Ferguson TED20 Barn Find, Lets Get it Going Part 5
ฝัง
- เผยแพร่เมื่อ 12 พ.ย. 2017
- In this video we fit the distributor and actually get it going and go for a short drive.
When I tell you to turn the distributor at around 9.12 I say to retard go clockwise. That is WRONG you will need to go anti clockwise to retard the ignition. - ยานยนต์และพาหนะ
I love your videos. You are very detailed in how you explain what you are doing. I’m not a mechanic but I can follow along and learn how things work. Great stuff.
Glad to help
Lance great video. I used the series to service and adjust my distributor. The test light worked like a champ! Thank you
Great to hear!
Very helpful film, iv got my dads old 1952 TVO here in England, it’s not ran since 1980, and iv been working on it in the evenings, this video helped a bunch 👌
Glad it helped.
great job Lance, i,ve got a 54 H Ferguson TEA20,been sitting 2 years,and your videos are going to help me get it going lol
Thanks Steve I hope it helps.
Hi Lance, just a quick shout out to let you know I have learnt so much through watching a lot of your TEA 20 Video's. I'm 72 live in New Zealand and just purchased an old Tea 20 so your knowlege is awesome. Thank you so much . Merv Wilson
Thanks Merv, That is awesome!
Another excellent video lance. Will be very helpful in the future., Caught a glimpse of the Japanese riding boots towards the end.
Thanks Mal, Yes most jobs are done in shorts, singlet or T shirt and thongs lol.
great series lance, always learn a trick or two, looking forward to more videos !!
Thanks Michael, glad you enjoy them.
Hi great video's, I've just bought a 1951 TVO here in Wales UK and these video's will help a lot, thanks for posting.
Thanks for watching!
LANCE,never new about the hole through the flywheel just shows 67yrs and still leaning , I love the old saying ,a man that knows it all,I think you
knows f--k all !!!.regards from an old Pommy B.
Yeah never to old to learn.
Thank you so much for this video. I just replaced the points on my te20 to electronic points, Powerspark Electronic Ignition Kit for Lucas D3A4 Distributor Positive Earth (K33pp). The reason to do the switch to “point less” is the high humidity here in Denmark most of the year. Often the old points did not work well.
Any way you trick with the screwdriver in flywheel and rotating the distributor worked very well using a multimeter connected to the ground and the input side on the coil. Easy to measure when the distributer was in the right position!
Glad it helped, it usually works well.
Thanks Lance, you got me through a water pump replacement and now a new distributor and coil. I really appreciate these videos, thanks for sharing your expertise.
Glad to help
Thanks so much, just about the best explanation for installing a distributor
You're welcome! Glad it was helpful.
Good work Lance. Now you know that everything else works, its time for the flat head....lol. love your work, keep it up.
Thanks, I am thinking hard of a flat top one could be the go one day.
i dont mean to be so offtopic but does someone know a tool to log back into an Instagram account?
I was dumb forgot my account password. I would appreciate any help you can offer me.
@Ahmed Izaiah instablaster ;)
Very good governor setting video indeed, very interesting.
Thanks Leonard
A bit of trivia!
The petrol motor in the Fergy was used in the Vanguard Spacemaster, a sporty sedan sold in the 1950s in Australia and probably South Africa and New Zealand, but also in the sport Morgan 4+4 a rather snazzy sports 2 seater beyond the reach of most 18 Year olds of the day.
Hey Lance, you could probably hot up the old girl with a couple of SU carbs and some super grade petrol!!!! You could probably plough an extra acre per day with the improved performance.
Steve the ever hopeful young mechanic!!!
I know a fellow with a Triumph vintage race car with the same engine. He put new con rods in and a super charger and has 170hp at the rear wheels on the dyno. I was impressed with that!
Great video. I followed your instructions and now my ‘53 TE-D runs like dream. I put in the long spark plugs 14x23 mm, 0.34mm gap. The longer spark plugs should fit the kerosene top better than regular sized ones. Thanks...
Glad it helped
I just did up the distributor on my TED and couldn't find the right order for reattaching the plug leads. Your video helped sort it out. Cheers
Glad it helped
Spot on Lance :) Never knew about the hole in the flywheel before.
Trouble is you can be one turn out if you are day dreaming.
MalcOfLincoln .yoo'
Kenny
Huffing
Such a useful and easy to understand video. Thanks
Glad to help.
Thanks very much great video.
thanks Jimmy
It's alive!! well done so far mate
Yeah it lives lol. A few jobs to do on it yet so a few more videos to come.
Thank you Mr bundy bear, after studying your vids I've managed to get my dad's old fergy running sweet as a nut just in time to mow the hay! 🙂👍👍👌
Great work, Im glad it helped
Thanks for sharing, this is gona help me for sure!
G Day Mark, I hope you get something from it.
sure am mate!
Hi Lance ! Thank-you for all your useful videos . I am busy restoring a TED20 , just now , and have rebuilt the engine with new liners and pistons , so it is quite tight . I have got to the stage of trying to engage the starter with the ring gear , but although it spins , it does not engage . On taking the starter out again , it looks like instead of engaging , it is damaging the teeth on the ring gear .
I am just a novice at this , so would appreciate your advice , to get my resto back on track ,
Thanks in the meantime ,
Ted .
G Day Edward, Email on bundybearsshed@gmail.com. Can the engine turn over by hand easily?
The tape on the steering wheel is a trick they use in formula one, so they know when they are going straight.
It is such a powerful beast, very similar to formula one lol.
Great video Lance. I'll try and set the timing. I've got drama with my TE20 . cant seem to get it running smooth. she's got a popping sound when on idle . can't tell if it's fuel or electrical related? replaced points , plugs and kit through the carby. wondering if you'd point me in right direction please?
Popping can be a tight valve, have you set the tappets yet? They do sound a little rough at idle often but under load they settle right down I have found out at times.
Nice Lance 👍
Thanks.
great video Lance i just replaced my clutch on my ted and need to replace seals on stering arms have you made a video on same it would be of great help as was the one for clutch wonderful work love goldie regards frank
Not yet but I will.
Bloody brilliant mate so how many times have u left the screwdriver in the flywheel then ? .! Thanks for another good one.
G Day Steve, I haven't left it there yet but I'm shit scared I will one day and I imagine it might be hard to get out then.
muy bien gracias
Good to see it crank up. You have a working tractor. Now how about polishing it up a bit? I know it will not get painted green and yellow.
Probably a pressure clean only for this one, it would polish up with a month or two on a buff lol.
Hi, Great Video. I bought a kit online(leads, spark plugs, points, cap and coil) as the tractor would be going fine then just start coughing and spluttering. Could you tell me Is your wire from the ignition key going to the + or - on your coil? I have a positive earth also.
Also I have allot of slop in the distrubutor cam shaft, so much so that when adjusting housing to get test light to show, the points lobe is pushing the shaft around with it. Im thinking now this could be the root of my problem? I notice a couple of springs below the points cover to recenter cam shaft. Maybe these have lost there spring. Could you shed some light on this... am i barking up the right tree?
If you are running a positive earth system the positive terminal on the coil goes to the points and the negative goes to the ignition switch. The distributor slop can be a problem but I have found that opening the points to say 0.025" does help it a little. I have a video on restoring your distributor here somewhere .
Great video! What you presented, is it the same procedure for a TO20 Ferguson?
G Day Gilbert. I have never done a TO20 but I suppose it would not be very much different.
Hi just a question. I have a Ferguson ted20. I have been able to get it going from watching your videos as I am a newbie to it all and has been very helpful. I have given my Dynamo to someone I know that can recondition them and he asked if it was positive or negative earth. How would I know as when I had it it never had no battery on and had new battery terminals on the leads so I just put it on with the negative terminal to the lead that was earth out on the chassis of the tractor. It all works but not sure if it was a positive earth but how else would I know which way round the earth is? Thanks Ed
You can re polarise a generator but originally they were positive earth but if you want to run any modern equipment neg earth is the way to go.
So as long as I polarise the Dynamo to negative earth then I will be fine as I have the distributor and ignition coil set up to negative earth like you did in your let’s gets it started video
Hi lance. My mf35 petrol tends to spit and splutter similar to your grey fergie in the vid. When cold I can also see what I think my be petrol splitting out the exhaust,albeit only a tiny bit. When warm it splutters a lot less but still there. What do u think it is?
Got new plugs, dist cap,points set, standard ingnition setting, new plugs and leads, new wiring, carb rebuilt, clean fuel, sediment bowel clean, governor set nicely. Any ideas? Do they all do this?
I would think mixture adjustment would be worth fiddling with. Most times it is mixture or timing.
Hi Lance! I'm restoring a TED20 from 1954 and the engine has been completely dismantled. Do you have any idea of how the gear underneth the distributor should be fitted against the camshaft? Unfortunately I can't find anything regarding this in the workshop manual. I suppose it must be in a certain way so that the timing is right?
Best regards,Martin, Sweden
G Day Martin, I had a look in my manual and could not see it either but in the past I have the engine on top dead centre firing on number one and place the gear so the contact points would just be opening to fire on number one as well.
Of course, why didn't I think of that? Thanks so much!
Hi, I think the coil on my dad's tractor is caput, power to it but nothing after. The coil on there is a Lucas 4P 12 or HP12, hard to read. Should I try & find the same or is there a compatible one? Thanks
And internal resistor 12v coil will do the job for you.
good vid well done think we put a fireball 318 in this one lol
Well it has the flash steering wheel for it lol.
I got just one spark when i turn off the key. I have new distributor, new points, new condenser, new wiring, new coil new plugs. The spark disappears when cranking. Maybe points are installed incorrectly (touches the housing)?
Could be your starter drawing too many amps or just a poor connection somewhere.
Hello Lance! How do you know if the cylinder no 1 is at TDC for compression? Could it be on the exhaust stroke? Thanks in advance. Cheers, Paul
The rotor button will point towards the no1 spark plug or the no 4 rockers will be rocking
@@BundyBearsShed Allright. I'll take off the valvecover and check. Thanks!
Bundy, I don't know where my rotor was pointing when I took my distributor off. You don't mention in the video that there are actually 4 holes in the flywheel, so how do I tell which hole to set no1 cylinder to without perhaps being 180 reg out as no1 cylinder will rise to tdc twice but it's the firing stroke hole needed! Thanks
G Day Gordon, The distributor drive is offset and will only go back in and engage in one position. If you turn your distributor up side down and look at the drive web you will see what I mean. As the distributor is driven from the camshaft it has to be correct.
I'm with you there - so if you point the rotor at 10 o'clock & do your check for spark then only one of the 4 holes in the flywheel would ever be lined up with your screwdriver. I've been trying for a couple of months now to get my tea20 started (on handle as no starter - as a result bit tired!) no joy yet
How much rotational play should there be in the distributor shaft ? Mine seem to be able to turn quite a lot - perhaps 15-20 degrees ?
At the top there is a fair amount as you are just turning the plate the advance is on
@@BundyBearsShed thanks a lot - I thought the shaft was supposed to be fixed if I try to turn it by turning the pointer?
O
Hi lance,I have set the timing with the timing light as you have done in this video but my tractor runs rough .I end up rotating the distributor to get it to run anyway proper and it ends up miles away from where the timing light showed correct timing.Any ideas what could be wrong,Great video by the way.Thanks.
Possibly the oil pump shaft has not been timed correctly in relation to the camshaft.
Yes lance I have moved that around a bit.I am finding it difficult to get that right.
Hi Mare whet size socked will fit the plugs just got two bard finds both petrol tvo but need to goe the plugs out good luck Andrew
13/16" AF should do it.
Will this distributor-timing procedure be the same working on a TO-20 Ferguson? Thanks in advance.
Im not sure if it will with a Continental engine as we didnt have them here. Sorry but I cant really help out.
Thanks Lance
Any time
No hole in my flywheel. I do however have timing marks that can be seen with the inspection cover open.
Not seen a TED with an inspection cover, is it a TO20?
@@BundyBearsShed yes, it is a to20
Gidda Lance, What sort of plugs are you using.? Cheers.
These Bareco ones, www.queenslandtractorspares.com.au/Store/tabid/91/ProdID/2875/Default.aspx
Gidda Lance, Thank you very much.Great show on utube.It`s really interesting. Roy.
Very good if you're running tractor on kerosene it'll run good on champion n21 spark plugs
Thanks for the info
hey, is it the same with the ignition on a fe35? i can not really find a video where someone adjusts the ignition on a fe35 your videos are a big help 😀 regards martin from Denmark
Yes exactly the same
Sorry Lance but I am a bit confused. ('56 TEA20) Screwdriver in flywheel @ TDC then you mention 10 deg. I have done that and have the timing marks on flywheel showing '0' TDC so where does 10 deg come in...is the the initial static required by moving flywheel to '10' mark?
I think you will find the screw driver goes in at around 10deg. Not exactly on tdc
@@BundyBearsShed Thank's Lance for prompt reply...spose it's put it together and fire it up then! Being very positive here.....
That may be a TE20 but its not a TED 20 as the D meant it was a Diesel . we had one in the early 60's bought second hand around the time that Massey Harris took them over and the brought out the 3 cylinder Perkins engined Massey Ferguson 35
You are wrong there Tom, the diesel was a TEF 20.
@@BundyBearsShed OK correction noted
👍
On another of your videos you comment on the American version of aluminium ....
Why, in this video, do you call it a "rotor cap" when we in the UK call it a "rotor arm" ?
G Day Peter, Just a local term I would imagine, also called rotor button over here
Lol ,, spanner hammer 😊
I have a tool box full of them lol.
How do you ascertain if your TE20 is Delco or Lucas System?
Lucas has it on the tag on the distributor, I believe the Delco does as well.
How many times do you turns the carburettor main jet?
1 3/4 turns out from full in is a good starting point. For hard work open it to 2 1/4 if you need to.
Lmao, the hose wrapped wheel. :-D
Very high quality wheel that one lol.
I have a 1948 fergy lance straight petrol there is no hole under starter .
G Day Colin, My 48 has but never say never with these old tractors, it is only 1/4" and I have seen them blocked and painted over.
G'day Lance well the old girl runs, good one. Looking at her you wouldn't think that you would even get her going! When you come to doing a total restoration job do you replace or refurbish most of the parts, or replace for new? Thanks for the video it bought back old memories of trying to get my EH going on wet winters day. Thanks lance very interesting on how you went about setting the distributor John PS just one thing did you do a compression test before hand..
G Day John, No compression test on this as yet. Some times I restore the parts and others I just fit new ones. Sparex supply a few for me and in that case I just replace them. Very satisfying re building them though.
Bundy Bears Shed thanks for replying Lance I recon it would be a very satisfying especially when you see a tractor in that condition and restore it back to new like you have done before, great job John
These are Spark Plugs for a TEA 20 NOTE : TED 20 has 3/4 Reach Spark Plugs
These are hotter plugs we use. I have mixed and matched to see if I coulld feel the difference and to date I cant see any difference.
@@BundyBearsShed The TED head Has a Thread 3/4'' Deep the tea 20 Head only has a 1/2 deep thread The correct plug for a TED is Champion N21 or Equivalent
These carbs are a little temperamental, my late father was good in setting them up.
G Day Tony, Yes they can be a bit of a fiddle. The Gold 35 always has a fluffy idle but knuckles in with a bit of load nicely. Never been able to fix that.
Hi how you know you are on the good hole for the TDC of the 1? Because we have 4 hole
No4 valves rocking, or wind the engine with no1 plug out and feel for compression or the rotor in the distributor will point at no 1 spark plug. Either will work.
@@BundyBearsShed ok I try. It’s not a problem if I have moved the distributor before because I’m not sure to remember if the distributor was not turning by accident. Because I have added a triumph TR3 pedestal for ad a tachometer and I don’t remember if I have turning the rotor of the distributor to check but if I have turned the rotor and I replace it directly that a problem?
the drive gear for my distributor, when in the correct place, won't seat far enough to let the distributor mount to seat properly. It will only seat in two positions 180 degrees apart.
There is a key that drives the oil pump is it in the correct ce, they will only go in one way as the drive tang is offset.
@@BundyBearsShed thanks lance. Key is in place. I put the gear in place and riggled the fan and the gear dropped into place. I then used your test light trick and she started with choke. . Will only run for a short while but I have a stack of washers (.140") under the float needle to stop flooding. Will reduce washer stack so the bowl fills more. Love your clips and tips.
You can trade the green thing in now. You have a far better piece complete with 3 point linkage
lol.
Goodday how do I get a tune up kit for a TEA20 grey ferguson tractor
www.queenslandtractorspares.com.au
LInk to timing light? @Bundy Bears Shed
I didnt use a timing light on this one.
Vocês emuito bão,
Thankyou.
at 24:39 their was something dripping near the fan??? Not oil i hope
water, the pump is bad
Yes the water pump is bad, I have done a video on replacing it. It should be out in a day or so.
For some reason doing this my test light is always iluminated
That may mean that the points are dirty or not earthed out. The test light should go out when the points close.
@@BundyBearsShed thanks very much for your reply I will have another go today 👍
@@BundyBearsShed all sorted now 👍 thanks for your help!
That is good news.
Is that tvo in that fuel bowl Lance @bundybearsshed
No just premium unleaded probably old fuel.
now look ya looking i am left handed and bit thick i dare say u right so do a vid and show how me how it is ///let me dewell on it
what about setting the points????
That was covered in Ferguson TED20 Barn Find Lets get it Going part 4, I completely overhauled the distributor in part 3 and 4. No need to do it again here.
Link to video.
th-cam.com/video/MtbExzI5vNc/w-d-xo.html
👀 your water pump leak
Yep water pump leak and it has a new one now. Video on the way.
AAAAA when you open points you advance
But when you adjust points you should re set the timing or check it at least. Opening them can make it fire later.
I went through and replaced the points and condenser on my '55 TED20 (following your video on it) and set the timing with a test light just like you did in the video, but the thing wouldn't start.
It sounded like it was kicking back when it fired, as if the timing was way early, so I re-set everything to the witness marks as it was before i took it apart, and it fired right up!
Thing is the way it's set up right now is about 1/8 of a turn counter clockwise on the distributor, which to me sounds WAY retarded, am I missing something here or is there something funny going on with my tractor?
Many thanks for the videos, they're a great help and wonderful entertainment in their own right!
Someone at some stage may have the distributor drive gear off a tooth or so but the test light should allow for that but the flywheel timing mark will be out. On this video I miss spoke re retard and advance but I put a note in the description. In the end it is about getting it running correctly however you do it,
Thanks for the vid, just a bit confused. When you said after we have the screwdriver in the Flywheel and the points set to just opening you said to retard the distributor one line, but on my ted20 turning the distributor clockwise would advance the timing. Nick.
Yes I was backwards, I put a note in the description.
Very embarrassing when everything is set up and the engine will not start.
Can be but just have a look about and it will be obvious reasonably quickly.
🇮🇪🤔🥰👍👋
Thanks
by gum a little gray fergie buy gom son shea buty . Les england don't turn over to TVO to soon son . ,get her well, & worm . if you haven TVO 4 gallon OF paraffin TO one gallon of petrol. That what o ues in my gray forgy .
I should try that , something I havent got to do yet.
🐨 🧰 🤙🏼
👍 Very slow, I lost interest when We couldnt use it any more due to covid but I do a little now and then on it but nothing major.
@@BundyBearsShed your insïgh🌱 is More than 🦋elcome Teach’ 🍎
I’ve gotta acouple of semi-dormant projects on the priority books also, @ least they’re in the same postcode, Cheers 😉🖖🍻 GøV 🌅🦘🐨🦘🐨
you appear to know what you are talking about however you have absolutely no idea how to convey your knowledge to your viewers you have missed so much information (details) to effectively make this conversion. please take a bit of time to critique your own video.
You might need to understand how far back this video is, this was in the early days of the channel. You could possibly start a channel and show how it is done correctly. I would subscribe.