Thanks! I have the FCB1010 (and Reaper) myself but can't get it to make it change presets. I set up and saved 5 presets like in the video. Nothing happens/changes in NAM when I hit button 1 to 5. I can, however, get the expression pedals to work like how you explained in the video. It's just the preset changes that don't do anything on my computer. I did check if button 1 to 5 send pc messages and they do.
Hello @jescowhite6047, thank you for reaching out to us for assistance. The easiest thing to do is to reset the controller to factory default. Here are the steps: • Turn the controller off • Hold pedals 1 and 6 down and turn back on • Continue holding until the countdown finishes If you have a configuration you want to save before you reset the controller you can save the sysex with the editor. The above steps are based on the assumption that you have the stock chip and you are using midi cables to a midi input device. If you are using an aftermarket chip your PC messages may be offset by 1. If you are using a USB to midi cable the only cable known to work consistently with the FCB1010 is the Roland USB to midi cable. If you need any further assistance please feel free to reach out to us as we are happy to help. We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released. 🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1 Thanks, Guitar School Live
@@guitarschoollive Just reset the FCB1010 to factory default. It does select presets now but not like in the video. I'm using the 5-din midi cable from FCB to interface. Stock chip. The FCB does send out PC1, PC2, PC3 etc. on the corresponding footpedals. For some reason PC1 (footpedal 1) selects preset 2, PC2 selects preset 3 and so on. How is this method suppose to work? Should PC1 select the first preset you made in Reaper, as in top of the preset list, and PC2 selects the preset 2nd in the presetlist in Reaper?
![What is MIDI? An Introduction For Guitarists | Too Afraid To Ask [Meloaudio MIDI Commander]](http://i.ytimg.com/vi/iBj_onHWGu8/mqdefault.jpg)
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
![“อาร์ต พศุตม์” เกือบเอี่ยวทุกคดีดัง เอ๊ะไว้ก่อน ไม่มีอะไรได้มาง่ายๆ | แฉ 16 ต.ค. 67 [2/3] | GMM25](http://i.ytimg.com/vi/0Gx-0-kUBv8/mqdefault.jpg)
do you know why when i change somthing it does not work i have a bunch of presets but non of them work only the base clean interface sound
Thanks! I have the FCB1010 (and Reaper) myself but can't get it to make it change presets. I set up and saved 5 presets like in the video. Nothing happens/changes in NAM when I hit button 1 to 5. I can, however, get the expression pedals to work like how you explained in the video. It's just the preset changes that don't do anything on my computer. I did check if button 1 to 5 send pc messages and they do.
Hello @jescowhite6047, thank you for reaching out to us for assistance. The easiest thing to do is to reset the controller to factory default.
Here are the steps:
• Turn the controller off
• Hold pedals 1 and 6 down and turn back on
• Continue holding until the countdown finishes
If you have a configuration you want to save before you reset the controller you can save the sysex with the editor.
The above steps are based on the assumption that you have the stock chip and you are using midi cables to a midi input device. If you are using an aftermarket chip your PC messages may be offset by 1. If you are using a USB to midi cable the only cable known to work consistently with the FCB1010 is the Roland USB to midi cable.
If you need any further assistance please feel free to reach out to us as we are happy to help.
We have many videos scheduled that may be of interest to you. Be sure to subscribe so you will be notified when new content is released.
🔔Subscribe: www.youtube.com/@guitarschoollive?sub_confirmation=1
Thanks,
Guitar School Live
@@guitarschoollive Just reset the FCB1010 to factory default. It does select presets now but not like in the video. I'm using the 5-din midi cable from FCB to interface. Stock chip. The FCB does send out PC1, PC2, PC3 etc. on the corresponding footpedals. For some reason PC1 (footpedal 1) selects preset 2, PC2 selects preset 3 and so on. How is this method suppose to work? Should PC1 select the first preset you made in Reaper, as in top of the preset list, and PC2 selects the preset 2nd in the presetlist in Reaper?