HOLIDAY Dent Fix!!
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2021
- secretpdrpaintlessdentrepairtr...
Two-way spring will be put to good use this Holiday Season as I attempt to fix this dent in Grandma's minivan. My 12-hour repair was compressed into 16 minutes for your viewing pleasure.
Training Email Me
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
www.yelp.com/biz/dent-discoun...
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun... - ยานยนต์และพาหนะ
![ILLSLICK - Homies [Official Music Video]](http://i.ytimg.com/vi/r6jGK7MumF0/mqdefault.jpg)
It's hard to imagine anyone saying anything negative about that repair. I'm a 25 yr pdr technician and fix dents like that almost daily. I'm not afraid to say you're a beast and one of the best out there. Good job.
Thank you Michael I appreciate that.
People will hate before watching the video. I will click on their channel and they have no work to back up their thought. It’s all good
th-cam.com/video/GH_3dJFNbdE/w-d-xo.html
@@DentDiscountPDRBodyShop
Its cheaper to buy a new hatch.
@@4uh8rz2nv IF you find one with the same paint and IF you’re going to install it yourself sure. Outside of that? No it is not.
I agree with Ka gee
I’ve been a detailer in dealerships for the past 40 years.
I’ve never seen a PDR guy that would touch the dents you repair.
The PDR guys in this locale remove parking lot dings.
I’m totally amazed at the work you do.
Please keep the videos coming
Thank you George for your 40 years of experience..Mr Steel really appreciates your thoughts.
im best all over the world
@@abolfazlkhorramipdr noooott
I am new I like
Well Done. You are a very skillful man.Congrdulations.
I'm an auto damage adjuster for a major insurance company. I literally would not have hesitated to put 8 hours plus paint on that panel. Along with all the r&is that go along. I'm amazed with this video! Way to go dude keep it up!
Thank you so much for your comment I really appreciate it Aaron
I been watching ken's videos for several years he is the best ever like a 10 star. He has no fear on any ugly dents.
To be honest even with a stud welder I would have struggled with this one, you are a true dent ninja, I am going to try flipping my hat around next time I am faced with a challenging repair like this!
Great comment put a smile on my face
This is not a stud gun job really. Start with big suction cups (real ones, not the toys the kids have today). Then move to wiggle wire and body keys (modern version of old fashioned washer welders). THEN use the stud gun for the smaller stuff.
Although, frankly, the use of glue plates here, in my opinion, is a better way.
The PDR guys have a lot of really amazing and innovative toys. If I was still doing repairs this big, I'd be adapting many of them into my tool box of skills and methods.
(For reference, I came out of retirement to metal finish small flaws on the assembly line for a major auto manufacturer...so I metalwork every day. Its just super little stuff now. I never really get to do big repairs anymore)
@@VanishingNomad Yeah I would have used body keys forsure, it would be an uneven mess with using just a single point contact stuff welder. One of my guys prefers wiggle wire and hates the body keys so to each their own I suppose. I have the pneumatic cup system but never use it anymore after letting the keco glue pulling setup in my shop.
@@VanishingNomad Hey this is a totally random question but do you have any experience with shrinking dollys?
@@VanishingNomad What kind of defects do they get on assembly lines?
Awesome video sir. I’ve was a body guy as well as a paint refinisher. This type of work is cleaner, more efficient, theres no filler, or grinding down panels. I would love to learn the trade. I’ve always wanted to do paint less dent. I’ve been a mech for a dealership for the past 23 years
Hey been in business since 94. I was taught to repair much larger dents even ones I couldn't make perfect.. at 54 now winding down a great career in PDR and just chasing a few more hail storms. Great work Man of steel
Manofsteelpdr.com
I appreciate your comment
Brilliant work
Thanks for a real pdr video, you actually showed how it's really done with ripples flaws and all. So many others wouldn't show a close up but only angles from a distance. Great work and video's
secretpdrpaintlessdentrepairtrainingonline.com/
Thank you you’re welcome Charles
I just released another dent video you can check out
You have a talent and patience, great job!
PDR guys in my area would never attempt the stuff you do. Amazing 🤩
Yes I'm new, no I am not a PDR tech. I just had some PDR work done on my new 4runner. Came out fantastic, now I'm fascinated watching PDR videos. Well done and be safe.
I planned on skipping through the vid but was so fascinated I watched real-time end to end. You are a PDR God sir. Much respect for your skill and patience.
as a collision tech i always admire PDR. beautiful work. wish i had the patience. i have been close to metal finish on alot of work ive done but i always need a little filler somewhere. hats off broski!
Thank you for your comment
Замечательная работа. Волшебник!
I gave you a thumbs up knowing we have a language barrier
Thank you
@@DentDiscountPDRBodyShop hey! Man of steel, I'm new here and I was wondering if you could remove dent from my car car
It is amazing seeing he metal moving as you want, neatly reversing the impact
I ve been watching so many of your videos lately and its truly amazing the level of skill and perfection that you have achieved with these repairs . what you are doing is a form of art , the amount of knowledge is unreal and thanks for passing on this knowledge ! . Keep the videos coming !!!
Thank you for your comment
I just posted a new video take a look
Ustadadir. Ama
New here to man of steel. I’ve been doing PDR for a manufacturing automotive company for 1 year now and absolutely love it. I’m always watching PDR videos to learn more techniques from the pros. Awesome video keep up the work. Maybe one day I could do big repairs like you. Repair looks like glass btw excellent work
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Another awesome dent removal! There’s
No one else that has this level of understanding of moving and manipulation of metal!! Thanks again man of steel!!
Thank you for your comment
Mate, you're a bloody legend.
I'd love to be able to learn to do what you do, once I'm done with chemo if all goes well I'm definitely gonna give this a try.
Technique and patience is inspirational.
Goodluck bro❤
BOL
I’ve been an Autobody repair tech for 10 years and I honestly respect your work! I’ve been watching you to better my craft and am looking into getting some glue tabs because of you! Thanks a lot for your work.
I love the name meditation spaceship. That is awesome.
That is what I’m into on my free time
Great job! You set an extremely high bar. Thanks for doing these videos!
Thank you for your comment
Found this video by accident, outstanding workmanship. You are increadibly the best I have ever seen!!
Was so enjoyable to watch. Thank you!
I appreciate your comment Stacy
This man is a threat to the collision industry and should be stopped at all costs!!
Wow, you did an amazing job. Never seen a huge dent like that repaired before
Thank you
I’M NEW!!! 🤓 I find this so fascinating! In Sacramento I once heard about a *new* shop with a bunch of German guys in lab coats that would use rods and leverage to work dents out, they said it was “the latest method from Germany”, that was like 15 years ago. I always wanted to see them work, I think the old way of replacing panels, beating panels or filling dents with bondo and painting is archaic… This is cool! 😎
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Your in Sacramento? That's crazy didn't think I would see anyone from my city here hahan
The tension loaded spring is freaking genius!
Thank you for your comment
I just posted a new video take a look
You are so clever, I just can't watch this without wishing I was you. And I love the fact that you are not flaunting your ability to fix any problem. Man of steel, yeah, that's what you are. THE MAN.
This is an awesome job. I have the same dent on my hatch and could not find anyone in my area that would do the job. You are the master of PDR.
I’m giving a big thumbs up on all of them, you are a inspiration to me, to get better on pdr and learn new things
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Man of Steel does great work, no doubt. However, I’m continually impressed by the strength of the automotive paint bond and how it just doesn’t rip off the panels when so much pulling pressure is exerted on it.
Yes I’m impressed as well with the glue daily.. some guys can pull a dent out 100% with glue.
Thank you for your comment
I know, right!
I am astounded at seeing how strong the actual paint is!
Ustalar gerçekten işin ehli. Tebrik ediyorum. Türkiye'den sevgiler.
Ive been a pdr tech all my life 25 years old now and started when I was 7 (dad is a retired pdr tech). This is absolutely crazy man. I’m a route tech and service mostly dealers with a good amount of retail and a couple hail cars a month. You are diving so deep into pdr and completely blowing my mind. I have 5 stars on google and consider myself and my partner to be reasonably good due to the satisfaction of our high end dealers we service and minimum complaints received. I honestly can’t believe you made that look so good and I always knew there were guys better than me and guys worse than me. But I’m pretty confident saying that you are one of if not the best techs I’ve seen. I love watching your videos and aspire to be able to branch into more collision pdr. If I came across a dent like that at a dealer I’d turn it down and if it was at a body shop I’d push to paint it. But no way in hell I’d be able to finish it. But I guess I don’t actually know I’ve never spent 12 hours on a dent lol. Keep up the good work man, you rock!
Brandon welcome to my channel thank you for sharing
@@DentDiscountPDRBodyShop Let's go Brandon!
Oops *Brendan
Parabéns pelo trabalho sou fã de seus trabalhos 💪🏻💪🏻👊🏻🔨🔨🔨
Been with a desire to do exactly what you just did. Always wanted to be in Paint and Body but allergic to many of the products like fiberglass and Bondo. But this puts me in the field without dealing with those products.
It is so satisfying to watch someone who knows what they are doing and so kudos to you my friend. It takes years of experience to do what you do and I take my hat off to you.
Thank you
Love what you do, I think if somebody has a team of guys like you you would put most auto body shops out of buisness! If I was ever going to learn a new trade, this would be it!
Very well put Alfonso thank you for your comment
Man of Steel your my hero. Learning so much. I hate sanding and painting. Newb.
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment Stephen
I appreciate you sharing your skillset
Sono un carrozziere in pensione. In ogni caso la verniciatura va fatta perché se la.vernice e scrostata va rifatta. Poi col tempo che.ci ha messo si fa prima a stuccare e riverniciare .Ciao
It amazes me every time I see you pull a new dent ,awesome to watch how you make it disappear
Wow, I'm new to the channel and completely blown away with the quality of work done here. Bravo.
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Let me know when will be your next training session
secretpdrpaintlessdentrepairtrainingonline.com/
Send me an email through this link and I’ll set up training for you.
Thank you for your comment and question Devon.
No filler, no painting fab
@@DentDiscountPDRBodyShop cost beginner two day training sir?
th-cam.com/video/GH_3dJFNbdE/w-d-xo.html
Hi sir please watch my videos i am dry denter
Man, I've been living with a big dent for years, the body shop said it would be a $6,000 repair and I just didn't want to do it, but you make it look like I can do this at home with enough time and the proper tools!
Pdr-Training-tools.com thank you for your comment
new to the channel, i am completely blown away with what you can accomplish with your pdr knowledge!
You have patience of SSTEEEEEL! Truly talented.
It’s always amazing to watch the “magic” of PDR.
Thank you
Thanks for everything that you share. I have been around the world many times as a hail damage repairer and Gary from Pollard's auto salvage now wants me to go out with 35 acres of dents and see what I can do. I love you and hate you for raising the bar so high!
Thank you for your comment I really appreciate it
Clean restoration by PDR. Awesome job done!
I was a Toyota technician in the late 1980's early '90's and first saw this method used in the body shop.
PDR works a lot better/easier on the more modern 'thinner' steel panels and the hot glue has gotten a lot stronger since then and easier to remove.
We also had the welded pin/stud system for the really bad cases.
You couldn't get hold of replacement panels from Toyota at a reasonable price back then as they were shipped from Japan.
Not able to 'work' anymore due to broken neck but still do as much as possible on my own and neighbor's cars.
It helps to keep me active and occupied.
I also use home made wood 'dolly's' to help prevent more paint damage.
When heating the area I use an electric heat gun, rather than a flame torch.
Nice to see the old panel beating skills still being used, rather than simply replacing with new ones, it works out quicker and cheaper in most cases.
Thank you so much for your comment. I really appreciate it.
You sir are quite the professional , amazing work !
Thank you for your comment
This man is an artist.
You are awesome with this process. Got to be the way forward in repair. Who wants a car with filler all over it. Clean as a whistle your repairs are a credit to you thanks mark south Wales GB.
The skill at that stress relieving with hammer beats is music to the eyes
Man of Steel...Clark Dent!!
I got a nasty rear quarter dent that 2 PDR guys passed on. I need someone like you near me
Absolutely awesome talent. I wish you were closer. I have a dent on my Mini Cooper and haven’t taken it to a shop because I don’t want it grinned and bon-do on it. I prefer to wait and find someone with those talents where I live. Great job 👏
Thank you for your comment
NEW... I am Amazed on how you pulled this dent out, I'm old old school from 40yrs back drilling holes and using a dent puller, with heat and grinder to get the metal back in shape then filling in the imperfections with Bondo... Excellent Job... 😀
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Just amazing way to repair the dent. Love it.
WOW Amazing. I have seen a lot of PDR on youtube and without a doubt yours is by far a well detailed video. Just wish I could do a job as perfect as you have just shown.
Thank you for your comment
Pdr has came very far was sent to a pdr school 30 years ago would love to get back into it you do a amazing job!!!
Thank you for your comment
This is badass. Skill and patience provide great results
Thank you
Great tools, great skill, most of all patience.
Thank you for your comment
You sir are a bad ass metal worker.
Ken worked on a few dings/dents on my Honda s2000 a few years back, awesome work and awesome job. Glad to see you're prospering buddy!
Hey it’s my buddy Eric thank you so much for your comment
You should have a few more dings on your S 2000 for me to fix laugh out loud
@@DentDiscountPDRBodyShopIf I was still living in the bay area, I'd bring my car dings/dents to you for sure bro!
Never have I seen this kind of method and I’m real impressed!
Thank you for your comment
New here, your work is art vs intuition vs science, remarkable!
New to your channel; always find paintless dent repair fascinating! Thanks for showing us the complete process, instead of "I'm doing this", and not describing it. Thanks!✌️❤️🙂🇨🇦
Thank you for your comment
السلام عليكم
انا من العراق عندي مرسيدس فيانو 7راكب الباب الخلفي(الجنطه)عالق ولم يفتح علمآ السنتر يعمل طبيعي ولا أعرف طريقه لفتحه ميكانيكيا وشكرا
@@mohammedmom3238 sorry, but I'm a pastafarian.
I’m just starting out glue pulling I’ve been a certified tec for 30 years you do amazing work I’m a new subscriber would love training on this you’re awesome
What an amazing job, you nailed it.
Thank you
Wow, you are a true artisan. Absolutely incredible. I just now found your channel, and I'm glad I did.
Wow, thank you!
That’s incredible! This is my first time watching you. I’ve hired DentPro a couple of times and have never been satisfied. It’s cool to see it actually can be done!
I have been looking for a carrier change and I think I have found it!!! I purchased a beginner's kit and was successful in removing several dents on my Dodge 1500 pick up. It was very rewarding and exciting. I'm HOOKED!!! Would sincerely enjoy doing this kind of work and am interested in taking a beginner's course soon. I'm so pumped I am about to purchase a complete PDR tool set from eBay. Thanks for this video.
Been doing dents for 12 years now. I’ve never gotten into the collision tab systems. Like Keco or the one you have, but I really like seeing you kill these massive dents. Very impressive. And no. I wouldn’t have taken on a job like this, most likely. Unless it was Push to Paint. That’s always easy enough, and I don’t have a shop, yet.
I'm new.pdr has come a long way since I was bending old screwdrivers in the late 80s and using them as levers.
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Fantastic work,I would love to learn this trade
Amazing. You’re a true artist. I’ve never seen anything like that. The shops in my area would have replaced the whole door.
Thank you
I’m a retired pilot, and a couple years after retiring got the big renal cancer word. Lost my rat kidney, chemotherapy, etc. getting around,but nothing like I was. A short time after retirement, I checked in on trying to fined out on how I could learn how to do your kind of work just to stay busy. First time here, MAN OF STEEL! Nice stuff! Congratulations on a great job. Ronnie East,Tennessee
Pdr-Training-tools.com my emails on this link if you like one on one training
Professionalism at it's best 👌
This is the second video I watch for you and I'm absolutely amazed. You're incredible!
For my DRP, I would've had to replace the panel cause the repair time would've been to high. But if it wasn't for DRP, I would've fixed with a stud puller and obviously would've had filler and to repaint. After watching this, I feel I've been doing it wrong this whole time.
Thanks for these videos and keep it up! I've got a lot of research/practicing to do.
Right on thank you for sharing
Wow, first time I see this, you are the Man of Steel.
Most PDR Tech dont even want to touch this size of dent.
Your absolutely correct. It’s too much work. They make easier money on the smaller Dents. Thank you for your comment
Just discovered PDR, and your channel. Love your narration, the way you explain things is great and your voice is nice too. This looks like a cool line of work, very satisfying! Thank you for these videos!
Thank you for your comment I really appreciate it
I’m new to the channel I just rear ended someone today, and that’s why I’m here 😅. Have a great day!!
Fantastic work I can tell you're a perfectionist! Would have loved to see a little paint touch up on the rust spot though :) Great job!
Customer prefer to do his own touchup
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
amazing work sir, i just finished my PDR training. PDR is truely a work of art versus general mechanic / body painting. I hope you charged a good amount for the job!
Amazing Repair ❤
Awesome. That's all I can say. I do paint and body and been self taught on pdr. Always something to learn. Keep making videos your a talent that's hard to find
Thank you for sharing
I greatly admire your skill and method of fixing this massive dent, doing it like this saves a lot of mess and resources, you could just do a tiny paint fix on the rusty bit for very little cost.
Customer elects to do their own paint touch up
Amazing work ! Awesome well Done 👍 !
After watching your technique, anyone who would grind the paint down to steel and weld on pulling pins is pure lunacy. That shop is just gouging the customer for work that they dont need. Your MAGNIFICENT.
Hi there, I am Albie, I live in South Africa.
I am not a panel beater or spray painter, I just happened to try to fix and spray my car, first try, so I am always trying to learn and teach myself, because I usually don't have enough money to take it to someone.
First time seeing your videos, and I like the way you work, and also the way you explain.
Well done 👍
Awesome job, it sure beats the price of replacing body parts and have them repainted
You do an awesome job. I've tried to do this. It take some patience. Your content Rocks.
secretpdrpaintlessdentrepairtrainingonline.com/
Thank you for your comment
New here Goodna Queensland Australia have watched PDR first hand this is incredible work and have the opportunity of a lifetime to learn this skill will be buying lots from this channel the best guides and ideas hats off to you mate this is truely an art of its own don't care what anyone says liked and subscribed we need more like you willing to teach the world it's rare to see a PDR guy give guides to the world everyone hides there technique
Welcome to my channelpdr-training-tools.com/en/products/glue-pulling-kits-(gpr)
Your are an actual artist of your trade
Great job very professional and your Santa story was amazing 😀
New subscriber here. Your work is incredible! I've always been mechanically inclined, but I've never gotten into body work and I'm just starting out. I've always been curious as to how PDR works. Thanks for the videos!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
I’m new to the Chanel
and I alway work the metal because my teacher always told me the metal always wants to go back to it’s original place.
But this to me it’s wow with out painting you’re the Man of steel.
I thought I was good wow
I have a next level to go up too. 💪
Teach me master 🙏
Welcome to my channel thank you for subscribing
simply amazing. This is ART. well done !
Im an estimator and I’d be replacing that panel all day long. Amazing work!
Wow that was like magic I've done body and fender repair and mixed and painted some and ive always wondered how that was done when that first came out it was like a secret but u showing how its done and the tools man ur a great teacher this is my first time watching u and i was just at ahh i want to learn how to get down like u man that was just fantastic good job
George thank you for your comment.
I do one on one training in California if you’re interested
secretpdrpaintlessdentrepairtrainingonline.com/
So cool, a real art-form this type of repair.
Thank you