How to remove a Ferguson TE20 or 35 Steering Knuckle (The Easy Way)
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2017
- In this video I just show a quick tip on how I release the taper on a steering knuckle on a Ferguson TE20 steering arm. The same goes for the Ferguson and Massey Ferguson 35. You could wrap the steel plate in rag if you didn't want to scratch your paint.
- ยานยนต์และพาหนะ
Thank you again for saving my day. Very handy to come inside, put on the kettle and have the problem solved straight away.
Glad to help.
Like your style Lance you got me going. Happy 70th Birthday Old Grey Ferguson
Nice and easy is the go.
London Calling - well somewhere in rural England. Excellent tip Lance, the amount of times that I have struggled to release these. Well no more, thank you. Chris Coopes.
Thanks Chris, Hope it helps somewhere in rural England.
Easy when you know how. Keep up the good work Lance.
Just a quickie that one.
Excellent idea thank you
You’re welcome 😊
Another great tip. Thanks Lance
Thanks Tony.
thanks again Lance!
Thanks, I was not having any luck doing it my way. it took a few more tabs than you did but maybe I was being a bit too cautious!
They do get quite stuck from time to time.
The good ones make anything look easy
Ron Kennedy thanks Ron
Thanks again Lance.
Thanks Jim
Nice work
Thanks
Wow, that’s cool, thank you!
Glad you like it!
Thanks mate
Happy to help
that will work well done
G day Bill, It works ok eh.
Sehr gut Lance
Thanks Gunter
Bloody handy you are Lance!
I am a bit handy eh, lol.
@@BundyBearsShed i was doing this very job yesterday and thought about the casing and wondered if someone had done it, low and behold the first video comes up! Bundy bears, spot on 👍👍👍
Hi, how do you fix the steering?. I turned the wheel while ball joints were off. Now 1 steering arm is facing the front and one is facing the back. The steering now apears to be out of its position now.. arms will not move now.
great. I have TEA 20 and its stuck in reverse!!!, going have to strip it unless I get some clever insights.
This video will make getting the steering box and gearbox cover off.
G day Patrick, The gear stick may just be stuck, I have got them free by putting a big screw driver in through the gearbox oil filler hole and moving the selector. You might get lucky.
Hey Bundy! Need some additional info, I've got replacement ends for my steering rods, how to you get them off? I've loosened the bolt but they are pretty stuck in there, any tips?
Try bashing along the tube to loosen any rust, as a last resort use heat, they can be very tight at times.
@@BundyBearsShed thank you!! :)
Hi Lance have you done a video on how to replace that seal for the steering box
On a 35 but not a TE20
Bundy Bears Shed are they similar?
Any tips for getting the one at the other end off? I'm assuming they are the same part so come off in the same way but ive put as much force into getting the bugger off as i dare and have now convinced myself im doing something wrong??? Do i just need to hit it harder???
G Day Steve, Same process, put a lever between the track rod and the top arm and lever hard then hit the arm with a hammer. Usually works ok.
So that's how you get the &%$* off,thanks Lance.
Well it is one way at least, there are probably many.
Thanks lance.FE35 by the way. :)
Hi, how do you fix the steering?. I turned the wheel while ball joints were off. Now 1 steering arm is facing the front and one is facing the back. The steering now apears to be out of its position now.. arms will not move now.
Emily Sweeney Auch, means you turned the rack all the way out so the pinion cant grab the tooth again.
That is a ridiculously simple solution.
And it works well and quickly.
You just can't mess with education!
Little tips and tricks help a lot on some jobs.