Would love if they added something similar to Izotope voice de-noise. It's really good at removing things like fan noise without changing your voice to much. Because even with a noise gate you still hear loud fans when you speak.
This was a wonderful guide! It really hammered home my NEED for this to add into my stream/podcasting adventure. I thank you for your time! You the man!
Thanks for going over the Preamps because most videos just say they are really good. I would love this to get out of my Voicemeeter setup - what is the resource comparison from voicemeeter to the GoXLR app?
Your preamp comment on focusrite makes so much sense. I have an Audio Technica AT2050 and I even have to turn the gain pretty much all the way up for my friends to hear me on discord. Just purchased the goxlr mini. Retiring the scarlett solo.
I tend to gravitate towards the GoXLR "proper" for the 10 band EQ and De-Esser. Don't really use the sound pads and the automated faders are just jingling keys. Is the more expansive EQ and De-Esser worth the added $ and space consumption or is it psychosomatic at this point?
I'm using VB Potato with one VB-Cable and the HiFI ASIO Bridge. On both are limiters running with Equalizer APO. Then I'm using the Voicemeeter Insert to have some nice VST effects on my mic (VOLA2, Mequalizer,SEGX2) which I then monitor at a buffer of 96 via ASIO from my Soundblaster Z. This works amazingly well but only because I have a 3700x so I don't really have sound poppoing because of the low buffer. But Epos is right. This does sound super complicated and has it's own issue that you have to know your way around.
Hey, It seems like you know what you are doing with VST Plugins and VoiceMeter Banana so I had quick question and maybe you could point me in the right direction. How is your exprience with VST Plugins / APO / VoiceMeter for System Wide (not only for streaming) microphone processing and what plugins you are using? Do you get issues like lot of lag, robot voice, it being a hassle crashing and so on? My main goal is to have system wide microphone processing (gate/compression/limiter/EQ) not only for OBS (could do VST plugins in OBS) and Recording (I could do that post) of course saving money when it's not necessary to spend. I would have no issue setting up VoiceMeter and Vitrual Audio Cables or even VSTHost, but I am scared of having bad experience even after setting it up properly, with lag, robot voice, cracking and with too much hassle. I got a 4c/8t 4770K CPU, 16GB RAM , for audio I got Sound Blaster Z already. Planning to upgrade CPU when new Zen3 comes out. I will need a mixer or audio interface down the line for Studio Monitors. GoXLR Mini low-key sucks that it doesn't have output for Studio Monitors, it would been instant buy for me if it did or either 300ohm Headphone AMP or 2 XLR inputs, either one of those. At lower price point, Audio Interfaces all offer that, just that DSP for Mic.... Thanks
@@KryssN1 ELEMENT by Kushview with a VST Chain of VOLA > reaJS De-Esser > SEGX2 gate. No other free plugins gave the results I want. Hooked up to the Voicemeeter Insert where I can then send the processed mic to VAIO. This is then used by Discord etc. In OBS I use the ASIO plugin so I only have to correct by like 2ms. Least I use Voicemeeter HI-FI cable for all my System/Game audio needs. EAPO doesn't work on VAIO etc. for whatever reason so I need to use this. It then sens the sound via ASIO to VB VAIO. Default Audio device needs to be HI-FI. On this device you can then add more VST effects for SYSTEMWIDE use via EAPO. I have a brick wall limiter on it. On VB-Cable A (Discord outpuit) + B(Spotify) I have it too. I'm using LoudMax. I can monitor myselfs this way easily with a 96 buffer on my SoundblasterZ and everything else WILL have a slight delay of about 1-10ms maybe. I have a 3700x though. Before I had the 4790 and it wasn't always that nice. Had to have the buffer at 192 or it would crackle on high usage. Still does on the 3700x on 96 but only when my CPU is pinned rarely happens while gaming.
i think wave xlr + stream deck mini to control wave xlr is the best combinaison. it's why wave xlr has no buttons, it's intended to be combined with a stream deck.
also the wave xlr come with 2 separate levels for each source : 1 for user, 1 for spectators. i don't figure how you achieve that separate volume with only 1 slider for each source (without using a software iin addition to the material).
I am between EVO 4 and this Go XLR Mini. EVO allows to connect it to your mobile (for example to use your Shure SM7B in a video call in Skype), and also use it directly to your digital camera, without a computer. As Go XLR Mini configures everything in your computer (assign the use of each knob), I am not sure if this device can be used without a computer, just as a preamp for a mobile phone or digital camera. Is that possible?
I was reading the specs and for me the biggest let down was the 24bit/48khz. I know the market they were aiming for but they would have opened up an even larger market if they would have done 96khz or 192khz. Since they are having manufacturing problems and the queue is very long it is all a moot point and a MOTU M2+DBX 286s will have to suffice.
Glad I saw your video about the Soundcraft Signature 12 MTK before these came. These are nice, and different, so can't directly compare, but still, it's so good with so many capabilities.
The preamps in a Focusrite or Behringer aren't cheaper. The SM7B is a dynamic mic, meaning it doesn't use phantom power like a condenser mic would. That's why you would use something like a Cloudlifter with it.
Those are two completely unrelated statements. Yes, SM7B is dynamic and doesn't use phantom power. That's completely irrelevant. A high-end pre-amp that can provide +75db or more of gain means having a clean signal from such a mic without the use/need for a cloudlifter. The GoXLR and Mini do this. (Mini provides slightly less gain but still enough). In fact, the cloudlifter can even add *more* noise because it's lower quality than the MIDAS pre-amps inside. Pre-amps in a cheaper Focusrite or Behringer interface, however, cannot provide enough gain for this, thus a cloudlifter is needed. They require higher cranking to reach required audio levels, and upon doing so, add a lot of noise to the signal. By all objective measurement of how pre-amps work and quality is measured, they are lower quality/cheaper pre-amps. That's literally what separates quality tiers of pre-amps.
I was looking at this product and I currently use a Audio Technica AT2020 usb and a pair of Astro A50s the 2016 version, so they are wireless with no audio jack and use an optical audio jack to the pc along with an usb for power. Will I be able to use the Go Xlr mini with those two items? I just want to make sure I can still use the peripherals I own now and won't waste a bunch of money on others. Thanks and Great Video!!
I'm learning a lot about video recording by watching your videos, but it's at this point making me (more) aware of how much I don't know. What I do know is audio recording of vocals and guitar into my UAD Apollo Twin MKII Quad (with Console software and various UAD plug-ins), aided by a UAD Faderport, with outs to my studio monitors. I've checked on the UAD boards and just generally googling, and haven't found anything about using this set-up for audio and integrating it with video. Do you know if this is possible? Thanks!
I don’t understand why the decided to limit the goxlr devices to one xlr jack. Due to this I’m leaning toward getting the Rodecaster pro especially since they have the built in filters per channel. I might not need 4 microphones, but I typically need at least 2 microphone inputs.
It's weird having a steady hum on an audio product review. Stops when you go into the post-production addendum stuff though. Might want to use headphones when editing. Just a thought.
Yo, Mr. Vox, huge fan of your channel. I'm trying to develop a career in Radio and Voice Over, so (in all honesty), your reviews are really helpful when it comes to equipment. Would you consider doing a review of the Shure SM57 dynamic mic? It's normally a guitar and drum mic, but some people do use it for Voice Overs with a degree of success, would love to get your take on that.
Well damn. I just got a Focusrite 2nd Gen to replace my Behringer UM22, because the regular sized GoXLR was too expensive. I didn't know the mini existed! Instant ragrats.... EDIT: would I be able to use both? IE, connect my mic to the Focusrite, then send it to the GoXLR mini via Line In/Out?
The only thing stopping me from pulling the trigger on the Mini for right now is the fact of the issue with the app/software not saving the settings that you've applied past app closures & or PC restarts, reboots or shutdowns. 😞 😒 However, with that being said, if at some point in 2020 they were to roll out an overhaul or update to the app/software which solves the aforementioned problem I'd buy one in a heartbeat. 😄
Wait what? That's not an issue at all. They have profiles for this very thing. Settings save. Have since I got the big one in March, and same applies here. Not sure where you got that.
So I have the Logitech G230 headset which sounds spectacular both mic wise and headphone wise, but the ONLY thing I want is to be able to turn them up more while listening to music with them. So I'm not sure if this can do that or if you can tell me anything to simply just do that, cause I have all settings at max but I heard there's some sort of hardware that can up the max volume or whatever.
how well do your headphones perform with this interface? I have the sennheiser hd 6xx and the focusrite 2i2. I have to use a separate dac/amp for my headphones for them to get loud enough for me. I'm hoping to find a device that will replace both. Do you think this would work?
I don't like having headphones on my head all the time, they give me headaches. And I get hot easily so during the summer I'm sweating which makes headphones very gross
quick tip if you live in the us and want the full size cheaper order from amazon in france you have to pay shipping but even after that it came to $328.70 instead of almost $500 in the us :)
Awesome Video! Currently using the GoXLR for streaming but recently my friends on Call of Duty Modern Warfare keep telling me that they are getting an echo on their end but I dont hear anything on my end. In the routing area I only have my Mic routed to chat and to sampler. I've disabled everything in sound control panel other than the GoXLR . I use it with OBS and it is the GoXLR is the only device that is enabled. Any help would be great!
I ordered the GoXLR mini last week and this video was great! current setup is a Procaster -> DBX286S -> UMC202HD -> Headphones & Studio Speakers. Would it be possible to route the GoXLR mini into this audio chain, to have added control as well as speaker output, and hardware voice monitoring on the UMC202HD?
You could take the 202's line out into the line in on the mini. But that'd get pretty ridiculous, you'd possibly run into USB driver latency issues as described, and most of the functionality of the mini would not be utilized. Would make more sense to replace the 286s and 202hd outright
@@EposVox I appreciate the reply! All i'm worried about is that I'm gonna lose de-essing from the dbx286s + zero latency voice monitoring and speaker output from the 202hd. I guess it's still possible to use the DBX282s -> goXLR mini for additional tweaking and de-essing, before entering the goXLR. Do you think that would be a worthwhile chain to have audio wise? I dont see how I could use the 202hd since it's an audio interface connected through usb and the goXLR also is connected through usb.
@@agsoren For audio channel control and stream deck like exprience you can use something like VoiceMeter + MIDI Controller like APC Mini 80 USD. If you gone GoXLR Mini route, you can use subtractive EQ as means of de-essing.
Is it possible to do a video on how to setup and use both units together with a 2 PC setup? I have the mini and the GoXLR in a 2 PC setup, but I am not sure I am using it correctly. only getting the stream PC audio to OBS, but not the gaming PC.
Me: *Buys Behringer USB audio interface for new Q2U that Epos recommended.* EposVox is a video released the next day: 1:27 I'm not sad, I just love the timing. :D
@@EposVox True... but we all know I'm going down a rabbit hole by jumping into the audio pool and in 6 months I'll be getting one of these anyways. LoL.
Hey, Epos Vox. Was wondering if there was a way to where you can monitor your GoXlr Mini settings but with a USB headset or a headset not plugged in directly to the mini? Thanks!
@@spoiledpoorboy apparently, you run an aux cable from the line into your pc and go into your sound settings and listen to the audio through your usb headphones.
Hey! You mentioned you use studio monitors with the goxlr. How do you do that? With a splitter on the headphones jack to create balanced outputs? Other setup? Thanks!
@@KingSolrac Hi, this is a little late. I have some beyers (80 Ohm) with a focusrite scarlett solo, does this power them sufficiently? I produce music too so I need them loud. (also looking to upgrade my mic to shure mv7) so your combination relates to me :D
Thanks for the review. A few questions: 1- Do I need to have additional phantom power for the condenser mic or this unit take care of it? 2- How to setup this with both condenser mic and arctis 7 mic? 3- Speaking of arctis 7, so basically chat mix can be done directly on this mixer rather than the built in one?
@@EposVox Thank you. Shortlisting this for my next buy although just need to make sure I can use this to setup to use condenser mic for the stream and headphone mic for the in-game chat.
Hi@@EposVox , I have burning desire to find out the answer to my question and wasn't successful by Googling nor asking so far. I need an audio interface/mixer for my xlr mic and I really like the little brother of the goxlr, which is called the goxlr mini. (Fits well within my budget and takes up less space, etc) but the manual of it does state that the phantom power only provides a 24 volt punch as it draws power from the USB of the PC. Knowing that I have a safety belt of gain with a cloudlifter like the CL1 would make me feel at ease, but I'm unsure right now whether the 24 volts would actually be able to power it, also unsure whether a pluged in monitoring mic would further cause issues or any performance decrease when it comes to the performance of the cl. Would you be so kind to confirm the validity of my fears or dismiss them?
Hey Adam - Super review... Ready to pull the trigger but i would love to know if it's possible and how to add Pre Recorded Sound Clips / Intro/Outtro to a recording with the Mini? Thanks
EposVox that works with the mini, it doesn’t seem to have a sampler at least physically on it. you mentioned a folder Debating on this one! Would be nice to be able to put a 2nd mic via XLR for guitar, looks like it would have to be done via 3.5mm I also only use my mic and system audio, no discord/party chat (though having separate volume for alerts is nice, supposed to have that in OBS but it doesn’t seem to be working great for me) I also use speakers!
But if I stream music, what should I get? Something that gets the same adulation from you, but from the perspective of someone capturing acoustic instruments and vocals
Hello, my friend, I have a HyperX microphone, but I did not reach the required sound, and that it is clear and pure like the one you have. Do I need a sound card or a recording program, including Isolate Note
Hi there. I take meditations etc over zoom and want to go from usb to xlr. I found it hard in the past to get the right volume levels to go with my voice and wonder if this is something that will work as I would like to keep my voice as rich as possible. I also plan to do voice overs too. Best wishes ☺️
14:52 What is the small pop filter called that you're using on twitch stream? Are you pairing it with the Rode Podmic? May I please have the name to that pop filter please?
Uhh it looks like my Yamaha AG03 and Voicemeeter had a baby :D And that could be a valid alternative for my setup, but Voicemeeter has VBAN which is super convenient for dual streaming PC setup which I currently use
up to this point i thought i was the only one using an AG03 (with VAC tho). on topic: agreed. also, it mostly depends how well-versed you're with software and how much value the 100$ difference hold for you.
probably a stupid question but can this be used as an amp/dac? I'm looking for one device that can power the 250-ohm headphones I have and have mixer capabilities to try to save some cash.
Hello, just wondering, between the GOXLR and BabyfacePro, if the soundboard and on-demand voice change isn't a big factor, which one would you recommend?
Hey, very good video! I see you saying this is best for under 400, but if you had to pick between this or your Soundcraft mtk, which would you go with? i'm in the position
Depends on what your needs are. They serve pretty different purposes overall. If you JUST need a few virtual audio devices, this is the far better option
@@EposVox Thanks for the prompt reply!! I think what I'll do as the GOXLR bigger one is just £235 currently, I'll give it a go, then if it doesn't suit me, I can just return to Amamzon. I s there a simple way I can listen to music so I hear it louder than my viewers can? I already have a 'safe' level which all can enjoy, but sometimes it'd be nice if I could hear it louder at times?
My struggle with the GOXLR is they are just a USB interface with fancy software, it has nearly no analog features, so it's just VST for people who don't know audio stuff
@@EposVox I would love to see a video about VSThost software and various digital mixers like voicemeeter, which can be used to reach similar functions as the GOXLR, not as simple but much more affordable/free
What audio interface or gear would you recommend getting if the majority of use is TH-cam tutorials running into my camera but with some zoom calls or live TH-cam for streaming with audio running into my pc?? Thanks!!
Hey man so i picked up an re20 and a go xlr mini because i needed good audio and you kept praising it. I'm having really hard trouble setting it up. Can you please help me or give me your settings
If I'm looking for a mixer like you mentioned having a 3:10 that can do the multiple inputs/outputs over the USB is there a specific term to look for when shopping mixers?
Hi, I'm considering one of these for voice recording because of one of the EQ and Compressor. Does it typically have a better preamp than a Tascam interface?
TVperson1 yeah definitely better then one of those, the best way to choose between the mini and the regular is one do you have enough money for the regular GOXLR and do you need the sampler and voice effects, if you don’t care about them get the Mini, both have the same pre-amps that are great, got my mini about 2 weeks ago and I’m pretty happy with it
Thanks for going over some of the Mini GoXlr's capabilities and differences that Harris Heller did not. Much appreciated.
Sleeping Elephant lol wyd here!
Drinking that hatoraid. Harris has good reviews just not as detailed.
Love that you're watching Red Vs Blue in the background! Gotta love the classics!
Those tarifs are insane ! The Mini is 150 euros (with taxes) in europe and the regular is like 319€
Wich make them impossible to ignore !
Yep
God loves you all and has a plan for your life
i know you wont see this probably but could you compare the goxlr against the fifine audio mixer
Would love if they added something similar to Izotope voice de-noise. It's really good at removing things like fan noise without changing your voice to much. Because even with a noise gate you still hear loud fans when you speak.
Always upfront and 100% clear on the disclosure. Thanks, man.
God loves you all and has a plan for your life
On the settings, try holding down your control key while sliding. In most audio editing software that gives you fine tuning on sliders and knobs.
I'm finding it nearly impossible to find a GOXLR at anything less than double the normal price. Are there alternatives? What's the next best option.
This was a wonderful guide! It really hammered home my NEED for this to add into my stream/podcasting adventure. I thank you for your time! You the man!
God loves you all and has a plan for your life
"The only audio product"
Microphone: Am I a joke to you?
> Headphones enter the chat
>rgb has entered the chat
>mechanical keyboards have entered the chat
vocal chords have entered the chat
>rgb has entered the chat
This is too cute....
ankoftheA >audio cables would like a stern word
Thanks for going over the Preamps because most videos just say they are really good. I would love this to get out of my Voicemeeter setup - what is the resource comparison from voicemeeter to the GoXLR app?
Your preamp comment on focusrite makes so much sense. I have an Audio Technica AT2050 and I even have to turn the gain pretty much all the way up for my friends to hear me on discord. Just purchased the goxlr mini. Retiring the scarlett solo.
Bruh I was just literally watching Alpha Gaming goxlr setup vid from yesterday and you came in with this. 👌
man his setup video exhausted me and i deleted it off of my saved best buy items lol "uhhh nah im too lazy for all this right now"
i never noticed there were a goxlr mini out there. might be interested in.
Do you need a cloudlifter for the rode podmic with this?
No
I tend to gravitate towards the GoXLR "proper" for the 10 band EQ and De-Esser. Don't really use the sound pads and the automated faders are just jingling keys.
Is the more expansive EQ and De-Esser worth the added $ and space consumption or is it psychosomatic at this point?
I'm using VB Potato with one VB-Cable and the HiFI ASIO Bridge. On both are limiters running with Equalizer APO. Then I'm using the Voicemeeter Insert to have some nice VST effects on my mic (VOLA2, Mequalizer,SEGX2) which I then monitor at a buffer of 96 via ASIO from my Soundblaster Z. This works amazingly well but only because I have a 3700x so I don't really have sound poppoing because of the low buffer.
But Epos is right. This does sound super complicated and has it's own issue that you have to know your way around.
Hey,
It seems like you know what you are doing with VST Plugins and VoiceMeter Banana so I had quick question and maybe you could point me in the right direction.
How is your exprience with VST Plugins / APO / VoiceMeter for System Wide (not only for streaming) microphone processing and what plugins you are using?
Do you get issues like lot of lag, robot voice, it being a hassle crashing and so on?
My main goal is to have system wide microphone processing (gate/compression/limiter/EQ) not only for OBS (could do VST plugins in OBS) and Recording (I could do that post) of course saving money when it's not necessary to spend.
I would have no issue setting up VoiceMeter and Vitrual Audio Cables or even VSTHost, but I am scared of having bad experience even after setting it up properly, with lag, robot voice, cracking and with too much hassle.
I got a 4c/8t 4770K CPU, 16GB RAM , for audio I got Sound Blaster Z already. Planning to upgrade CPU when new Zen3 comes out.
I will need a mixer or audio interface down the line for Studio Monitors.
GoXLR Mini low-key sucks that it doesn't have output for Studio Monitors, it would been instant buy for me if it did or either 300ohm Headphone AMP or 2 XLR inputs, either one of those. At lower price point, Audio Interfaces all offer that, just that DSP for Mic....
Thanks
@@KryssN1 ELEMENT by Kushview with a VST Chain of VOLA > reaJS De-Esser > SEGX2 gate. No other free plugins gave the results I want.
Hooked up to the Voicemeeter Insert where I can then send the processed mic to VAIO. This is then used by Discord etc.
In OBS I use the ASIO plugin so I only have to correct by like 2ms.
Least I use Voicemeeter HI-FI cable for all my System/Game audio needs. EAPO doesn't work on VAIO etc. for whatever reason so I need to use this. It then sens the sound via ASIO to VB VAIO. Default Audio device needs to be HI-FI.
On this device you can then add more VST effects for SYSTEMWIDE use via EAPO. I have a brick wall limiter on it.
On VB-Cable A (Discord outpuit) + B(Spotify) I have it too. I'm using LoudMax.
I can monitor myselfs this way easily with a 96 buffer on my SoundblasterZ and everything else WILL have a slight delay of about 1-10ms maybe.
I have a 3700x though. Before I had the 4790 and it wasn't always that nice. Had to have the buffer at 192 or it would crackle on high usage. Still does on the 3700x on 96 but only when my CPU is pinned rarely happens while gaming.
Very nice video :) Atm I am trying to see how I should tune the EQ for MV7 with GoXLR mini.
i think wave xlr + stream deck mini to control wave xlr is the best combinaison. it's why wave xlr has no buttons, it's intended to be combined with a stream deck.
Thumbs up specifically for the Paul's Hardware shoutout :)
Thanks for changing your hair @epos. So distracting. 😂 but what’s up with your stickers on you be quiet case?
Dude, what type camera are you using? Your stream looks absolutely bananas.. Very helpful as well.
I wish these were available right now :( its out of stock everywhere or jacked up in price insanely.
does the noise gate/compressor settings work if you're connecting a 3.5mm microphone instead of XLR into the mixer?
also the wave xlr come with 2 separate levels for each source : 1 for user, 1 for spectators. i don't figure how you achieve that separate volume with only 1 slider for each source (without using a software iin addition to the material).
I was wondering what your thoughts on the Rodecaster Pro are? I was thinking about either that or the goxlr.
I am between EVO 4 and this Go XLR Mini. EVO allows to connect it to your mobile (for example to use your Shure SM7B in a video call in Skype), and also use it directly to your digital camera, without a computer. As Go XLR Mini configures everything in your computer (assign the use of each knob), I am not sure if this device can be used without a computer, just as a preamp for a mobile phone or digital camera. Is that possible?
I was reading the specs and for me the biggest let down was the 24bit/48khz. I know the market they were aiming for but they would have opened up an even larger market if they would have done 96khz or 192khz. Since they are having manufacturing problems and the queue is very long it is all a moot point and a MOTU M2+DBX 286s will have to suffice.
Would you recommend this to someone who records for a radio station as in pre - recorded content?
just bought the mini,, this helped alot thank u
also off topic but ur setup is hella nice it looks so cozy
Since the device is processing all the audio in software. I would like to seen the ability to use VST plugins..
Processing is on hardware. DSP
Why do no one mention that its only 24V phantom power? The focus is just on dynamic mics. Think it is worth mentioning at least.
Thanks... at least someone mentioning the elephant...
what did you use to record your voice for this video though? a condenser? tia
Glad I saw your video about the Soundcraft Signature 12 MTK before these came. These are nice, and different, so can't directly compare, but still, it's so good with so many capabilities.
The preamps in a Focusrite or Behringer aren't cheaper. The SM7B is a dynamic mic, meaning it doesn't use phantom power like a condenser mic would. That's why you would use something like a Cloudlifter with it.
Those are two completely unrelated statements.
Yes, SM7B is dynamic and doesn't use phantom power. That's completely irrelevant. A high-end pre-amp that can provide +75db or more of gain means having a clean signal from such a mic without the use/need for a cloudlifter. The GoXLR and Mini do this. (Mini provides slightly less gain but still enough). In fact, the cloudlifter can even add *more* noise because it's lower quality than the MIDAS pre-amps inside.
Pre-amps in a cheaper Focusrite or Behringer interface, however, cannot provide enough gain for this, thus a cloudlifter is needed.
They require higher cranking to reach required audio levels, and upon doing so, add a lot of noise to the signal.
By all objective measurement of how pre-amps work and quality is measured, they are lower quality/cheaper pre-amps. That's literally what separates quality tiers of pre-amps.
I was looking at this product and I currently use a Audio Technica AT2020 usb and a pair of Astro A50s the 2016 version, so they are wireless with no audio jack and use an optical audio jack to the pc along with an usb for power. Will I be able to use the Go Xlr mini with those two items? I just want to make sure I can still use the peripherals I own now and won't waste a bunch of money on others. Thanks and Great Video!!
I'm learning a lot about video recording by watching your videos, but it's at this point making me (more) aware of how much I don't know. What I do know is audio recording of vocals and guitar into my UAD Apollo Twin MKII Quad (with Console software and various UAD plug-ins), aided by a UAD Faderport, with outs to my studio monitors. I've checked on the UAD boards and just generally googling, and haven't found anything about using this set-up for audio and integrating it with video. Do you know if this is possible? Thanks!
I currently have a Bridge Cast X and I’m wondering about switching to a GoXLR/GoXLR mini what would you recommend
I don’t understand why the decided to limit the goxlr devices to one xlr jack. Due to this I’m leaning toward getting the Rodecaster pro especially since they have the built in filters per channel. I might not need 4 microphones, but I typically need at least 2 microphone inputs.
It's weird having a steady hum on an audio product review. Stops when you go into the post-production addendum stuff though. Might want to use headphones when editing. Just a thought.
Yo, Mr. Vox, huge fan of your channel. I'm trying to develop a career in Radio and Voice Over, so (in all honesty), your reviews are really helpful when it comes to equipment. Would you consider doing a review of the Shure SM57 dynamic mic? It's normally a guitar and drum mic, but some people do use it for Voice Overs with a degree of success, would love to get your take on that.
Well damn. I just got a Focusrite 2nd Gen to replace my Behringer UM22, because the regular sized GoXLR was too expensive. I didn't know the mini existed! Instant ragrats....
EDIT: would I be able to use both? IE, connect my mic to the Focusrite, then send it to the GoXLR mini via Line In/Out?
You could, but there would be virtually no point to that and only cause the described audio driver conflict issues
The only thing stopping me from pulling the trigger on the Mini for right now is the fact of the issue with the app/software not saving the settings that you've applied past app closures & or PC restarts, reboots or shutdowns. 😞 😒
However, with that being said, if at some point in 2020 they were to roll out an overhaul or update to the app/software which solves the aforementioned problem I'd buy one in a heartbeat. 😄
Wait what? That's not an issue at all. They have profiles for this very thing. Settings save. Have since I got the big one in March, and same applies here. Not sure where you got that.
@@EposVox Huh my bad dude I may very well have misinterpreted some information somewhere along the way.
My apologies. 😄
So I have the Logitech G230 headset which sounds spectacular both mic wise and headphone wise, but the ONLY thing I want is to be able to turn them up more while listening to music with them. So I'm not sure if this can do that or if you can tell me anything to simply just do that, cause I have all settings at max but I heard there's some sort of hardware that can up the max volume or whatever.
how well do your headphones perform with this interface? I have the sennheiser hd 6xx and the focusrite 2i2. I have to use a separate dac/amp for my headphones for them to get loud enough for me. I'm hoping to find a device that will replace both. Do you think this would work?
You mention that you try to avoid using headphones as much as possible, and use speakers instead. Is there a reason for that?
I don't like having headphones on my head all the time, they give me headaches. And I get hot easily so during the summer I'm sweating which makes headphones very gross
This along with a new mic (probably the Podmic) are my next upgrades.
Great video as always sir.
quick tip if you live in the us and want the full size cheaper order from amazon in france you have to pay shipping but even after that it came to $328.70 instead of almost $500 in the us :)
If you don't Stream, I guess you don't need the Broadcast Stream setting right?
Awesome Video! Currently using the GoXLR for streaming but recently my friends on Call of Duty Modern Warfare keep telling me that they are getting an echo on their end but I dont hear anything on my end. In the routing area I only have my Mic routed to chat and to sampler. I've disabled everything in sound control panel other than the GoXLR . I use it with OBS and it is the GoXLR is the only device that is enabled. Any help would be great!
This saved me $250! Was gonna get the GoXLR but the mini is all I really need! Mahalo brother!
tgg.MangryMe have you messed with it, is it worth it? The voice changer and sampler on the main one seem cool but I dunno.
I ordered the GoXLR mini last week and this video was great! current setup is a Procaster -> DBX286S -> UMC202HD -> Headphones & Studio Speakers. Would it be possible to route the GoXLR mini into this audio chain, to have added control as well as speaker output, and hardware voice monitoring on the UMC202HD?
You could take the 202's line out into the line in on the mini. But that'd get pretty ridiculous, you'd possibly run into USB driver latency issues as described, and most of the functionality of the mini would not be utilized. Would make more sense to replace the 286s and 202hd outright
@@EposVox I appreciate the reply! All i'm worried about is that I'm gonna lose de-essing from the dbx286s + zero latency voice monitoring and speaker output from the 202hd. I guess it's still possible to use the DBX282s -> goXLR mini for additional tweaking and de-essing, before entering the goXLR. Do you think that would be a worthwhile chain to have audio wise? I dont see how I could use the 202hd since it's an audio interface connected through usb and the goXLR also is connected through usb.
@@agsoren
For audio channel control and stream deck like exprience you can use something like VoiceMeter + MIDI Controller like APC Mini 80 USD.
If you gone GoXLR Mini route, you can use subtractive EQ as means of de-essing.
Is it possible to do a video on how to setup and use both units together with a 2 PC setup? I have the mini and the GoXLR in a 2 PC setup, but I am not sure I am using it correctly. only getting the stream PC audio to OBS, but not the gaming PC.
The beard is growing out and looking quite good, EpoxVox. Lol, random comment.
He's looking like such a dad, I love it
Me: *Buys Behringer USB audio interface for new Q2U that Epos recommended.*
EposVox is a video released the next day: 1:27
I'm not sad, I just love the timing. :D
I mean, you weren't buying it for a mixer, and you weren't paying for a GoXLR Mini anyway :P
@@EposVox True... but we all know I'm going down a rabbit hole by jumping into the audio pool and in 6 months I'll be getting one of these anyways. LoL.
Hey, Epos Vox. Was wondering if there was a way to where you can monitor your GoXlr Mini settings but with a USB headset or a headset not plugged in directly to the mini? Thanks!
This is legit my only question about the xlr let me know if you find anything.
@@spoiledpoorboy apparently, you run an aux cable from the line into your pc and go into your sound settings and listen to the audio through your usb headphones.
Can I use my HyperX Cloud Flights with the goXLR??
Hey! You mentioned you use studio monitors with the goxlr. How do you do that? With a splitter on the headphones jack to create balanced outputs? Other setup? Thanks!
5:50 just got a shure sm7b anjd someone recommended this! Going to attach my beyerdnynamic dt headset as well.. great review!
UPDATE: WOrks perfectly!
King Solrac dude ! It Works without fethead? And How much Ohm does your Beyerdynamic have?
@@guentherdiesau7542 250 OHM, and no need for a pre amp, fethead /cloud filter.. join the GOXLR Discord and they can help you perfectly !
@@KingSolrac Hi, this is a little late. I have some beyers (80 Ohm) with a focusrite scarlett solo, does this power them sufficiently? I produce music too so I need them loud. (also looking to upgrade my mic to shure mv7) so your combination relates to me :D
@@imortalXsoul if his 250 ohm headphones are powered then yours should be have more than enough
Thanks for the review. A few questions:
1- Do I need to have additional phantom power for the condenser mic or this unit take care of it?
2- How to setup this with both condenser mic and arctis 7 mic?
3- Speaking of arctis 7, so basically chat mix can be done directly on this mixer rather than the built in one?
1 - it supplies phantom power
2 - you can only use 1 mic at a time
3 - yes it will do this
@@EposVox Thank you. Shortlisting this for my next buy although just need to make sure I can use this to setup to use condenser mic for the stream and headphone mic for the in-game chat.
Hi@@EposVox ,
I have burning desire to find out the answer to my question and wasn't successful by Googling nor asking so far. I need an audio interface/mixer for my xlr mic and I really like the little brother of the goxlr, which is called the goxlr mini. (Fits well within my budget and takes up less space, etc) but the manual of it does state that the phantom power only provides a 24 volt punch as it draws power from the USB of the PC. Knowing that I have a safety belt of gain with a cloudlifter like the CL1 would make me feel at ease, but I'm unsure right now whether the 24 volts would actually be able to power it, also unsure whether a pluged in monitoring mic would further cause issues or any performance decrease when it comes to the performance of the cl. Would you be so kind to confirm the validity of my fears or dismiss them?
Hey Adam - Super review... Ready to pull the trigger but i would love to know if it's possible and how to add Pre Recorded Sound Clips / Intro/Outtro to a recording with the Mini? Thanks
Yep! Just drop em in the samples folder
EposVox that works with the mini, it doesn’t seem to have a sampler at least physically on it. you mentioned a folder
Debating on this one! Would be nice to be able to put a 2nd mic via XLR for guitar, looks like it would have to be done via 3.5mm
I also only use my mic and system audio, no discord/party chat (though having separate volume for alerts is nice, supposed to have that in OBS but it doesn’t seem to be working great for me)
I also use speakers!
Hi, what microphone did you use recording this video? I can’t find that info in the description.
But if I stream music, what should I get? Something that gets the same adulation from you, but from the perspective of someone capturing acoustic instruments and vocals
Anybody know what that TH-cam led box is called? The one above his camera? And where I can purchase one? Looks dope!!
Can you use a voice changer with this product like can you do voice changing affects with the mini?
Hello, my friend, I have a HyperX microphone, but I did not reach the required sound, and that it is clear and pure like the one you have. Do I need a sound card or a recording program, including Isolate Note
Hi there.
I take meditations etc over zoom and want to go from usb to xlr. I found it hard in the past to get the right volume levels to go with my voice and wonder if this is something that will work as I would like to keep my voice as rich as possible.
I also plan to do voice overs too.
Best wishes ☺️
Should I buy this or should I buy a cloud lifter for my focusrite solo gen 3?
14:52 What is the small pop filter called that you're using on twitch stream? Are you pairing it with the Rode Podmic? May I please have the name to that pop filter please?
As per usual this was an awesome in-depth very informative & interesting review and video, Adam. 😁 👌
Cheers man! 🍻
Uhh it looks like my Yamaha AG03 and Voicemeeter had a baby :D
And that could be a valid alternative for my setup, but Voicemeeter has VBAN which is super convenient for dual streaming PC setup which I currently use
You could use NDI plugins to send Video and Audio from one PC to another over your network :-)
up to this point i thought i was the only one using an AG03 (with VAC tho).
on topic: agreed. also, it mostly depends how well-versed you're with software and how much value the 100$ difference hold for you.
You can’t do voice effects with the mini which is weird. They should have replaced that bleep button with a voice effects preset button
Except getting the cost down meant removing the DSP chip entirely
EposVox yeah that makes sense
probably a stupid question but can this be used as an amp/dac? I'm looking for one device that can power the 250-ohm headphones I have and have mixer capabilities to try to save some cash.
Ryan Victoriano that’s the same question I have!, did you find out if it does work as a amp/dac? And how many ohms can it push?
Ferdinand _Rw still have the same question
What about the Elgato Wave XLR now?
Hello, just wondering, between the GOXLR and BabyfacePro, if the soundboard and on-demand voice change isn't a big factor, which one would you recommend?
How do you turn off the Goxlr Mini though? When I shut off my PC, the lights go haywire...
Hey, very good video! I see you saying this is best for under 400, but if you had to pick between this or your Soundcraft mtk, which would you go with? i'm in the position
Depends on what your needs are. They serve pretty different purposes overall. If you JUST need a few virtual audio devices, this is the far better option
@@EposVox Thanks for the prompt reply!! I think what I'll do as the GOXLR bigger one is just £235 currently, I'll give it a go, then if it doesn't suit me, I can just return to Amamzon. I
s there a simple way I can listen to music so I hear it louder than my viewers can? I already have a 'safe' level which all can enjoy, but sometimes it'd be nice if I could hear it louder at times?
So I have an Astros mixamp ,can I buy this and have the same functions? Like lower my friends voices so I can hear the game more?
Even if your not a streamer will these work with the senheiser HD 660s? I'm trying to buy those headsets with a mixer for it
Does the TC-Helicon GO XLR MINI run 250 ohm Headphones?
thanks for the review! looks like exactly what i need for my rode podmic i got for christmas!
How long of an XLR cable do you reccomend in general? Im trying to figure out between 6 feet or 10 feet for a Mogami Studio cable.
My struggle with the GOXLR is they are just a USB interface with fancy software, it has nearly no analog features, so it's just VST for people who don't know audio stuff
I mean, it's not VST. It's hardware DSP processing.
It's not an analog mixer, no.
@@EposVox I would love to see a video about VSThost software and various digital mixers like voicemeeter, which can be used to reach similar functions as the GOXLR, not as simple but much more affordable/free
do you have any videos on how to set up an astro mixamp with a elgato so streams can hear party chat from xbox?
I would love to see a feature added where the GoXLR would automatically go into sleep mode when windows shuts down.
I like the typo in your disclaimer: "purhcased".
Is it cat content then? 🤪
Thanks for the review! ❤️
What audio interface or gear would you recommend getting if the majority of use is TH-cam tutorials running into my camera but with some zoom calls or live TH-cam for streaming with audio running into my pc?? Thanks!!
Hey man so i picked up an re20 and a go xlr mini because i needed good audio and you kept praising it. I'm having really hard trouble setting it up. Can you please help me or give me your settings
probably gonna need an xlr mic and cable, a stand for said mic, and some headphones
If I'm looking for a mixer like you mentioned having a 3:10 that can do the multiple inputs/outputs over the USB is there a specific term to look for when shopping mixers?
Hi, I'm considering one of these for voice recording because of one of the EQ and Compressor. Does it typically have a better preamp than a Tascam interface?
TVperson1 yeah definitely better then one of those, the best way to choose between the mini and the regular is one do you have enough money for the regular GOXLR and do you need the sampler and voice effects, if you don’t care about them get the Mini, both have the same pre-amps that are great, got my mini about 2 weeks ago and I’m pretty happy with it
@@CJ-uh8bk Thanks, I'm only thinking of the Mini. I haven't fooled around with Voice changers for a while and I don't really need sound effects.
I have a steelseries USB headset. Would a GoXLR be possible with a usb headset?
Sounds kind of weird but what is the name of the desk chair xD
Can you use a usb mic and a wireless headset like Astro A50s at the same time?
What microphone was this video filmed with?
Question: can you hook up external speakers to a fader on thr goxlr mini??
Was going to get a mini...but then they're price gouged to the price of the full size. So guess I'll just get the full size
would it work better running it through a powered usb hub?
so my question is does my microphone and headphones connect to the goxlr even if it's connected to my pc by USB?
Can you chain these if you just want a digital mixer with say 8 faders instead of 4? Can the software handle 2 of them?
Can we use the GoXLR mini directly into iOS?
I think removing the DSr isn't that big of a deal. Hardly any noticable EQ difference.