THIS is WHY We Don't Re-Use OLD Framing Lumber.. Ep. 5
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Hey Gang. The framing stage is almost complete and it looks incredible! Lots of information in today's video. We love diving deep and answering questions that we all have when it comes to these things! Don't get us wrong, old lumber can be used for so many things! We check local recycling areas to see if they did anything with lumber (there was a place in southern California that sorted through and recycled old lumber) But we had no luck unfortunately. Thanks so much for watching!
studpack.com/
Contact: studpack225@gmail.com - แนวปฏิบัติและการใช้ชีวิต
This channel is what TH-cam was meant to be. Loving the content and craftsmanship. I wish them great success.
Yeah, so true. Love your comment. As people living in those stick houses are until first high wind, then you'd see. It's cheap and holds its own weight but that's it.
The tips you give when you run into challenges are greatly appreciated. Probably the best renovation channel on TH-cam.
No probably about it. These guys are legit. Do everything the right way. Explain problems as they come up.
Man, It is so refreshing to see a true professional at work and not a hack…..
It's nice you have to keep going to the store and show it. Adds an extra touch of reality to the show- most of us spend a lot of time going back for the odd bolt or board.
I'm in Minnesota and as a framer we glue floor sheeting, stair threads/risers, the bottom of every hanger, and lastly all interior/exterior bottom plates. A lot of people don't realize that the interior walls will squeak in time so we glue them down. Same thing with exterior walls. This also helps block the wind or draft's from entering the house in the winter. -30°/-50° isn't a good time when your house is drafty, lol. I've never heard of or seen anyone glue LVL's together or stud packs. Thanks for the video, guys. 👍🇺🇸😊
I'm in Canada and I think northern climates like ours call for glue in situations where the south might not need them. But amen to stopping the squeak.
@@larryroyovitz7829 That is true. I live in the Pacific Northwest. Just two hours outside of Vancouver, B.C. We get heavy winds and snow load here.
@@kalijasin Nice. I'm in Manitoba. Not so bad for wind, but bad for low temps and heavy snow loads.
Glue the "bottom of every hanger"? Never heard of that.
Thank you for taking the time to give a clear reasoned explanation of the process. Jordan has a great teacher...so do we.
What I like about your show is that you do projects like I would do. They don't always go perfect like they do on other DYI progams, and you show us how to make corrections to the problems that may come up.
Excellent content. I’m a handyman myself for more than 15 yrs
Is always appreciated to see real pros do the right thing every time. Not cutting corners but going beyond expectations 👍
Thank you and keep it up!
I really enjoy the amount of pride and excitement you have when you sincerely want the customer to be happy with your craftsmanship. For the most part, us homeowners don't mind paying for this type of attention to detail.
I'am a remodeling contractor in South Carolina and its good to see you teaching your son the trades the right way and the safe way. Good Content.
These guys are great. You can see the pride they take in their work and the satisfaction they get from their customers.
I agree with not reusing old lumber for framing, there’s definitely some other uses for it in less critical applications especially since the price of lumber is through the roof now.
I reused a bunch of lumber. It was the old size slightly bigger and twice as heavy. I probably would use it for a supporting wall or anything structural important, but it holds screws just fine and I do think the wallboard will fall off. This saved me money and getting rid of the old wood. Also it was straight. BTW. I do not think there is a straight piece of lumber in my local box store.
Watching your vids the last week or so,
Nothing like watching craftsmen that know their stuff and enjoy their work.
Respect from Dublin, Ireland.
It's great that you stop and explain what is going on. It's also awesome that you show the headaches and problems you overcome. Thanks!
Man daddy stud pack has so much knowledge on this sort stuff. I'm glad You guys started making this video. One of my favorite channels on you tube.
Much appreciated Scott 👍💪
That's the beauty of wood you can bend it and make it fit and nail it. Love that little air Hammer you have. My dad always said that with the right tools you can move the world
I like how you’re able to combine older fastening methods with new ones.
There are many seasoned framers who won’t touch structural screws, the amount of time they can save makes it a no brainer.
very quickly one of my favorite home reno channels.
I know I like to keep old framing lumber around for non-critical uses, such as building garage workbenches. I definitely don't want to reuse old framing lumber for new framing for the reasons you showed!
Stud Pack episode with my morning coffee....Gonna be a good day!....
Add a quick smoke and I'm right there with ya.
@@godsbong smoking bad. coffee good
I really enjoy watching your videos for so many reasons. The top and most important reason is how awesome your relationship is with your son/father. As a father of one fabulous young man I applaud you in how well you both get along and work together. Keep up the great work.
I Never used a palm nailer like that,looks pretty slick. Awesome job as always 👏👍
Everything about your content is top notch. I know you have heard this before also but the family relationship you have is very special. It's a privilege to watch.
Love that you go through the specifics even down to the importance of following the nailing schedules as required by the manufacturer. Great job man.
I do this all day and then come home and watch it on youtube. Probably means you guys are doing a great job. Duck the haters boys.
Haters? I'm all for concrete structures and brick. Or frame houses, where real sized material is used, and when it isnt a sponge (look at how many growth rings there is in those 4x4's), only way any fastener will really hold to it is a metal plate and bolt through it. Otherwise you can use a styrofoam, as long as "'screw goes 3 inches deep", thats ok according to the spec, right? And you can get dense styro too, so where is the problem?
Great to see your thinking process and great explanations. Thanks, a plumber from Scotland, UK.
I decided to go through the whole playlist to get the full story about this reno/remodel ... and I must say, it's one of the VERY FEW comprehensive channels where I could leave a comment every 5 minutes, asking questions etc. Really good content. I'll get to this level soon. Watch me.
Good video. I enjoyed watching you guys solve problems on the fly!
A friend of mine asked a carpenter who was working on his mom’s house to take out the wall between his kitchen on the backside of the house and living room in the front of the house. The carpenter said yeah I can do it no problem. I had been to his house many times and said please don’t just take the wall down, that it will need a beam and asked him to consult with a structural engineer. He said the carpenter had told him no beam was needed. I told him, yes it can be done but it will need a beam because the wall is load bearing. He consulted a structural engineer and the engineer confirmed it was load bearing and needed a beam. I had him get the engineer to go ahead and do plans for the beam etc., and the plans should be be approved in 2-3 weeks and he is having it done in the spring next year. With a different carpenter.
Better to confirm things with a structural engineer as you guys obviously do!
Not even a mistake, just the kind of crap that can happen in construction. This is channel is seriously fantastic, you guys are awesome thank you for the clear and honest approach you have to your publishing.
Y’all remind me of building with my father , cherish your time together.
I really like to see you do not leave any thing out, You guys are perfectionists i love that. I started watching the bathroom remodel now i am hooked. Be safe. Ray
It really shows your experience with the setting of that beam. Thanks for sharing. Charles
Love when i watch these vids and things being done right i work for a custom builder and have seen some really crappy work good to see good work done ill watch more of you
This channel reminds me of me and my dad when we remodeled my grandfathers house. We took down some walls and made it a open concepts design for the kitchen and living room. Love these videos!
Great job guys! I really like how you talk through your options and how you overcome the challenges that are inevitable in a remodel. I’ve been a carpenter for 25 years now and I’m learning some great tips from you. Keep up the great work!!
These guys are awesome, I like seeing how they go through a problem and eventually solve it but they break down why the things they originally were thinking wouldnt work and eventually get to the solution and why.
Top notch quality with these two!!
Your engineers comments on gluing are spot on. Gluing in the field is a highly inconsistent process with highly variable results. You can’t make any engineering strength assumptions about the results of a field glued joint.
[You can’t make any engineering strength assumptions about the results of a field glued joint.]
I beg to differ, albeit factors have to be taken into consideration. Consider that in some instances, screwing, unless done with a torque break, can actually reduce the strength of the glue bond. I build structures held together with only glue and friction fit. Mechanical fasteners were eliminated in the prototype stage in my most successful designs.
"In the field" if there's doubt as to the integrity of the glue/adhesive bond, you screw and glue. Adhesives will only add strength in critical situations. Airplanes, for instance, are bonded together.
@@stephensaines7100 you’re comparing highly engineered and thoroughly tested situations (airplanes and such) to some guy squirting an unknown quantity of glue on a piece of wood with unknown moisture content, that might be clamped, or might not, or might be put under load before curing. I bet there’s a multi page procedure involved in the field joints you’re referencing. That’s very different. I built the airplanes you’re talking about and in my industry we don’t even allow friction to enter the calculations because the surface conditions are variable.
@@motor2of7 friction calculations is a major part of aircraft design.
@@asherdie it’s not allowed in spacecraft design.
@@motor2of7 yes it is.
Just a jab, but go Tigers, Auburn Tigers. Since the 2x6’s are only supporting the Sheetrock at such a small span on the cathedral ceiling side, that split wood fix is the way I would have went too. It’s going to look great once the drywall is finished and painted.
Thx Fish 🐠 👍. SEC rules 🏈 ⚾️ 💪
I feel like every new video is the best video you ever made. Love this channel and by far my favorite! So exciting fellas!
The solution for those joists with the 4x4s is perfect.
Whoever built my house in the 60's did the "half on / half off" with my main floor joists at the sill plate. Now I'm starting to see cracked joists exactly where you'd expect.
What a mess.
Good video. I learned a lot.
I'm really liking your vids, I'll be recommending them to a few friends. I like that you do everything by the code while at the same time explaining times when there are exceptions or alternatives that do not compromise on safety or quality.
Damn, that's some craftsmanship.
"Belt and suspenders" made me chuckle. In the UK we say "belt and braces". Keep up the good work fellas.
I made that mistake once in the UK and mentioned that I wear suspenders only on special occasions like weddings. The lady in our presence blushed a little.
@@OnlyOneFever A statement like that would easily pass as British humour so you had nothing to worry about.
I loved the end of this series and now I've wondered my way back and I love the beginning too!
Another great video guys, father and son team make instructional video's with great content. You both be safe out there, remain blessed and keep the video's coming!!!!!!!!!!!!!!!!!!!
Whoever complains about that 2x6 repair with glue doesn't understand that wood glue forms a stronger bond than the wood itself. In other words, the repair is better than the original. To fail, it would have to break again in another spot. This is true for compression tension, and shearing forces. In short, people who have a problem with your repair don't know what the heck they're talking about. If that's their argument, by logic we should tear down all houses when the wood is over "x" years old -- a pretty ridiculous argument if you ask me.
I just built a house and I'm shocked as what passed as "code" and got rubber stamped with approval of engineers. If I could post pictures here, you would not believe it. There has to be a river of dirty money flowing through our building commission. You are doing your customers a huge favor by taking the time to do it right, by the book, even if people who wrote the book or merely skimmed it don't know what they're talking about. There's "by the book" and then there's common sense. And unfortunately a lot of people are lacking in that area today -- except for a select few, like you.
Much appreciated BYUgrad 👍👊
I really like and appreciate the effort you make to check different thoughts from your followers but also check with your engineer. It says alot about you as a person and contractor. You understand you can be fallible just likt the rest if us. Thank you 😊
Thanks! Please keep sharing!
On the topic of gluing: I am a designer of prefab wall panels and prefab trusses, in the North East US. As your engineer said, the only time they require us to glue anything is on truss repairs (in that case both gussets and scabs are glued). In all my years i have never seen glue as a requirement for beams or stud packs.
Your level of skill and knowledge ... wouldn't dare criticize if I thought I saw an error. Yeah, you would say please criticize. What a pro.
You guys’ quality of work is the gold standard as far as I am concerned. I have been in construction for forty years both commercial and residential and you should see some of the hack work out there. You provide concise explanation of both the problems and solutions. You understand the concept of loads which many people don’t. As far as some of the comments on here, funny how people who have never built anything are suddenly structural engineers and expert repairmen. Keep up the excellent work both in front and behind the camera as well. That is also noticed. 👍🏼
I really enjoy your presentation style, it's fun to watch, easy to understand and inspiring. Thank you
that glue generally cures harder than the wood grain. it's probably stronger now than when it was new.
I work with my son a lot and love how you and your son get along best utube channel I’ve found keep up the awesome content
You guys have made all my do it yourself jobs so easy. Thx
👍💪🇺🇸
Hint for people using the Simpson Strong ties in awkward situations. Simpson makes a screw which is spec'd to replace the nails. This can come in very handy.
@Philip B Good question. I won't go back to nails, just because I had an instance where i needed to take a hangar out and it was not fun with those nails, but I think the nails are cheaper.
And a little bit adds up when you're putting in hundreds.
Wow. I am learning so much. You are excellent at explaining the process and steps.
Cool thx Bianca 👍💪
A good example of adhesive use in residential is between the subflooring and the floor joists to prevent squeaking floors.
You can tell a real professional by how they navigate road blocks. Mr. Stud Pack, it's clear to me that you aren't easily frazzled. Problems that would put a DIY'er in the fetal position, hardly seem to faze you. Cool, calm, and collected; the kind of professional I want on my team.
Just found your channel a few days ago and subbed yesterday. Been loving these contractual home jobs. Not that I would know really how to do it myself, but it's nice to know what to expect and how it should be done. Thanks for the great content.
Once again, you've made my morning a good one. Love you guys
I really really really need a Stud Pack hat!!!!! Love everything you guys are doing and I am impressed with how well you work together.
Great framing and design sense.
Details, Details... Smoothie King.. Looks interesting, wish they would be up north here in MN. Good job guys!!
Love Love the details with joist hangers and measuring roof load support boards.. We all look forward to the next video! Keep up the good work!!
I like how you used those hangers I've only use that kind one time on a home project to attach a set of stairs to a deck. It worked really well.
THANK YOU LEARNED A LOT ABOUT ANGLES AND LOADS AND THE IMPORTANT.
I'm not a carpenter so I would never do what you are doing but some of the issues you run into I would absolutely stress out about but you are like ahh piece of cake to solve. Love the videos.
Dude I gotta admit you are VERY GOOD at what you do.
We did exactly the same to our house with a nearly identical floor plan! Love it being as open as it is now....we used 3" steel square tubing with plates welded to each end to support the beam.
That’s going nowhere 👍
Kudos to Jordan. You’re are an excellent videographer. I enjoy watching and learning from your TH-cam channel.
That’s very good quality work. Focused on every minimum deatails lot to learn from. Thanks stud pack
Gotcha Thank you for the explanation Paul, Makes sense. Keep up the great work guys.
You got it thx Damien 👍💪
super great job on all this .... all the energy you put in this channel is really coming thru. also GREAT sound work.
during both our renovations I provided a large igloo cooler filled w/ ice, power-ade drinks and bottled water - the mason's workers were especially appreciative for a cool drink in late August
sirs; i absolutely love these instructional videos and must say, i know of no other video that does this. thank yall for these and for keeping yalls minds on safety.................g
u guys r awesone love that its a family i loved working with my dad glad I found ur channel be safe guys
Thx wolfie 👍
At 12;32 when you began explaining the issue with the tops of the 9' ceiling joists extending above the top of the LVL beam, my immediate thought was put a 4x4 on top of the LVL. Lo and behold!
Another Awesome video! The problem solving is what so many channels are missing.
As I am watching this, I can literally smell old lumber. I am fully immersed
Mr Poul you’re definitely a Master!
Very good work and professional 👍🏼🤛🏼
Looks great, very rugged indeed. I'm up in Vermont where we accumulate good snow loads and the only time I bother gluing beams together is when they're for a floor system and that's only to stop any possible speaking from them sliding past each other under a live load. Also Paul have you ever thought about picking up a Stanley Fubar? They work great for twisting crooked lumber where you need it. Not to mention the 1000 and 1 other uses. For as cheap as they are might be something to look into. I carry one on the left side of my pouches in a hammer holster all the time. Keep up the great work you guys 😁👍
Lmfaooooo I lost it when you played neck
Edit: I would block it. Not because of normal loafs or anything, but if a future contractor walks on it. Probably not necessary bc glue is strong, but when I do work I like to exceed expectations so I don't mind doing that kind of stuff
My house was built with 90% reused lumber, had no problems, 20 years later still no probloms, just need to inspect and choose what used wood is best for what location.
The increased labor costs of working with recycled materials make it forbiddingly expensive.
@@zacharybob4336 If you paying labor maybe, me a family assembly line clean savaged lumber, I make a killing on old barn siding, my house is studded all in salvaged hardwood, way better quality than the lumber used nowadays, definitely was worth the time.
@@zacharybob4336 Not for long at the rate lumber prices are going up!
I torn down a house about 50 year ago and used material to build a barn It still stand today nothing wrong it
If time is not the priority then it can make sense to use recycled wood. The time it takes to sort out and select the good lumber is acceptable if the project is your own. It kind of becomes a labor of love, like when you find a beautiful old door that needs lots of work to get back into good shape. It will take hours and hours but, once done, it becomes a gorgeous showpiece. I'd guess that when you do remodeling work for others for a living, time is pretty important.
I used to do layout for a lot of modular building units. Engineers specified a glue pattern and fastener patern/layout on most beams in those buildings. We also weren't allowed to have those kinds of gaps in between plys in lvl build up beams, we had to glue up, sandwich, tack it and hammer flat before it was nailed off or tech screwed.
I enjoy your real world content. In this video i see lots of excess material and wasted space to form a Mc Mansion.
Really interesting looking at the guts of that structure.
Stud Pack and morning coffee what can be better than that. Thanks for showing, WHY We Don't Re-Use OLD Framing Lumber.... I was curious about that and now know it has served its purpose and RIP OLD Framing lumber. 👍
I love that air-powered hammer tool you used to drive those nails into the hangers......that really made quick work out of it.
Trade name is "palm nailer" if you want to buy one.
Austin Hastings Thanks for the info
I don't think I've seen people address comments to the depth you guys do, actually asking the engineer was a super nice touch.
Interested more in what you meant about crowning, I know all wood has a bow, but I wasn't sure which way you wanted the bow to be.
Anyways love the videos, makes it a good morning.
Glue it and screw it. Great video guys. You are lucky to work with your dad. And dad is lucky too.
Yep we call it bridging across the rafters it holds everything together, and it certainly makes sense to keep all the beams on the same level, I used to drive every one to despair by eyeing the timber to get the straightest and best without knots in it
You, Sir. do a fantastic job and I like your approach and work ethic! Well done!!!
Thx 👍💪
You are the best at explaining what your doing and why your doing it. Great job. I’m totally jealous of your relationship with your son👍 I wish I was that tight with my dad.
Another great video. I recently did a vaulted ceiling and could not find the angled hangers (big box stores 🙄). Sure would have made life easier.
I've learned a lot of tips from You Two thank You!
Very nicely done!!
Now that's attention to details. Great info...............
I really like the way you explained everything, keep doing what you are doing😀
If you are a framing contractor get the Simpson Strong Tie catalog, the info in that is amazing, has the design criteria and everything they make in it. Im a structural draftsman and use it all the time with the engineers i work for.
the video looks super clear. awesome job team.