How to program Toyota key remote - FREE - No gadgets needed (Hidden features)
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- How to program Toyota Key FOB Remote for FREE under 1 minute - Very easy
#toyota #toyotachipkey #toyotatransponder #programtoyotakey #keyfob #cheapestcar #cheapcamry #toyotaremote #toyotakeyfob # toyotaremotefob #dealershipsecret
Follow me on Facebook :
/ thedocmackcarchannel
Instagram:
@thedocmackcarchannel
Instructions:
Please subscribe . It is completely FREE to subscribe.
Make sure all doors are shut and unlocked.
Insert the key into the ignition
Open the drivers door.
Within 5 seconds:
Insert the key and pull it out
Insert the key and pull it out
Within 40 seconds:
Close the divers door open the drivers door
Close the divers door open the drivers door
Insert the key into the ignition and pull it out.
Within 40 seconds :
Close the divers door open the drivers door
Close the divers door open the drivers door
Insert the key into the ignition, and do not remove it
Close the drivers door
Turn the ignition on
Turn the key off
Remove the key from the ignition (Door lock will cycle once to indicate you are in programming mode)
Within 40 seconds :
Press and hold the lock and unlock button simultaneously for 1.5 to 2 seconds.
Now press and hold the lock button for 1 to 2 seconds.
Door lock will cycle once to indicate that the programming has been successful .
If it is not successful , then it will cycle twice. - ยานยนต์และพาหนะ
Thank you. He said $80. This man saved me $280. The Toyota Dealer wanted $300 for one fob and programming. I bought two on eBay and programmed them myself with this video. Savings: $280!
Hi Francis, you are most welcome, and many thanks for the comments. Please consider Subscribing to my Channel if you haven't already. It is free to Subscribe and I post lots of how to DIY videos. Also consider hitting the thumbs up button on the video 😃
Wow, seriously, your videos enabled me to do responder and remote within 3-4 minutes after spending two hours on numerous instructions elsewhere… there’s so many variations on this but only yours worked!! 😍😍😍😍
You are most welcome.
You just saved me so much money! I can't believe that it worked! Thank you so much!
You are most welcome, please consider subscribing to my TH-cam Channel for free if you haven't already to show your support
Thank u it works with me in camry gcc qatar
thanks alot bro, that worked well for me. I have subscribed to your channel
You are most welcome. Thanks for the comment 👍 and thanks for Subscribing.
Very useful video. Thank you 🎉
You are most welcome, please consider subscribing to my TH-cam Channel for free if you haven't already .
Legend 🤘
Thank you, please consider subscribing to my TH-cam Channel for free if you haven't already to show your support . I have lots of car videos .
cool......you are thebest!
Thanks Jiang, consider Subscribing if you haven't already. It is free to Subscribe.
it worked for me man! thanks a zillion!
You are most welcome. Please consider subscribing to my TH-cam Channel for free if you haven't already subscribed. You can also donate to the channel of you would like via the thanks button.
For those asking if it will work on your car, why not try it? The OP may not know all these things. 🤦♂️
Amazing
Thanks for your comment. Please consider Subscribing to my TH-cam Channel if you haven't already. It is free to Subscribe.
It worked after three attempts or so on my 06 sienna! The first step of the doors unlocked and then leaving the key in, it's not clear if a key needs to be withdrawn before you open the door or not and then do the subsequent steps. I tried it a couple different ways and eventually it did work!
Thanks for the comment, it is time sensitive, so that is probably why you got in the 3rd go. Most people followed mine and it worked. Consider Subscribing if you like to see more car videos. 😀
👍👍👍👍👍
Amazing! If I program a new key fob(either success or failure), would it affect my other key which is working now?
Thank you, it will not affect current keys but will have only max of 5 programmable keys. Please consider subscribing to my TH-cam channel for free if you haven't already
I tried with a 09 Toyota Avalon but with a 07 Toyota Avalon key fob
How about info on how to program fob for 11 Camry with keyless remote (push button start/entry only)
It would be good , but I don't have a car to test it with.
will this work on a 2012 Yaris with power locks ?
Hi, it may work but I cannot say for sure as this was tried on a 2006 to 2011 Camry. You can always try it and if it does not work you can get Toyota to program it but at dealership cost of coding though .
Hi there, thanks for the video, will this work on a 08 highlander?
Hi, it possibly could. Does your remote look Similar?
Doesn't work unfortunately
Did you figure it out. I have 08 Highlander too
I bought an aftermarket 2012 Sequoia fob. Are you instructions the same for my fob?
Won't enter programming mode. Worth😊 a try
@David Kukoleck Hi there, you sequoia might be a bit different, also with after market keys it might not always work. I would recommend getting oem keys then programming it yourself.
Does a new key should be coded first, then programmed for remote ? Because I have key that is not coded yet, but I can't program the key for remote.
Remotes and keys are separate. If you have a fob you can program it using this method
I bought a new keyfob on ebay. Swapped the old key in. And tried all these methods. None of them work. I could not get the locks to do anything. Its for a 2011 Toyota Camry. Any ideas?
I would say make sure that the key part numbers are the same as described in the video . The aftermarket keys are touch and go. If you do it on a genuine key it should work. Mine is a 2011 Camry SE
How can I reprogram my push start botton in my 2009 Toyota voxy bus
Hi, sorry I have not tested it for that model.
Will this work with a US based 2011 highlander se? It’s saying must have dealer program but this looks like it will work
Hi Jsson, I would say yes, but I have never tried it on a highlander.
Will this work for 2008 Toyota Highlanders
Potentially yes, this was attempted on a 2006 to 2012 camry .
Is this works for 2008 Highlander?
One of my audience tried this on their same year Highlander and it worked , I cannot guarantee but you can try it. Also please Subscribe to my TH-cam Channel for free if you haven't already.
did you brought the key fob from amazon?
Hi, I bought it from Toyota. The part is not overly expensive, the programming is hence I did it myself.
Does this work for a Toyota Sienna 2008
Hi, yes this will work for a Toyota Sienna. Please remember to Subscribe to my channel. It is completely free to Subscribe. You will have a subscribe button down below, or in the last 20 seconds of this video you will see a circle Subscribe button within the video, just click on that to Subscribe :)
Would it work on a 2007 Toyota Camry? I tried it and it didn’t work. Maybe i did it wrong?
It should work for a 2007. It is time sensitive though.
Question does programing the key or the fob matter if the car does not have power windows
It might , what make model and year ?
@@DocMackGarage is between 2002 -2007 i drove the car a couple of times i actually never notice if it has power windows or not i was giving this car as a gift i just wanted to program the keyfob to open and lock the door with the controler i also wanted to program an actual key as Spare incase i lose the key the car is still in a familys member place i havent pick it up so i havent taken a good look at it the times i drove it before it was always dark at night most of the time
@riqhte That is a 5th Gen Camry. I tried this on 2011 model which is 6th Gen, I assume this will work. Please consider subscribing to my TH-cam Channel for free if you haven't already to show your support.
Will this work on a Toyota RAV4 2014?
2014 might br a slightly different FOB so can't guarantee sorry
Does it work on 2011 Highlander ???
Does your key fob look the same ?
Yes
@@Ttran1968 I would assume it would work. This had been tried on a 2011 Camry , but you will have to try it to find out, if it does not work then there will be paid alternatives.
Also consider Subscribing if you like car videos.
well, that doesnt work for a 3rd gen Highlander
Does it work on camry 2013 ?
Hi Majid, on a 2013 I would assume it would but the only way to find out is to try it. The one I did it on is a 2011 model.
Does this work on second gen Toyota Sequoia?
What year is your car ?
@@leesw2 I think it could work, but certain US models might not work .The only way to know is to try it I guess.
How to do it on a Toyota Prius 2007? I can't hold the lock button, and can't turn the key on ignition on, only start the car..??
Priest might be different sorry.
@@DocMackGarage do you know how to do it? Please the locksmith asking for 220 dollars for programming....
Did you need to wire anything ?
For the model I have no, I did not need to .
I have toyota corolla 2012. Will this work for my car?
Hi , the 1.8L 2012 to 2017 . Possibly not as it is a more advanced key . You can still try it though. Consider Subscribing if you haven't already
is it possible for the fob to become unprogrammed when the fob battery dies?
Hi, It won't happen . It is still programmed . Please consider subscribing to my TH-cam Channel for free if you haven't already to show your support 😊
@@DocMackGarage i replaced the batteries and it does not work. i need a new FOB. does this procedure work on 2011 sequoia? Subscribed!
@ryanr6656 Thank you. Does your FOB look the same , or is it the semi diamond type ?
@@DocMackGarage same as this
@ryanr6656 I would say it should work as transponder should be similar, however I have not tried in on a Sequoia before.
How do I do this if I don't have a key? I only have a Start button?
I don't have a process for that one sorry.
hi i like to program toyota tarago 2008
Around that year might work, but I cannot guarantee given I have not tried it on that model .
did not work on 2008 sequoia
Hmmm, your new key fob looks the same ? What is your part number ? Does it match mine ?
where to purchase the new remote?
I bought mine from the dealership bare and unprogrammed, then I programmed it myself
thank you
@@larrybui you are welcome .
Unfortunately, this didn't work on a 2011 Highlander.
You may need to buy software online and get the ob2 connector
It worked for me, but when I open the door at the end it stopped working :/
You can definitely try it again, no harm . Consider Subscribing to my TH-cam Channel for free if you haven't already. Remember this process is time sensitive.
Works on every Toyota?
Not every Toyota
@@DocMackGarageCamry? Aurion?
@Saintrap-hd2ne Camry 6th Gen , also will work on Aurion 1st Gen. Please consider subscribing to my TH-cam Channel for free if you haven't already.
@@DocMackGarage what will work on 2009 aurion, when i do this car locks and unlocks but fob doesn’t connect to car
This doesn’t work on my Toyota Tundra 2005 why not thank you
Hi, if your Tundra has the same type of Remote, then it should work. You can give it another go, it is time sensative, so you have to be quick, or else it may not work. Let me know how you go.
@@DocMackGarage I ok thank you
You are welcome. Please consider Subscribing to my TH-cam Channel if this video helps you. I have lots of videos which may be of help
$80 more like $400 if you take it to a dealer
Which is the reason for my video 😉
Yes but there don't last long but thanks for letting me know