ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Plastic Carburetor, Repair It For FREE. Craftsman Push Lawn Mower with Briggs and Stratton Engine
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2024
- Easy Step by Step DIY video with simple detail to repair your Plastic Carburetor For FREE. Craftsman Push Lawn Mower with Briggs and Stratton Engine No Start. We also cover checking fire and what to look for when the coil isn't firing. Always check the choke on the plastic carburetors to make sure it is closed when engine is cold.
The plastic carbs that have a primer ball on the air cleaner operate a little different. If it doesn't push fuel from the bowl into the throat of the carburetor it is probably due to a warped air cleaner base not sealing to the carburetor face. This style primer usually has a hole in the center because it just pushes air into the carb bowl forcing fuel up though the main jet tube into the throat of the carb.
Another quick way to check for fire and compression at the same time is to spray some brake cleaner or carb cleaner into the throat of the carb and try to start. If it runs and dies it is a carburetor or fuel issue even possibly water in the fuel.
Check out our Store
my-store-cf5bc...
#briggsandstratton
#raleyssmallengines
#lawnmower
Edited by YouCut:youcutapp.page...
Check out our Store my-store-cf5bc2.creator-spring.com
Raley I have a mower with the needle valve is plastic the rubber part on that needle fell off and landed on grass today I have a spare needle that is the metal one with the little rubber end to it will that needle work in place of the plastic needle ?
THIS WAS THE BEST VIDEO FOR THIS PROBLEM ON TH-cam!!!
Wow, Thank you 😊
My 2 year old Toro self-propelled mower kept stalling. I replaced air filter, gas cap (no vapor lock), cleaned carb just like you did, cleaned gas tank, replaced gas and spark plug ( it was fouled black sooty). Carb was clean, no dirt no clog.
It still stalled just as bad. Then I tightened the self-propell cable. Now it runs like a demon! No stalling, no carbon fouling. Starts right up.
All because of that cable being a bit slack.
Thank you! I followed all your steps and got the mower running again. You saved me a grip of cash for service repair.
That is great!! I'm so glad our video helped you. Thanks for commenting my friend, you made our day!
Thanks for the video T-bone!! Easy to follow directions and made my chore a lot easier. I was able to live up to my prediction of getting this done a lot quicker, impressing my wife. You the man!!!
Awesome, you're welcome 😊
Good video like that extra screen on small things being worked on 😊
Good tip about the choke lever hanging up against the metal bracket. I have come across that problem many times especially with Husqvarna mowers. Good video. Thanks.
You are the man! Wifey killing me over two weeks to mow the lawn. After following your detailed directions and with tlc and patience I just mowed the lawn. Thank you. Does this mean wifey will chill out now? Only until she finds another chore for me in the near future. Lol. Gracias amigo.
🤣 🤣 🤣 Glad we helped you out my friend. I learned many years ago the super secret to a successful marriage.. All you need to know is just two words.... "Yes Dear"
Watched a video before yours. Let me tell you, your explanation is light years ahead of the other guy I watched. Going to do this tomorrow. Wish me luck y’all!
Thank you Jeremy. I'm sure you will get it fixed.
Fixed it earlier. One pull!
One of the best DIY videos I’ve ever seen on TH-cam. Worked exactly the way you showed it. Thank you thank you!
You're welcome, glad it was helpful
Another great video. The new camera is crystal clear and the audio is perfect. Keep up with the great info. Take care.
Wow, thank you 😊
Great video. Camera worked great. Wish more folks used them.
Love Mr TBone, he really simplfy things. A fool need not error after viewing his videos. Thanks a lot Mr TBone!
I just got a free m220 from a coworker. Going to follow your steps & hopefully get it running again. Great video!
I'm pleased to say that after following your instructions & getting a new spark plug, it started up on the first pull. Thank you again for the video! Have a great day.
Thanks
all I needed to know was how to get it apart without breaking something I didn't know it was a bunch of O-rings but thank you thank you thank you. thanks especially for getting straight to the point.
One of the fastest and most proficient carburetor cleaners I have seen yet. It's a good thing.He explains the important points and slows down with close up shots to illustrate them. This good old boy is a real professional, Great job. Although I didn't see him check the oil! 😁👍👍👍
My mower started right up after watching this video, thanks!
I like this guy. First time digging into a plastic carb so I thought I'd look for tips online. Totally confident now. Thanks.
Great video. Voice volume was perfect.
Thank you
I like the plastic carbs. I've never had one that i couldn't clean. Nice video T-Bone! 👍🎥🇺🇸
Heck yeah. Thank you
Me to and easy to R&R it plus cleaning fix’s the problem
Only wish they had a fuel filter
Thank you so much for this video! I've never worked on a lawn mower a day in my life! I found that there was debris and water in the gas causing my mower not to start. You're a blessing!
love your teaching with that southern accent thx for sharing your knowledge. I will fallow you from now on.
Welcome aboard!
great job sir, i have been helping monroe at his shop and been working on plastic carbs myself. thanks for another video . have a great week end .
Thank you. We appreciate you watching and commenting my friend. Tell them we said hello, they are Great people. They know who we are.
I hear a lot of bad on these carbs , I find them easy to clean and very forgiving . no rust or corrosion . simple to install and easy to disassemble .
I want to thank you for your videos, I've learned a lot about small engines watching you, I can build and work on cars just never messed with mowers. Keep up the awesome work and keep those videos coming.👍🏻👍🏻🤙🏻🤙🏻
Excellent video, you're even getting the PIP in it! 😀👍
Thank you Steve. I had to do something because of my crappy camera work with that new camera. 😆 Glad ya liked it brother
I've been watching your videos for so long that it popped in my tiny brain. Do what Steve does 🤣 thanks brother
Love you Steve you are the man
Mine was a different model carb but basically the same. Ty sir. Neighbors lawnmower wouldn't stay running. I knew it was a fuel issue. Took carb off , dismantled it and cleaned as you stated. Reassembled and whaullah. Ty again
Thank you Steven for watching and commenting my friend. Glad our video helped you.
Good video bro - very helpful
Congrats from Aotearoa New Zealand 🇳🇿
Thank you 😊 Hello Phill in New Zealand!!
Thanks for that tip at the end it’s what actually made my mower work the kill switch was stuck I bent the thing up and it started first shot other then I have to stick a flat head to shut it off but not a big deal better than taking the carb apart ten diff times for nothing you got my grass cut today Ty very much !!!
I got a Walmart return one time in a lot of push mowers , it was a new mower and cleaned the plastic carb a couple of times . It had a miss that just couldn't get out , ordered a new cheap Carb from Amazon and installed it - it fixed the miss . I sold as an almost new push mower , so didn't mind putting a new carb on it . I've worked on a lot of these plastic carb's and 99% time just dirty .
Thank you T-Bone, saved a trip to the small engine repairman!
Awesome!!!!
I fix mowers for neighbours. I haven't had to dismantle a plastic carb yet, but now I am ready when it finally happens. Thanks, and cheers from Canada.
Heck yeah you got it.
This is the best video I have found. I am not a mechanic but I watched this and followed step by step and it worked. Saved myself a little money. Thank you so much. William in Texarkana, Arkansas
I'm glad it helped you William, thanks for watching and commenting my friend
Thanks for the detailed video. Mower is like new again!
Great video ! Ty it was so easy because of you ! “One Pull” all done
Thank you 😊. You did it my friend!! Great job and thanks for your kind words.
Thank you knindly for sharing your knowledge.
Awesome professional work!
You are welcome my friend. Thanks for watching and commenting
Extremely helpful! I’m going to go fix my craftsman M220 right now!
Awesome, I know you can fix it my friend
I have been working on my mower ALL day. You video is by far the best. I am going to try again tomorrow. A guy at O'REILLY said maybe my float is bad but this mower has identical guts to mine so I have a little renewed hope. Thank you.
I have to update my comment. My mower works! First pull!! YOU ARE MY HERO❤!!!
Awesome!!
i have seen guys pop the check valve ball out too because gunk can get stuck between the tube and the ball....especially since that gas was full of crud...great video
Can you please explain the purpose of and how the check valve ball operates. I have this exact mower, cleaned the carb but couldn’t figure out what those silver ball were for.
Thanks
HEY T-BONE I TRULY APPRECIATE THIS VIDEO. I HAVE LEARNED MUCH FROM THIS. THANKS A LOT.
iv got the same mower and thought the plasic carb needed changing going out there now to clean it ,appreciate the video
❕❕Thank You T-Bone❕❕
After sitting all winter, I tried to start my lawn mower. It caught on fire!
This video was exactly what I needed to fix it. Thanx again!.
Great job. Got to love it when a plan comes together
Heck yeah thank you 😊
Well done very clear very understanding and very informative
Thank you
Thanks you just showed me something that I didn't know on them carbs. I know what the problem is with mine. I didn't know the jets came apart. Mine runs good till it needs more gas. I bet them small holes are stopped up. I enjoy watching your videos.
Thank you
thank you so much!!! Off to my garage to see if this is why my mower wont start!! Excellent vid SIr!
Thank you!!
I enjoy your videos, even though I don't have the type's of equipment you work on,. I just enjoy watching thanks 👍
Thank you, glad you like them. What types of equipment do you have?
Yes! Great video. Easy to follow step by step instructions helped me get my mower running again. Thank you!
You're welcome my friend. Glad it was helpful
the screen in screen detail is great!
Glad ya liked it brother. Thanks so much
Thanks this video got my lawn mower running after a few years of sitting
Thanks for the excellent video. Luv ya T-Bone !!
Nice job! Just did the same thing for my mower a few days ago.
great video great teacher I like the way you explained it!!
Thank you 😊
Thanks for the tutorial!
Great video. Did everything you said and started up first pull. I did have a hard time getting the gas tank off, that’s all.
Your cam works very good. Like the split screen shots.
Thank you
excellent video, extremely informative and covered ALL the extras...
Thank you
Great video. Enjoyed the new camera view. Your approach is methodical and goal directed. Mechanical ingenuity at its best. Enjoyed complete video. I always learn something new everytime I see you perform miracles. Thankyou Sir.
Nice job. Definitely knows what ur doing.
Thanks Mr TBone
Very nice💥
Thanks for the video, great information! That old double bone GM spark plug socket for the 3000 series V6 cars - I've got one knocking around somewhere in the toolbox too.
You're welcome. 😆 I bought them from Snap-on in the early 1980s when I was a technician at a GM dealership. I have them in 13/16 and 5/8. Gotta love em
Thanks for your video
Very well explained. I picked up an almost new Toro lawnmower that would not start. It starts now.
jus showing how you took those linkages off was sure sign to me that y'all got the right camera for the operation. U get a big atta boy for that alone! And that zoom detail of where you're at is priceless as well . Now tell us what kind of a camera are U using to film this ? cause its a good one! Maranatha ! The Lord is Coming !
Thank you. I'm using a cell phone. We recently started using a gopro for a couple shots, but still getting use to it.
The new camera did really well, puts us right in the action. 👍
Nice video T-Bone 🙂
Thank you brother
Straight and to the point. I like it
Bravo! Thanks!
the new camera and camera work are excellent!
Thank you
I like the new camera, sort of shaky cam, but I get used to it. I think a slight tilt down on your head strap and you are golden. Say Hay to Ms T-Bone for me. Cheers!
Thank you, yes I thought the same thing. Gonna work on getting better with it, I'm a slow learner LOL I will be sure to tell Mrs T you said hello. Hope you are well my friend.
Great details and the new camera worked marvelous.
Thank you!!!
Love the new camera angles!!!!
Great work love the pip something new I like there on your videos. Great work getting this mower up and running 🔧
Thank you my friend
your new system works good
Thank you
Good information
It's working out real ⏩ good for you
Great video! My mower is now fixed. :)
Really it’s such a easy carb to clean and should last for years if fuel is clean
I like to use dielectric/silicone grease on all O-rings since it’s already on my bench for other uses. I also apply some any place two plastic parts rub on each other.
I never knew that plastic tube came out I’ve watched a lot of videos about this carb and even cleaned one out,(I was successful in the mower running but I think I’m going to take the carb off and clean it again and take that tube off and clean the emulsion tube, I need to do a deep cleaning anyway so I’m going to do it while I have it apart thanks for the info
T Bone one of your best videos yet. Excellent video quality with new camera (was it mounted to your head?) and good camera angles and inserts with very good quality audio. 100% accurate detailed information provided BRAVO! The only thing i would add it that we always pressure test the carb with our pressure gauge test tool to ensure needle valve sealing when it is upside down prior to reinstallation, then we fill with fuel to see if it leaks (basically bench testing) before installing the air filter housing.
Thank you.
Thank you I will try it
Well thank you for the video T-Bone video was excellent
Glad you enjoyed it
Thanks T-Bone! Another great video!
Excellent, thoughtfully produced video. The fuel cap on my mower was a pos, always collecting dirt around the lip. After doing this same procedure twice this summer, a third stall out on a customers yard lead my to a different solution. I beat the sht out of the mower with a hammer, rendering it inop. My heart thanks me every day. I don't have time to deal with trash out in the field. I'm always careful refueling, have never had any problems except with these modern, over engineered piles of garbage.
New camera is great - on your forehead?? Love your videos - wish you had a new one everyday!!!
Thank you. Yes forehead gonna work on doing better with it. Thanks so much for supporting us. We only have 4 more subscribers to cross the 10k mark 😀 Thanks to viewers like You
Thanks for the info! New subscriber! Thoroughly detailed, awesome video.
Great video thanks helped me out a lot Thanks 🙏
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 One thumbs up for every time you said y'all! Thanks for you great video, it made it easy to fix my carb!
🤣 🤣 🤣 🤣 🤣 thank you!!!
Worked, thanx! Owe u a cold one!
Thanks!
Wow!!!! Thank you Matt!!
This video is very much appreciated. Thank you
This is the best example I’ve found. You have a new follower.
The new camera works good T- bone. I hope all is well with you and Mrs T-Bone 🔧👍
Thank you my friend. Yes we are doing good. Hope you are also.
Straight to the point!!! Your a good teacher boss thanks
This was a great tutirial and the visuals were second to none. Ill have ti dig deep for the patience to do this though.
Thank you. Just take your time with it, I'm sure you will do a great job. Pay careful attention to the steps in the video. Let us know how it goes for ya.
Thank you good info
Thanks for the info!!
Very useful video and clear step by step instructions. Thank you!
thanks a million!
You're welcome 😊 Thanks for commenting.
Just what i was looking for! You the man!
Thank you, glad it was helpful my friend