber through inside the tire, thank you and all the best 🙂

I couldn't use vice grip because the bolt or the screw was completely flat with tire nothing to grip on, so I used sharp cutter plairs after few minutes fight got it out , thank you 😊

My pleasure 🙏, thank you so much and all the best 😊❤

Hello my dear friend, you're right, it does get very hot and increase rapidly but I think for price it's not pad I can use it for other purposes, The good one can cost up to $150 or more, I don't do a lot of electronics repair, this soldering hot air good for old electronics components, thank you and all the best

If your black box (or dashcam) traffic recorder can't connect to the camera's WiFi, here are some troubleshooting steps to try: 1. Check WiFi Settings: Make sure WiFi is enabled on the dashcam and that it's in pairing mode. Some dashcams require pressing a specific button to start the WiFi signal. 2. Distance to Device: Stay close to the dashcam when connecting, as the WiFi signal might be weaker at a distance. 3. WiFi Frequency Compatibility: Check if the camera’s WiFi is 2.4 GHz or 5 GHz. Some devices (like older phones) might only work with 2.4 GHz. 4. Forget WiFi Network: If you've connected to this network before, go to your phone’s WiFi settings, "forget" the network, and try reconnecting. 5. Password Check: Verify the WiFi password in the dashcam’s manual or on the device’s screen. 6. App Permissions: Some dashcams use a specific app for connection. Make sure the app has necessary permissions (e.g., location, WiFi) on your phone. 7. Firmware Update: Check if the dashcam has the latest firmware update, as this can fix connectivity issues. 8. Device Compatibility: Some dashcams are only compatible with certain devices or operating systems, so verify compatibility. If these steps don’t work, try restarting both the dashcam and your phone, or consult the manufacturer’s support for further assistance.

I did this for my Neighborhood, when I do official job I put my work gear on. Thank you 😊

My pleasure 🙏, thank you so much and all the best 👍

Yes, you can install Kodi on the HY300 projector if it runs an Android operating system. Most Android-based projectors allow for app installations directly from the Google Play Store or by sideloading APK files. Here’s how you could install Kodi on an Android-based HY300 projector: 1. Google Play Store (if available): Open the Play Store on your projector, search for "Kodi," and install it directly. 2. Sideloading Kodi APK: If the Play Store isn’t available, you can download the Kodi APK from Kodi's official website on another device and transfer it to the projector using a USB drive. Then, enable “Unknown Sources” in the projector’s settings to allow third-party installations, navigate to the APK file, and install it.

@WorldRandomVideos sorry, i mean trouble install update on hy320 every time i open projector show kodi update but when i click update then trouble with installation update.

If your HY300 projector is having trouble updating Kodi, there are a few troubleshooting steps you can try: 1. Clear Cache and Data: Go to the projector’s Settings > Apps > Kodi. Select Clear Cache and Clear Data. Try updating Kodi again. 2. Uninstall and Reinstall Kodi: Sometimes, Kodi updates fail due to compatibility issues with the current version. Uninstall Kodi from your projector, then reinstall the latest version. You can reinstall from the Google Play Store or sideload the latest APK from the Kodi website. 3. Check Storage Space: Ensure your projector has enough available storage for the update. Kodi updates can require extra space temporarily. 4. Network Connection: Check that your projector is connected to a stable Wi-Fi network, as a weak connection can interrupt updates. 5. Sideload the Latest Kodi APK: Download the latest Kodi APK file on another device and transfer it to the projector via USB. Then install the APK directly on the projector, which should update Kodi to the latest version. 6. Factory Reset (Last Resort): If all else fails and you’re experiencing other issues with apps, a factory reset might resolve them. Just remember that this will erase all data, so make sure to back up anything important. Let me know if any of these steps help or if you need more assistance!

Hello my dear friend, I don't blame you, it's confusing for me what about watching it makes even more complicated, but I had done everything possible to make it right nothing worked, it was factory defected, if you can watch this video you will understand better link of the video below, thank you and all the best 👍, th-cam.com/video/yHcEUMc_eZ8/w-d-xo.htmlsi=eQD7szA4f7sUxGIK

The back camera mount on slide one way only so it's Surprisely upside-down, I tried everything to correct it but nothing worked, So I had in wrong fitting but it Worked, here's the new video, th-cam.com/video/yHcEUMc_eZ8/w-d-xo.htmlsi=eQD7szA4f7sUxGIK

I am so glad to read your wonderful comment 😀 ❤️, thank you so much and all the best 👍

Thank you 😊 so much 💖

Hello my dear friend, please try the following steps: 1- turn your wifi router off wait for about 1 minute and turn it back on, wait few seconds until router connected then try to connect projector to wifi again. 2- try to connect projector to 5g first if it's still not connecting try 2.4g if you have it, make sure from your wifi password is 100% correct. 3- if still not working, call your internet provider company maybe your router has something wrong or not allowing new devices to connect. 4- try to use different type of wifi for example your smartphone Hotspot wifi broadcasting, if still not working , maybe your projector is factory defected or projector wifi receiver is bad, I hope that will help you to solve the issue, thank you and all the best 👍

Try the following steps 1- some SD memory cards are bad or Corrupted or don't work, when you insert SD card in your laptop or computer and not reading or showing nothing that means SD card is bad. Replace SD card with a good this will solve the problem. 2- SD card must be forgotten by camera default settings, if you format it make sure to choose the right mount of gb supports the camera and right videos and photos format supported by camera for example mov, mp4, Wmv, AVI etc, I hope that will help you to solve the issue. Thank you and all the best 👍

Try to match the color it it's yellow ball use yellow marker or nail pollich the closest possible color you have to blend it in, thank you and all the best 👍

Hi my friend, I am happy to help 😊

Hello my dear friend, while doing Exercises some little sound or it makes very low noise from joints, but if all bolts are tight enough barely hear any noise, I am sorry about the background music or added music some because of copyright issues, I am trying my best to make my video ls better for viewers thank you so much 😊 and all the best 👍

Thank you so much 😊, yes you are right but those are heavy duty and I never have any problems everyone I use them, the stoppers work OK, it's important to set them up on level ground, I tried to make them simple and safe and light wieght and they are so, best regards 👍 😀

The app vlc player is to play the video because the video format is not supported by my phone android, Thank you and all the best

Hi brother, I really appreciate 🙏 ❤️ your wonderful comment, I am glad to help 😊, thank you so much and all the best 👍

salam alekum Brother, I really appreciate you ❤️ 🙏, Allah blesses you and protects you , thank you so much and all the best

I couldn't find concrete to test it on, please watch this video, th-cam.com/video/abbqX6T_xrw/w-d-xo.html

I am so glad to read your wonderful comment and great support, thank you so much and all the best 👍 ❤🙏

Hello my friend, display screen if it's bad damaged or broken it can't be fixed and needs replacement, Thank you and all the best 👍

@@WorldRandomVideos kya ap batasakte kanhase purchase karasakta nhu ap janti ho kya

I tried to search online but there's no display screen for sale, only available some other parts, I think the best way if you can find keyword not working for sale will be best option, try eBay, thank you and all the best

Some of bad quality batteries they don't lazy long especially if they not used for few months or so, cheap quality batteries designed to work for a specific time, if you can dassemble the laser to test the battery with multimeter after recharge it test the battery voltage if there's no voltage or very low voltage its bad need to be replaced. If the battery is holding voltage, then the laser is not working, I have several laser not working anymore, They're not easy to fix because of very sensitive electronics components, thank you and all the best 👍

Hello my dear friend, thank you so much for your great advices and valuable information, that's exactly right I thought to do just what you mentioned , and this will be next video to test the torque and strength of this ratchet, that will be much better and for test with it with manual torque ratchet, thank you again and all the best 👍

Try to format it, or delete some files check them before delete or format, Incert micro chip use adapter if need to, then check your files on the micro chip or SD card save fes if you need them then format ot to right amount And done, thank you and all the best 👍

Yes my friend, I tried to add extra support stoppers but after few time use still holding very strong so I left as is. Thank you so much and all the best 👍

I knew it was not powerful enough, But they send me some credit back and keep the ratchet, I probably can use it for small bolts or nuts , thank you and all the best 👍

Yes I had to clean it after with brake cleaner, thank you and all the best 👍

Yes, the 2×6 stoppers are very strong, can stop the car, important safety so tires never run over. Thank you so much and all the best 👍 🙏🙂