Powder Coating Tips and Techniques using GX8500

One of the most important factors of powder coating is knowing you have trust worthy equipment; which includes Paint booths, guns and equipment. Second, is your techniques that you use to powder coat that will provide you with high quality output. This video tackles how you coat Faraday Cage areas and your hand movements.
We are coating using the Parker Ionics GX8500 series, which features Super Pulse Power Technology. Interested in this amazing unit? Be sure to visit www.parkerionics.com to learn more and request a quote by building your own package.
For more information please visit. www.parkerionics.com
FOLLOW US ON:
/ parkerionics
/ parkerionics
/ parkerionics
/ parker-ionics

[@marinmarinov6922]

Thanks for all the information provided I'm automotive paint sprayer, but interested in powder coating and that gave me a very good introduction.

[@Clifford270]

Excellent instructions. Thank you

[@nickpatrick7021]

Thank you for this run-down. I'm getting into manufacturing recruiting and I've got about six different manufacturing positions that I'm going to have to talk about about often and intelligently with clients and candidates - including powder coating.

[@eckoscode]

Stfu we powder coat parts that size using 1 gun each hand in a matter of seconds , I came here for the settings to make myself faster . Quality before quantity we make both .

[@heidikeranova3251]

You are great Teacher

[@whitespeed100]

nice info ! thanks ...

[@josellano82]

John,
Great video and of course great equipment. What would a good air flow in a booth?
Thanks

[@Herthan]

2:45 The corners where the sheet metal is broke at a 90 both have Faraday spots. Would have liked to see that covered more than the long corners. Not being cynical, just honest. I usually have to "shove" the powder in a quick motion while releasing the trigger to try to basically throw it into the spots without a charge.

[@parkerionics2054]

Thank you for the suggestion, We will work on more content and hopefully powder coat more/ different Faraday cage areas.

[@jordonconway7037]

I've noticed with the harder to reach places like tight corners and angles, if you spray slowly in a circular motion around the part from all angles, top bottom left right up down, the powder will stick from the back as you spray around the part

[@simonac688.]

Great tutorial Sir: question : can you use outside if no wind ? 👍

[@woodswoods4921]

I don't think so just for environmental protection purpose in anywhere! Just a simple spray booth~~~

[@johnbracamontes4257]

What were the settings on the unit?

[@parkerionics2054]

Hello John, The settings was on Super Pulse Power mode in (F) mode which tackles Faraday Cage Areas. Check out this video below for more information on the different settings. Hope this help!
th-cam.com/video/vXV7gLWGWEo/w-d-xo.html