I could speak, drink beers with that Man for many days. I built from the scrap frame my 2012 F450 with 12ft bed and keep upgrading it. I installed Cummins 6.7 in my truck. My truck is only one in Los Angeles 😅
You definitely know what you're doing..Great job it likes clean and it's just nice to see someone take pride and do such clean work...I have an 04 f250 6.0 and IAM definitely reaching out to you for a quote...I want same thing done ..
Awesome swap as always. Something I noticed about the cluster helper, when the key is in there is a pause between chimes, that’s meant for if the headlights were left on, and if you turn on the headlights without the key in, you get the key in chime. Kinda backwards but still cool none the less
I see what your saying, but if I'm not mistaken, for a specific body style (Either 11-12 or 13-16) the chime actually was that slow. That might be what your confusing with another years speed of the chime
Man thanks for this video. I’m in Texas, about to start on my 05 F350. I love the Platinum interior. My goal is to have no lights on as it concerns to the dash. Why didn’t you address that issue with seatbelt? Thanks for the great detail and walk around.
I can’t wait to get my Excursion interior swapped. I want to do it a bit different: captains chair swap front and second row. Heated and cooled both rows and food and tumble third row (quick disconnect I’m thinking). I’ve already converted from leaf spring front to coil (05-07 suspension swap). I want to do a front nose swap too. Everything to 11-16. I’m open to platinum, king ranch or lariat interior. I wouldn’t even mind if factory leather was trashed and needed to be reskinned in Katzkin. Love the factory look with all the upgrades. Looking good.
@@rayhendricks7379 not much actually. You need the front suspension setup from an 05 and up super duty. 3 existing holes on the frame line up with the brackets so you only need to drill out the remaining two holes (which will be aligned already due to the other three. Then axle and suspension parts, etc. it’s practically a bolt up situation, only cutting is for the wheel well liners if you don’t want to sprint for new ones. If you go with the bigger (newer) brakes, make sure you have wheels that clear them. I put 2017 platinum wheels and tires on from someone who did a lift immediately after they purchased the truck.
PLEASE PLEASE PLEASE Tell me where did u buy those mirrors and switches. I'm trying to find fully powered, power extendable mirrors. I assume that i need that type of switch. Please advise me. Also where r u located approximately
Hey Zack, please put me on your reach out list to get some work done…have a 06 lariat crew cab that I would love to do the middle seat/consol upgrade and full front dash swap, possibly some other upgrades similar to how you had your original truck with solar/lithiums and inverter. Thanks!
Dude!! Where are you located? Do you have a business location? When I get my X, after bulletproofing the engine, I want to redo the entire front interior!!
I have an 03 excursion with knob ac controls. I have an 08 xlt interior for the swap. Is there a radio surround that will allow me to use the knob ac controls, or an 08 setup that can be adapted?
I’ve been following your channel through a couple builds now and you do incredible work dude. Do those extendable power mirrors only come off a 2016 platinum? I’m looking for the turn signal power extendable mirrors for my 05 excursion. Do you have an email or phone number I can ask you some questions about different parts and build idea? I’m from Fort Worth
I have a 2001 f350 7.3 I saw your video that said how much?, how much? All I need is a xlt interior swap I really want the electric locks and windows and auto headlights and black interior. How do I get your info and send you my truck? I have a 8k budget. Can you help me out? I’m in Texas
Last I heard he is in hiding from scamming people. Don't know for sure but different Facebook groups and local telegrams groups. People are looking for him
With this dash swap, instead of during the ipad install, would it be possible to do the Tesla style radio? They make the Tesla style for the 250 anyhow and it is a F250 dash @zachary mcfarlin
Hi Zachary, do you know anyone else near or in the state of Colorado that is familiar with Excursion swaps? Rather bring it to you but the drive would be brutal. Thanks for any info you can provide!
@@zacharymcfarlin1270 what other tablet will work? I'm HEARING the Samsung A 8.0 will work...thanks! I wanna use the Samsung but I need to know WHY it will NOT work if it won't,what's different on the Samsung that's on the iPad that will or won't let it work.👍
@@zacharymcfarlin1270hey brother, have you tried putting 22-24 f350 seats in a 99-03 f250/350? I have a 02 f350 lariat crew cab and want to put in 2022 f350 cc seats/console. Not talking about the electronics in it and I know they wouldn’t bolt right up, but was wondering if it’s even possible to mod them in. Thanks for any help man.
EDIT: For those wondering the same, the Cluster/Collum helper makes the "Tap to pass" signal thing work as factory! (OLD COMMENT): Please tell me how you got the "Tap Too Pass" function to work?! I don't see it listed as a feature of the "column/cluster helper"?.... Is it something you did yourself? Thank you!
hey bud. I'm interested in getting in contact with you about getting a harness made up for my 2004 f350 6.0l, I'm putting a 08 dash and column in the truck. Comment back Herr the best way I can get ahold of you since TH-cam doesn't have messenger. lol thanks
Has anyone seen this guy. Been reading that he has scammed a lot of people. Bad business I've heard, doesn't respond, doesn't do the work, doesn't refund and moves around the country so he is hard to find. Beware
You know you're good at what you do when you put it on TH-cam for the world to see. Top notch installer.
Where you located want to do the same for my 2002 f250
THIS GUY WAS THE 1ST TO RIG THE CLUSTER ..HE IS A GENIUS
Second to none man you definitely take pride in your work. Someday I’d like to do an interior swap
ever since i saw your first videos years ago ive dreamt of bringing my 7.3 to you. absolutely amazing work.
Keep dreaming
I could speak, drink beers with that Man for many days. I built from the scrap frame my 2012 F450 with 12ft bed and keep upgrading it. I installed Cummins 6.7 in my truck. My truck is only one in Los Angeles 😅
Best interior swap I’ve ever seen
Nice work bro. I love seeing the old Excursions get the makeover
I just became the owner of a '00 7.3l Ex. This is an amzing conversion. Inspiring for sure! I am sure my wife would love such a nice interior lol.
The hours and hours and hours here. Props man. Super clean
Yeah definitely going to drive from Maryland to his location it’s so worth the drive 💯
Awesome seeing a fellow B.C Canada truck getting worked on. You do awesome work and I bet soon you will be booked a year in advance.
Very professional work , im impressed , you really know what your doing !
You definitely know what you're doing..Great job it likes clean and it's just nice to see someone take pride and do such clean work...I have an 04 f250 6.0 and IAM definitely reaching out to you for a quote...I want same thing done ..
Super clean truck my dude. Mad props ! 👏👏
That double screen set up is sick!!
Awesome swap as always. Something I noticed about the cluster helper, when the key is in there is a pause between chimes, that’s meant for if the headlights were left on, and if you turn on the headlights without the key in, you get the key in chime. Kinda backwards but still cool none the less
I see what your saying, but if I'm not mistaken, for a specific body style (Either 11-12 or 13-16) the chime actually was that slow. That might be what your confusing with another years speed of the chime
Man thanks for this video. I’m in Texas, about to start on my 05 F350. I love the Platinum interior. My goal is to have no lights on as it concerns to the dash. Why didn’t you address that issue with seatbelt? Thanks for the great detail and walk around.
Dude you’re an effing beast!!! Good work man!
damn dude, this is some awesome work good job👍🏻
You did amazing on this bro
This is awesome 👌 I'm not a Ford person but I like it
I can’t wait to get my Excursion interior swapped. I want to do it a bit different: captains chair swap front and second row. Heated and cooled both rows and food and tumble third row (quick disconnect I’m thinking). I’ve already converted from leaf spring front to coil (05-07 suspension swap). I want to do a front nose swap too. Everything to 11-16. I’m open to platinum, king ranch or lariat interior. I wouldn’t even mind if factory leather was trashed and needed to be reskinned in Katzkin. Love the factory look with all the upgrades. Looking good.
What does it take to swap to the 05 suspension I've been wanting to do it but can't find a good writeup
@@rayhendricks7379 not much actually. You need the front suspension setup from an 05 and up super duty. 3 existing holes on the frame line up with the brackets so you only need to drill out the remaining two holes (which will be aligned already due to the other three. Then axle and suspension parts, etc. it’s practically a bolt up situation, only cutting is for the wheel well liners if you don’t want to sprint for new ones. If you go with the bigger (newer) brakes, make sure you have wheels that clear them. I put 2017 platinum wheels and tires on from someone who did a lift immediately after they purchased the truck.
@Brett Simpson that's good to know im going to locate me a setof axles and such hopefully I can get a whole front suspension cut off another truck
So a dream truck. Hilarious how a company could make something like this but won’t. I guess they wouldn’t sell enough
Well done. Fantastic.
Serious Skills Brother!
Sweet sounding rig
This is a badass interior 😎👍
That’s not bad at all. I’ll hit u up once my money’s right
Sweet ride. Did the side mirrors fit without any need for adjustment? I've got an 04 EB gasser
Old skool truck whit the new line performand looks
PLEASE PLEASE PLEASE Tell me where did u buy those mirrors and switches. I'm trying to find fully powered, power extendable mirrors. I assume that i need that type of switch. Please advise me. Also where r u located approximately
Please, let me know. I need to know
Please let me know
When are you gonna get ol beatsy up and running again
Hey Zack, please put me on your reach out list to get some work done…have a 06 lariat crew cab that I would love to do the middle seat/consol upgrade and full front dash swap, possibly some other upgrades similar to how you had your original truck with solar/lithiums and inverter. Thanks!
Great work. How do I reach you to schedule my 05 Excursion in for the same conversion?
Dude!! Where are you located? Do you have a business location? When I get my X, after bulletproofing the engine, I want to redo the entire front interior!!
How do I contact you about doing work on my truck?
Question ! ?
Is it the same dash in the f250-f550 ? I have a 2000 excursion but I found a dash and steering wheel from a f450
When you put the door mirrors on did you have to change any wiring?
Would you do this job for someone else n if so how much would you charge, and how long would it takes to get this job done?
Nevermind my last message i found the video lmao
Where do you recommend an interior swap for an 05 in Florida?
You still doing these swaps? Where are you based out of?
Did you use a dash wire kit?
Where you located? I need help with my EXCURSION
Just curious how much an in depth interior swap like this would cost on a crew cab 2007 f350 . I would want the same interior
Wish I knew what happened to Zach I miss his builds
Why can’t the factory trailer brake be utilized?
Amazing 🤩
How do I get in touch with you if I want a dash upgrade like this in my excursion….
I have an 03 excursion with knob ac controls. I have an 08 xlt interior for the swap. Is there a radio surround that will allow me to use the knob ac controls, or an 08 setup that can be adapted?
Beautiful work man!!
Is this possible with a obs reg cab?
I’ve been following your channel through a couple builds now and you do incredible work dude. Do those extendable power mirrors only come off a 2016 platinum? I’m looking for the turn signal power
extendable mirrors for my 05 excursion. Do you have an email or phone number I can ask you some questions about different parts and build idea? I’m from Fort Worth
Bare bones 02 to 2016 with nothing provided platnium interior crewcab ? Ball park?
$30k
How much for the set up? I want to upgrade my 04 Powerstroke
How much did he spend on the interior
how much does this swap cost including labor and parts?
How do we bring our vehciles to you !
Is he still doing these?
I need to know how to do this in mine lol
I have a 2001 f350 7.3 I saw your video that said how much?, how much? All I need is a xlt interior swap I really want the electric locks and windows and auto headlights and black interior. How do I get your info and send you my truck? I have a 8k budget. Can you help me out? I’m in Texas
When you swapped the column how did you account for the chipped key?
2003 Excursion would like to update dash and door panels. Are you still in business?
Last I heard he is in hiding from scamming people. Don't know for sure but different Facebook groups and local telegrams groups. People are looking for him
How much does this cost
the stock dash should have oil pressure too
With this dash swap, instead of during the ipad install, would it be possible to do the Tesla style radio? They make the Tesla style for the 250 anyhow and it is a F250 dash @zachary mcfarlin
Where are you located? I'd be interested in getting this done
I know you can't give me a exact price on a job. But what's your guesstimate for a full interior swap on a 01 7.3 f250 crew cab?
$8k
I need your help. 7.3 build. Located in Alabama
Hi Zachary, do you know anyone else near or in the state of Colorado that is familiar with Excursion swaps? Rather bring it to you but the drive would be brutal. Thanks for any info you can provide!
I don’t know anyone in the country that does what i do
@@zacharymcfarlin1270 what other tablet will work? I'm HEARING the Samsung A 8.0 will work...thanks! I wanna use the Samsung but I need to know WHY it will NOT work if it won't,what's different on the Samsung that's on the iPad that will or won't let it work.👍
@@zacharymcfarlin1270hey brother, have you tried putting 22-24 f350 seats in a 99-03 f250/350? I have a 02 f350 lariat crew cab and want to put in 2022 f350 cc seats/console. Not talking about the electronics in it and I know they wouldn’t bolt right up, but was wondering if it’s even possible to mod them in. Thanks for any help man.
Can you make a video on making the air compressor?
What do you charge for a early 04 super duty full interior swap to the 2013?
What's the cost on this?
EDIT: For those wondering the same, the Cluster/Collum helper makes the "Tap to pass" signal thing work as factory!
(OLD COMMENT): Please tell me how you got the "Tap Too Pass" function to work?! I don't see it listed as a feature of the "column/cluster helper"?.... Is it something you did yourself? Thank you!
Am looking for someone to do a dash swap on my 04 Excursion. Where are you located?
At 13:08 what new door seals is he talking about? What year do they come out of? I have a 2002 excursion that needs new door seals.
Get 2 driver door seals and 2 passanger door seals for 08+ superduty
How much to do mine
I’d love to know how I can contact you. I Watched several vids, and I Looked at the $ total. If you want to do another, please lmk
god i wish i had tge cash for you to do both my trucks
We're you located?
I just need my accelerator pedal bypass lion ran
hey bud. I'm interested in getting in contact with you about getting a harness made up for my 2004 f350 6.0l, I'm putting a 08 dash and column in the truck. Comment back Herr the best way I can get ahold of you since TH-cam doesn't have messenger. lol thanks
Factor in the exchange. That’s about 50 grand Canadian.
I need work done
7:44 lmao
Has anyone seen this guy. Been reading that he has scammed a lot of people. Bad business I've heard, doesn't respond, doesn't do the work, doesn't refund and moves around the country so he is hard to find. Beware
Bad to the bone!!!
Hey you wanna know something cool? My name is Zachary archer mcfarlin
How much would it cost to do a swap like this?
What is your contact info
Where are you located?