ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Symptom: The remote control does not work with 2002-2006 Toyota Camry even after replacing the battery or Fuse.
Problem: Defective Door Control Receiver
Location: Inside the passenger-side C-Pillar.
Toyota Part
2002-06 Toyota Camry DCR Keyless Entry Door Control Receiver Module 89741-AA020
Available used at EBay for $40-$60
#Toyota #ToyotaCamry #ToyotaPowerLock
I had the same problem with a 2003 Toyota Camry. The fobs didn't work even with new batteries. Thank you so much for this video. I never would have tried to fix the problem without it. I purchased and installed a door control receiver module for $34 on Ebay. Now all the fobs are working again. Thanks so much.!
I owe you ALOT! My Fiancée has been going on for years about getting the key fob fixed but no one could program and had a answer, After watching this and putting the part in tonight I am pleased to say that she is very pleased and over happy and I have you to Thank for that. THANK YOU TONS!!!!
Nice
I have a 2005 Toyota Camry, and it does not have the screw to remove the panel on the rear pillar. I see no way to get it off without tearing it up and damaging it. Is the receiver even under that panel on this car? The car came with 2 fobs that don't work even with fresh batteries.
Your car don't even have a Reciver in it You can Install that by a mechanic
Thanks for uploading this. I couldn't even get the car in "programming" before. Saw this and I went to a junkyard to get the part, installed it and bam I was able to program the fob. Cheers.
After change new receiver it need to reprogramming or can use without reprogramming?
My wife's 2010 Camry (australia) recently the key fob stopped functioning, I replaced the battery, to no avail, I've checked the fuse under the dash, it was ok, so this video helped a lot to find where the receiver should be.
It made sense since i recently replaced the rear speakers and had that panel off, seeing the parts behind, I recall a box like that one. Thank you. Now i can find a replacement and save a lot on an auto electricians bill
Nice👌🏽
God bless you
WHat fuse needs to be checked?
How did you program the key?
Dude I am forever grateful for this video..I have been going thru this same situation for two years especially when it's hot outside. Appreciate you so much.
Great video, I am going to order the part and see if it works for me. Please keep making helpful videos like this!
I think she said it’s a 2012 I don’t know anything about the rest of it. Dennis is the one who knows that
Does this work with a 2005 Toyota highlander?
Very very helpful video. Thank you so much
Great but it would be nice if you told us how to program it.
The driver’s door open and unlocked.
Key out of the ignition.
1. Insert and remove the key from the ignition switch 2 times within 5 seconds.
NOTE: Steps 2 and 3 should be performed within 40 seconds.
2. Close and open driver’s door TWICE.
3. Insert the key into the ignition and remove it.
NOTE: Steps 4 - 6 should be performed within 40 seconds.
4. Close and open the driver’s door twice.
5. Insert the key into the ignition.
6. Close the door.
7. Turn the ignition switch from “Lock” to “On” and back to “Lock” at about 1 second
intervals to select the desired mode:
-1 time for ADD mode.
-2 times for REWRITE mode.
-3 times for CONFIRMATION mode.
-5 times for PROHIBITION mode.
8. Remove the key from the ignition.
9. To confirm your mode selection, the power locks will now cycle “lock” to “unlock” a
number of times corresponding to your key cycles in step 7.
NOTE: If Confirmation or Prohibition modes have been selected, opening the door will
complete the procedure.
10. For Add or Rewrite modes do the following within 40 seconds of Door
Lock confirmation:
A. Press both transmitter Lock and Unlock buttons simultaneously between 1 and
1.5 seconds and release.
B. Within 3 seconds of step A, press the transmitter Lock button for more than 1
second and release.
If the transmitter has been successfully programmed, the power locks will
cycle “lock” to “unlock” once at this time.
If there are problems with the transmitter or the procedure up to this point, the
locks will cycle twice. If this occurs, verify that you have received the correct
transmitter, and then repeat the above procedure.
C. If multiple remotes are to be reprogrammed, repeat steps A and B.
11. Open the driver’s door to conclude programming mode.
What if nothing happens. No locks cycle or any noise at all. Is it the door control receiver causing the problem.
Quesetion, Does replaceing this module remove the ability to start the car, or does this module only affect the key fob and keyless entry?
Only affects the keyless entry and trunk opening via key fob
@@Andrew-hh3ol got one from the junk yard and its been going good since, thanks for the reply
@@madlad_don2387 if it fails again I believe there’s a fuse on the circuit labeled 573 or whichever one is blown that supplies power to the board and can be jumped and Will usually fix these Toyota remote receivers
@@Andrew-hh3ol thanks for the info
Even though I checked my battery, and I was convinced it had to be something wrong with the receiver in the car, I decided to change the key battery again after watching this video, and to my amazement, the friggin thing started WORKING again!😮 Thank you for this video!
I checked the c pillar part and the wire is there. The previous owner probably bought the car with out a module receiver. planning on buying one, my question is what is the specific screw called
I have the same Camry with similar issues. Did you reprogram the existing key FOB using the add mode or the rewrite mode after installing the new door control module?
Good day sir,my Toyota matrix 2004 key fob refuse to pair with the vehicle receiver module. When I try programming, once the car gets to programmable mode,then I press the lock and unlock buttons, followed by the lock button, nothing happens. I got another replacement fob with the same part number,same thing happened. Please can you help me out?
Hello. Did you get a new receiver module?
My blinkers randomly flash as if I locked the doors while the cars off and already locked, every few minutes any idea??
Toyota Corolla 2004 model where is the DCR location can you tell?
Did you ever find out
How do you re program the key fob with the new module?
Hi how many alarm modules does the 2006 camry have in it?
After installing do you have to program anything?
aikron56.......i have a question on another vid where comments are turned off....... can I ask you about where you got the plastic spacer for the 1-1/4 bike hitch to 2" reciever?
Its a perfect idea and i cannot find them anywhere.
Hi! Does the 06 Camry have one module or does it have another in the dashboard?
Does this receiver need to be programmed???
Can you sell me this car? I like it.
My mechanic said my ECU was fried up and it would cost me $600 plus labor to fix it up. I took a look in the C pillar of my car as you did on this video, and surprise, there was no receiver in it. I just ordered one from eBay for 40 bucks.
Wow, my mechanic was seriously trying to rip me off!!
Can I install a viper alarm/ auto start on my 2002 Toyota sequoia sr5
Thanks for the valuable information.
I have tried in vain reprogramming it and it only works sometimes randomly and then it ultimately failed to work for 2 years since.
After your video I am going to opt for replacement unit.
But I am going to reprogram it one more time in hope it may work again then get that part.
Many thanks.
Thank you for posting this! We have not been able to use our remotes for years.
Thank you very match. You good.
Hello, and thank you for the video... I have a quick question ....did you have to match any serial numbers or model numbers from the original part or replacement ?? or can I get one from my local scrap yard, replace and reprogram. Thanks again!!
I only made sure I got the correct part number made by (or branded as) Toyota. No serial number necessary.
2002-06 Toyota Camry DCR Keyless Entry Door Control Receiver Module 89741-AA020
Thanks for watching.
How did you program the door remote
Is that basically the alarm system?
Hello sir , after replace new receiver control module need registration / programing first or not ?
You need to reprogram all the remotes
It is same solution for camry acv31 asian spec?
Great video, thank you very much
Wow. Thanks for this valuable information
does the same apply for 2006 Avalon? How do you complete the reprogramming once new module is installed?
Sorry I'm not sure about the Avalon but given Toyota's efficiency, I wouldn't be surprised if the Avalon has the same remote module as the camry. Pls check compatibility when buying. EBay is a a good resource.
This information is valuable god bless you and your family thanks
How can you program
Can use with camry 2007?
My car cant use remote when weather hot or parking with the sun
Thank you very much for your help. God bless you and your family!
Can you share link for manual reprogramming here... Thank you
Hi. I did a quick google search and found this one. Thanks and good luck
itstillruns.com/program-toyota-camry-remote-5755049.html
I was not able to leave a comment on the video for the Camry side view mirror video, so I came here to say thank you! As simple as it was, I wasted lots of time trying to install that glass, and I was not able to do it until I watched your video for the second time!
Thanks again! You are awesome!