I bought a skidsteer! But it doesnt move...
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Hey guys! I recently picked up this old bobcat 825 with hydrostatic drive issues. The price was right, so i pulled the trigger. The machine had intermittent drive issues, occasionally it would not run, etc. Here are the first steps of me diagnosing and attempting to repair it. If I am able to fix it, itll be very helpful for the farm!
- ยานยนต์และพาหนะ
there a filter on a sping that scews off on them old bobcats make go back 4th
like in under cab, under seat when u lift up cab ,i had 743 would not go back and front was so i put that on and now works like new guy junked this bobcat was siting 8 yrs ,i got in runing took me 2 days but i drive it of his land he had covered with tarp 8yrs ,got it runing like new
Sounds like you got quite a deal there!
FYI if all the water is on the bottom the Oil will not look milky and longer. If you can heat the oil somehow the water will settle faster.
You are correct! I had driven it off the trailer though so i made the assumption that it was all mixed. I did not know the water would settle out with heat though
Don't worry buddy the oil filter is probably blocked. Also could be valve stuck. Are the levers moving the valve controls correctly Also might be chain drive gone on one side
The levers seem to work as designed, its currently able to run and drive now since i plugged that hole. It still has low charge pressure, but i think thats the filters. Im going to put some hours on it and then do new fluids and filters.
New fluids and filterd again*
hi there you did good , john
Thanks john!
Right off the problem is a Fram filter anywhere near a machine you own.
Gotta use what is available sometimes.
@@KindsKattleRanch tisk tisk smh....
After watching several videos of oil filters getting cut open for comparison of what their made of, WIX filters came out on top.
FRAM SUCKS! 👎
@@KindsKattleRanch True, but swap out that Fram ASAP.
Oh and water in the oil will cause cavitation
We thought it would be good to invest in a skid steer for a fmaily friends pole building business… it just cost too dang much to keep up with it. Every use something broke or went out or busted. We decided it was best to just rent one if we really needed it 😂
In some cases this is absolutely the right thing to do. Sometimes the overhead is not worth it.
Hey by chance, do you have measurements for the hydro dipstick?? My machine has never had one. And i need one. . Any help would be rad! 5oh9 for96one 8 16
I used to work on Perkins many years ago, the ones I remember were 4-108 and they are a bit hard to start. Indirect injected. Is that what you have?
I'm not sure what model it is, ill have to check. Any idea where the numbers would be on the block?
What did you find out about the elbows that had nothing on them. Were they relief fittings that would discharge oil to the sump when the reliefs open? Check your glow plugs. Ether start and glow plugs do not get along very well.
From my understanding, they are case drains off the relief valves, however they should have some form of a drain hose on them to prevent aeration.
I've got one of these. The Perkins is a reliable very fuel efficient engine. Not powerful. Terrible cold starters. They don't have glow plugs but a terrible manifold heater that rarely works. Just a whisper of Cosby sauce and they take right off. JUST A WHISPER.
I believe this one has had enough cosby sauce pumped in it to fire the titanic.
@@KindsKattleRanch 😂😂🤣🤣
there 2 filters under cab
Sounds like you got a great deal then! Nice!
Who standing wind camera on cold night breathing your fogging the camera when you exhale 😅😅😅😅
Trust me, if i could control it, it would be warmer!
SO WHAT HAPPENED TO YOUR CHEAP BOBCAT?
Currently it wont start! Haha. Waiting for a day i can get it pushed on the trailer and hauled to dads to work on it in the shop. I'll post the video when I do.
Hay bud, to much talk not enough wrenchen makes for boring content.
Thanks for the input! There seems ro be a fine line of what to film and what to cut. Im still learning where that line is. Thanks!
Dude, buy a owners manual to figure-out how to work on the BOBCAT Skidsteer.
Im using the manual in the video....i have a service manual, and a repair manual. What part are you referring to?