Well I mean, on average brand spankin’ new mud rubber goes for about 400 and up for a higher rated tire. So yeah it’s actually easier for some of us to just buy them one at a time. I pay $380 for my Nitto Trail Grapplers at my local tire shop, been going there for years so they always hook me up
Go Fxck Thyself I lucked out. The 31x10.50 extreme country tired I got on my obs F150 cost me 350 for the set. Got them on a 4WP sale with a mail in rebate.
When insurance company’s unsure things like this you bring it to a guy and the figure out how much it would cost to rebuild it. I had to do it with my truck. It’s just like going to get a exotic car insured. They don’t just insure it you half to take it and get it looked at.
shrey raj yeah but it’ll have all the emissions shit on it making it as unreliable as the rest of them, lol. Got a 6.7 Cummins and actually bought a 100k extended warranty just for that shit. Soon as it hits that....deleted
Everyone has the same amount of time in a day , 24 hours. All the way from the homeless to the president. I don't like when people say someone has so much time ,as if they don't.
totally agree.. i am almost finished building my 2001 f250... started as a 2wd truck and now is 4x4 with coil spring suspension.. about to go through the engine and tighten some things up with that then its on to body work.. I'm pulling the cab and bed off to paint inside and out so while thats off I'm pulling the engine transmission and all of the trimmings to strip clean and repaint the frame axles and suspension.. lots to work to get it to where its at and lots more to come but it will be a damn fine work truck when its gets done..
Dude that thing is badass! Thats the one thing I really wish my 7.3 had. After leasing a 2018 F150 and loving having all the features on the interior, it really makes my 7.3 feel like a dinosaur haha. I've thought about doing an interior swap for a while but would have no idea where to even start, so definitely going to have to have you build my interior for me some day!
I was thinking about doing lots of stuff to my 99 7.3 superduty to keep the old reliable motor and improve the body and interior. I found a couple forum posts on putting the 7.3 in a few year newer truck. I'm kinda thinking that might be fun and cost less than a fummins conversion/donor truck, or buying overprice new or used parts here in Canada for my old truck. Plus save time swapping tons of parts compared to a motor trans and the wiring/gauges to make it work . There was a 6.0 locally for $5000 that just had a safety inspection and the motor dumped 4000 kilometers after,the body/ interior was like new.
When changing out your interior was there much of a change as far as electrical connections? In other words, did everything hook up easily from the 05 to the newer dash kit? I want to do the same for 06 f350 dually
To say I'm jealous is an understatement, your truck is badass. I love the 7.3, I love the 10-16 interior so I couldn't imagine a more perfect combination.
Freaking amazing man, congrats on the build. You really nailed it! How did you swap the steering wheel? I want to end up swapping the steering wheel on my 03' 7.3, but im not seeing ANY prints on any platform! I'm also thinking of going from a column shifter to a center console shifter. Putting an entire 08' king ranch center console w/ the shifter and sticking w/ that theme through out the truck. Help meeee bro! Great build though, A+!
What a hell of a preference to spend time like that on a ride. Real nice, i got an 86 f350 crewcab dually, it would be the best of both worlds (old school exterior with new school interior) to have that setup. Two thumbs up man !
yeah i have FatMat everywhere possible, then wedge foam panels put in all the pillars and dead areas around the cab, then stinger roadkill foam pads up the fire wall down to the back seats
That fatmat works super good. I had done my trunk (not visible) of one of my bagged cars where I had my tank, compressor, and valves and you couldn’t hardly hear them conpressors. And if people know about viair 480s they know they are loud.
Did the dash and everything just bolt straight on or did you have to make it fit. I’m a TH-camr as well and I have a 03 f250 7.3 I’m fixing up. I want to put the new look inside
Awsome job Zach. Say could you put how much this ran in the description above. It would be nice to do that to my 01 Crew Cab as well. Thanks for sharing. Best Wishes & Blessings. Keith Noneya
I’m working on a build trying to copy you as much as I can I don’t think you have a video on the updated steering wheel and column do you? Would be super helpful
This video legit motivates me to get an older f250. I found one nearby for $13000, it's a 2006 XLT. Has 142,000 miles. It's a local truck. Think it's worth the investment. I never owned a truck but want a diesel.
Nice work! If I could build one it would be the F350 with Cummings engine and an Allison transmission! That’s a truck there. See ya in the oil fields bro
Awesome dude! You just effected my life...im gonna do that too and my wife is gonna bitch about the money and the time it takes...Thank goodness there's Bud Light
Damn kid has no clue what he is saying....it tows a million pounds.... Im pretty sure the sticker said a million nine hundred thousand pounds! Does this dash set up work for 2008 f250 gasser???? Great work and video man!!
I've got an 03 F250 King Ranch Crew Cab, I'm looking to swap to a newer interior. How difficult was that dash swap? Also, is that the same stereo/speakers from the 6.7 you pulled the dash from? Your swap is beautiful and exactly what I've been looking for. Were the door panels direct bolt in, and just rewire or splice the wiring? So that's a killer swap dude. Thumbs up.
" keeping it simple ya know" completely changed the interior lol clean job tho bro
YOUDONTKNOWJACK lol I read this as soon as he said it
@@cadenn.2074 LMAO, I did as well.
“Hell yeah”
1000th like❤️
Man!! That’s an awesome rig. Love the conversion!! 7.🌲 is the way to go!
You got one sick truck brother.
7.3's sound soo good nice ass truck
Super cool, if you did all that work you are skilled!
Man you did an awesome job.👍
That thing is badass!
Nice truck!
Amazing !
Whered you find the dash swap I have a 03 suburban and I the 2015 dash
wow! I'm impressed.
You were talking about tires being expensive then showed an entire interior upgrade lol
thats where my budget went..... but i know right
Well I mean, on average brand spankin’ new mud rubber goes for about 400 and up for a higher rated tire. So yeah it’s actually easier for some of us to just buy them one at a time. I pay $380 for my Nitto Trail Grapplers at my local tire shop, been going there for years so they always hook me up
Meanwhile its $240 for 12" all season tires on a 1990 Ford festiva. That's for 4 tires 😂
@@zacharymcfarlin1270 Its like 1k for me and my C4 vette tires, I feel the pain in expensive tires
Go Fxck Thyself I lucked out. The 31x10.50 extreme country tired I got on my obs F150 cost me 350 for the set. Got them on a 4WP sale with a mail in rebate.
Imagine if this man got in a wreck... insurance company wouldn’t know what to do
He would just rebuild it into a 2019 ford
Insurance Company: “We’ll go ahead and pay you for the value of the car....”
**Uses Kelly Blue Book**
“Ok looks like you’ll be getting $1300”
With that gril nd that hight im sure he ginna crush them nd have a scratch on his
When insurance company’s unsure things like this you bring it to a guy and the figure out how much it would cost to rebuild it. I had to do it with my truck. It’s just like going to get a exotic car insured. They don’t just insure it you half to take it and get it looked at.
If the accident is bad enough the interior is damaged then they woild probably total it and give him the book value of a 2001 super duty.
Trucks sick, singing voice needs work
Little Rascal agreed definitely on those lower notes .
Eey relax Bruno mars
Ummmm.... This truck is EPIC! My favorite engine with my favorite interior! -Darrick
A trusty ol 7.3 with a modern interior, that's badass! Can't wait to see more of this build
@@vetsroofinginc1395 wish granted
Richard Chmielinski it's coming in 2020 !!!
shrey raj yeah but it’ll have all the emissions shit on it making it as unreliable as the rest of them, lol. Got a 6.7 Cummins and actually bought a 100k extended warranty just for that shit. Soon as it hits that....deleted
its coming back but as a gas engine
Why? The 7.3 was a turd lol and got terrible fuel mileage. A deleted and tuned 6.7 is superior in every way possible.
" so what year is your truck?"
Uuuhhhhhhhh
2001-19🤷🏻♂️
Johnny Cash had a song like that
@@MrSENTINELOFFREEDOM one piece at a time 🔥🔥😎
@@devinharrison9382 yep
It’s 2019 it could identify as 2016 if it wants to 😂
Idk why people are hating and this guy , he has a sweet setup , Congrats brother enjoy your ride!!
Air_Tech_09 This man has the best of both worlds a old school strong body truck with a modern twist with new interior . I love it .
This guy must have a lot of time on his hands.
Michael Denave too much
And money, that swap aint cheap
He does these conversions for a living I believe
He's a single and self-motivated guy in the military. Ease up folks.
Everyone has the same amount of time in a day , 24 hours. All the way from the homeless to the president. I don't like when people say someone has so much time ,as if they don't.
100.3 The Bull...?! You're from Houston man that's badass.
Truck is amazing btw.. don't know how you pulled all that off.
Where else would they play Clay Walker... Texas all the way 🤘🤘
He has Nevada plates though
When I saw the bull on the radio I was looking for this comment 😂😂. I was gonna say the same thing
@@Mag375 haha same, Texas pride!!
Haha noticed that too
Ha ha ha You had me sold on the term "stabbin cabin" LMAO
Shit had me crying😭🤣🤣
holy s!@#. I will pay you to do mine. damn thats good.
jasonman1515 for real where can I have this done
The best trucks are built, not bought. Awesome job man!
totally agree.. i am almost finished building my 2001 f250... started as a 2wd truck and now is 4x4 with coil spring suspension.. about to go through the engine and tighten some things up with that then its on to body work.. I'm pulling the cab and bed off to paint inside and out so while thats off I'm pulling the engine transmission and all of the trimmings to strip clean and repaint the frame axles and suspension.. lots to work to get it to where its at and lots more to come but it will be a damn fine work truck when its gets done..
Max Trehus thanks bro i did it all my self took me like 3 days to do
Badass job bro! That steering column has me tripping how you pulled it off so clean!!!
I can't even imagine how much of a pain in the ass this must have been to do lmao.
Dude that thing is badass! Thats the one thing I really wish my 7.3 had. After leasing a 2018 F150 and loving having all the features on the interior, it really makes my 7.3 feel like a dinosaur haha. I've thought about doing an interior swap for a while but would have no idea where to even start, so definitely going to have to have you build my interior for me some day!
I was thinking about doing lots of stuff to my 99 7.3 superduty to keep the old reliable motor and improve the body and interior. I found a couple forum posts on putting the 7.3 in a few year newer truck. I'm kinda thinking that might be fun and cost less than a fummins conversion/donor truck, or buying overprice new or used parts here in Canada for my old truck. Plus save time swapping tons of parts compared to a motor trans and the wiring/gauges to make it work . There was a 6.0 locally for $5000 that just had a safety inspection and the motor dumped 4000 kilometers after,the body/ interior was like new.
just saw your video of your 7.3 going 0-60
Man that’s a clean job! With my 05 was done like that!!! Keep up the great work and keep us informed!
When changing out your interior was there much of a change as far as electrical connections? In other words, did everything hook up easily from the 05 to the newer dash kit? I want to do the same for 06 f350 dually
You definly have some time, money and effort into the interior. Turned out nice bud.
Ill have to say I was skeptical....over all i think u did a pretty slick job...holla
To say I'm jealous is an understatement, your truck is badass. I love the 7.3, I love the 10-16 interior so I couldn't imagine a more perfect combination.
Awesome truck thank you for your service
That's amazing. Cool to see someone have such pride in something like that. I'm sure it takes a lot of time and effort
“the stabbin cabin” 😎😎
This is like if a truck had plastic surgery. Great job.
Deffinatly want a parts list of everything to do a full conversion like this.
Freaking amazing man, congrats on the build. You really nailed it! How did you swap the steering wheel? I want to end up swapping the steering wheel on my 03' 7.3, but im not seeing ANY prints on any platform! I'm also thinking of going from a column shifter to a center console shifter. Putting an entire 08' king ranch center console w/ the shifter and sticking w/ that theme through out the truck. Help meeee bro! Great build though, A+!
Ignacio Ruelas the console shifter is only on the 150’s. That transmission wouldnt bolt to a 7.3
Would have it been easier just to engine swap?
i think thats kinda cheating... then i'd have a 6.7 body and Vin... then it wouldnt be a 2001 anymore
Emissions exempt on 7.3. With a 6.7 vin and engine would then be required to pass testing
@@trevormangus7832 Maybe in California, I live is Illinois, you can run whatever you want
Nobody would go from a 7.3 powesrstroke to a 6.7 powerstroke
I would go from a 7.3 powerstroke to a 6.7 Cummins
I’m not trash talking but why spend all that money on an only truck ? If you like the 7.3 switch it out with the 6.7 in a newer truck?
Bro,this build is out of sight. The fact that you did it all yourself makes it even more amazing.
Best conversion I've ever seen good work Buddy.
Now that's a dream build right there.
Yeah so 2001 7.3 powerstroke engines got plently of life left 400k miles looking for 45K or trade in cope wintergreen and garth brooks tickets
What a hell of a preference to spend time like that on a ride. Real nice, i got an 86 f350 crewcab dually, it would be the best of both worlds (old school exterior with new school interior) to have that setup. Two thumbs up man !
This is what happens when an e-4 says he's at ACAP for 6 months straight 😂😂
Good Ole Country boy!! Thats Merica right there! Good job youngster!
I wanna be your friend sir.
Avoid these colors please your truck is so good looking green,red,blue,camo....maybe black and grey camo wouldn’t be too bad
Rolando Bernal oh yeah yeah
Did you do some extra sound deadening to get the inside that quiet? I'd like to make mine a little quieter inside
yeah i have FatMat everywhere possible, then wedge foam panels put in all the pillars and dead areas around the cab, then stinger roadkill foam pads up the fire wall down to the back seats
@@zacharymcfarlin1270 Really appreciate it...I'm gonna do that.
That fatmat works super good. I had done my trunk (not visible) of one of my bagged cars where I had my tank, compressor, and valves and you couldn’t hardly hear them conpressors. And if people know about viair 480s they know they are loud.
Damn this shit is fucking sickkkkkkk
How hard was it to do this kind of install and coast for the full conversation
im like 10k into it on mine, very very time consuming
Did the dash and everything just bolt straight on or did you have to make it fit. I’m a TH-camr as well and I have a 03 f250 7.3 I’m fixing up. I want to put the new look inside
“So, Hell yeah!” 😂😂
Lol
Awsome job Zach. Say could you put how much this ran in the description above. It would be nice to do that to my 01 Crew Cab as well. Thanks for sharing. Best Wishes & Blessings. Keith Noneya
Advantages of owning a big lifted truck.
You cannot be totaled in a car crash.
Fooos Until he gets hit by a semi
I’m not a truck guy whatsoever but I see you. That’s commitment
I Just Finished Putting In My Brand New 6.8 V-10 Motor XLT into My 1999 F-250 Super Duty Super Cab.
This man needs to be fords new head interior designer 😂 awesome job man!
That is very impressive man. The amount of work you put into that is crazy. I've got a 96 7.3 myself. Very cool truck brother!
Oh yeah yeah
You dont belong here
01silver auto i slammed your momma oh yeah yeah
Oh yeah yeah
Oh yeah yeah
Where are you located
I’m working on a build trying to copy you as much as I can I don’t think you have a video on the updated steering wheel and column do you? Would be super helpful
yeah theres videos on it
Super sweet build man! Gonna look even better with the the correct cluster in there! Got any more plans for this beast??
This truck is AMAZING! It’s every Country man’s dream truck 🔥
Your truck is sick💯🔥
I hope you can keep posting I want to see more upgrades and how you do them
I can't even imagine doing a job like that I hate just changing the radio
Dash from a 2016.....hmmmm
I like that !!!! How much was it !?
Gona do mimes like this
Sounded like the Ghostly howl of the Refurbished, C 5 Super Galaxy flying over! Bad ass Truck dude.
HAHAHAHA “Stabbin Cabin”. That’s a good one!!!
Well DONE. 'MERICAN PRIDE. I'm doing this to my Excursion. 6.0 bulletproofed.
This video legit motivates me to get an older f250. I found one nearby for $13000, it's a 2006 XLT. Has 142,000 miles. It's a local truck. Think it's worth the investment. I never owned a truck but want a diesel.
Nice work! If I could build one it would be the F350 with Cummings engine and an Allison transmission! That’s a truck there. See ya in the oil fields bro
This has to be the sexiest vehicle I’ve ever seen
H E L L Y E A H
this is bad asssss. imo i would rather drive it without a bed cap but keep ur style. Love your truck!
That’s dope
Cost and where did you find most of the interior?
Thanks
Sick Truck Bro! Just got my Chevy 15’ High Country Diesel and loving it! Dope man!
Awesome dude! You just effected my life...im gonna do that too and my wife is gonna bitch about the money and the time it takes...Thank goodness there's Bud Light
Badass bro! The perfect example of built not bought. Really surprised all the 6.7 parts fit that well. Great job
Damn kid has no clue what he is saying....it tows a million pounds....
Im pretty sure the sticker said a million nine hundred thousand pounds!
Does this dash set up work for 2008 f250 gasser????
Great work and video man!!
Congrats Beautiful Truck I Have 2003 F350 7.3 L. Starting To Fix Up The Look
well done man , i just got a 2000 7.3 superduty and want to change the grey interior to. looks great man
How did you hook up the rear AC? I want to do a 6.7 console swap on my 6.4 but i want the AC vents to work.
Bro I just wannna know how much , how long , and just HOWWW YOU DID THAT SO DAMN GOOD !???!!
Should’ve just bought a 6.7 but realistically who’s got 6.7 money right
Damn dude. That’s awesome. I just bought a 6.7 today. Love it!!!
Did everything bolt right up like the door panels ? Or did you have to make modifications?
NICE! How did you get the door panels to fit correctly? Are the mounting holes the same?
This is like a iPhone, in the exterior looks old but in the interior have a lot of new features
Nice 👌 stabbin cabbin
I hate Ford, it's the SAME body for 20 years??!! the 15 panels fit a 01 door??? F Ford for making this so expensive.
I’m a chevy guy and even I gave a thumbs up for this one, good job updating the interior.
Still the absolute G of Ford conversions. The amount of free info he gives away is insane
I've got an 03 F250 King Ranch Crew Cab, I'm looking to swap to a newer interior. How difficult was that dash swap? Also, is that the same stereo/speakers from the 6.7 you pulled the dash from? Your swap is beautiful and exactly what I've been looking for. Were the door panels direct bolt in, and just rewire or splice the wiring? So that's a killer swap dude. Thumbs up.
Looks so great.
I wish I could do that on my Excursion especially the one i have already got 2016 nose swab.
Awsome dash/interior conversion! Who did the conversion for you? Please let me know! Thanks!
Nice truck! I have a 2002 F350 Diesel and I would love to upgrade my truck just like yours. Thanks for sharing
Keep simple " has fucken solar panels on the roof 😂👍🏻that's right deadly work rig
Dude I want this truck! What would you charge to do this I have a 2000 7.3 I've been looking to do this please hmu
What did all this cost you? I know you did the labor portion but the parts how much did all the interior parts cost?
Nice👍 yet I'm toying with ideas, to take my interior into 2025, from 03🤔😁