2003-2009 Mazda 3 Motor Mount (Passenger side)
ฝัง
- เผยแพร่เมื่อ 25 พ.ค. 2018
- GT shine products: gtshine.com/products/gt-twist...
Coupon Code: HELPINGHAND
-- Check out my NEW channel: / @knownworldwide
--------------- Hey guys here with a very simple DIY job on the 2003-2009 Mazda 3. Showing you how to replace the passenger side motor mount located under the coolant reservoir. This job is very straight forward and will take you about 20-30 mins to complete it. Thanks for watching!
If you found this video useful and would like to see more car repair content, please don't forget to hit that subscribe button! Also if this video was helpful to you show you like it by hitting the like button! If you guys would like to see any specific vehicle repair item please feel free to send me a message or simply ask in any comment section on my videos! I am here to help everyone fix their cars so that you guys can save money by NOT going to the mechanic shop. - ยานยนต์และพาหนะ
![[FULL EP.14] เซียนหรั่ง สอน มาร์ชจุ จับปูนา ฮากระจาย | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/M8mPjd_T2lo/mqdefault.jpg)
Many thanks for this video! It gave me the sense of security to do this myself. I'm retired on a low fixed income. The savings made it affordable enough to fix my 2009 Mazda 3i Touring with 2L "G" engine. By the way, all details, in the video, EXACTLY matched my car. I do believe, from looking at the video, the mount itself is the same. In my model year, there is a big plastic panel, under the engine compartment, that has to be removed, before jacking the engine. Great video! Well made, directly to the point, easy to understand and concise, yet not omitting anything relevant.
Excellent video quality, much better than most. Good work, just subscribed.
Tony Danis thanks! Appreciate that!
Just found this vid, it's 3 y o but still relevant as I am planning to do this job on my 2009 BL SP25. Thanks from Australia.
Glad you found it.
thanks for your explanation helped me a lot
Great Video. Really helped me change mine!
Joe Santana thanks!
Thanks man! Helped!
Very good job thanks for sharing
Amazing video
Thank you this really helped out!
Glad I could help.
Simply the best.
Thanks.
Gracias
Hi, just changed one on a 2012 Mazda 3
One of the nuts on the engine would not budge. Wound up removing the stud and cut off the nut.
Unsure how often this occurs.
Cheers from Australia
Ty
Amazing video. Straight to the point, great quality. Earned yourself a sub! Can you link the part you purchased? Thanks.
Thanks for watching. Unfortunately this was awhile ago and it was a customer’s car. If I recall, they bought a mount from their local auto part store.
If you have that top mount bad n come out in 2 pieces replace the other 2 they will be bad and worn out cusing engine to vibrate as you go foward.. On highway at 65 mph to 80 mph it will only do it on those mphrs .. I replaced all 3 and bearings cuz my bearings on hibs were bad .problem went away ..
Hi I have this engine mount broken ,
When replacing this do I have to replace the other 2 mount as the same time ?
Thanks in advance
Tan Ngo the other two mounts meaning the other engine mounts? If so you can as preventative maintenance. It’s not required though.
👍👍
Excellent videos. I have a 2017 mazda, the lower transmission mount was damaged, I changed the upper one too. I bought it at an auto parts store and what I noticed is that the rubber looked quite hard, I don't know if that has to do with the fact that now when I turn it on I feel that the steering wheel vibrates a little but when I turn on the air conditioning it feels a lot. ,When I'm driving the car it feels good, that is, it doesn't vibrate. What can be? Could it be that the support I buy does not absorb vibrations?
Sometimes the quality of mounts differ a lot between brands. Also the hardness of the rubber can vary as well. Harder rubber than factory will result in the vibrations you now feel. Additionally, there could be another mount failing as well.
@@HelpingHandAutoRepair Replaced with the original part purchased from the dealer and now it is clear. Thank you.
Hello bro i have a problem with my motor mount for the passenger's side. i have the mazda 3 hatchback 1.6. where can i buy this mounts. Thanks in advance
Denzill Kim you should be able to go to any parts store and order them. If that fails go to the Mazda dealership
@@HelpingHandAutoRepair Thanks for the feedback. It's that easy but the challenge i am in Africa specifically Cameroon. those parts are really difficult to get here. Mazda is one of those cars that are rarely used around. Toyota is at the top.
Denzill Kim so you cannot go on the Internet and order them?
Is that a hydraulic mount? Im leaking oil underneath mount.
Yes
Great video . I was wondering was it hard because my mechanic charged me 400 for it to be done
Nope super easy. Could probably knock it out in less than 30 mins
Do you drain the break fluid or just move the master cylinder
The brake fluid and master cylinder is on the other side of the car. That is the coolant reservoir. I just move it out of the way temporarily.
@@HelpingHandAutoRepair Love it out of the way, lol.
BTW -If you want to do it even cheaper, you can buy the mount without the bracket.
www.rockauto.com/en/moreinfo.php?pk=5619546&cc=1434568&jsn=480
Lol never noticed that until now. Fixed it.
How do you know if the other mountd are bad? Should you just change all of them?
Bad mounts will make vibration noises while driving or at idle. The easiest way to check other mounts is to have a buddy (or you) sit inside the car and start it up while the other person watches the engine. Then the person inside should cycle through the gears slowly. Go from P to R, then wait a moment, then from R to D. If the engine is moving (rocking back and forth) then you have other mounts that probably need to be replaced.
In addition to this method above, you can also go back and forth from D to R. This will really show a bad lower mount if you have one if the engine is rocking back and forth a lot. Keep in mind the the engine will rock back and forth SLIGHTLY. However excessive movement usually means a mount is bad.
Lastly using the same method above, shift into R and then WHILE HOLDING THE BRAKE PEDAL FIRMLY WITH YOUR LEFT FOOT. Apply some throttle with your right foot and see if the engine jumps up or moves. Try this again while in D also. If the engine jumps up or moves excessively then check the transmission mount and/or side engine mount.
@@HelpingHandAutoRepair thanks, I will do that.
Good video but I dont trust using driver like that to tighten nuts or bolts its super easy to over torque them doing that.
hi.. just have question.. so when I'm on 1st and 2nd gear .. it has rattling sound .. on on passenger side .. is this one of the sign of bad motor mount
Anthor Castillo Hard to give you accurate information without actual hearing it for myself. How I test for a bad mount is to actually have someone watch the engine while someone inside cycles the car from drive to reverse slowly and watch how much the engine actually moves inside the engine bay. You can also apply the brake and gas pedal while in gear to see if the engine moves even more. PLEASE DO THIS AT YOUR OWN DISCRETION. This can be dangerous if you are not careful.
@@HelpingHandAutoRepair thanks....
Did you find out what the problem was I have the same sounding issue I believe??
@@imaginemeking9695 yeap.. I found mine .. it was a engine mount .. next to the coolant reservoir.. .. parts cost me less than $15 in amazon.. (middle piece part) it's better if you can buy the entire mount .. not just that one part.. I know its cheap.. but it's a lot of work bending that metal piece that has rubber coated ...
How do you know the mounts are bad or need replacement?
Santana Garcia This one was physically broken in two pieces as you can see in the video. Bad mounts will usually be accompanied by clunking or thumping while accelerating from a light/stop sign.
@@HelpingHandAutoRepair thank you
I have a 2009 mazda 3 and I get a vibrating noise coming from passenger side when I go from stop to go than after I gain speed it stops . Was told it was the engine mounts but how can I be sure that's what is causing the noise ?
Does it vibrate loud while sitting a stop sign or light? If so it’s most likely the engine mounts. Which one it is you will have to look closely at them.
A truck you can try is to start the car up and let it warm up to normal temp. Then put it in drive and listen for vibration. If none in drive then put it in reverse and listen for vibration or clunks.
If you’re comfortable with it, have someone stand outside ON THE SIDE OF THE CAR and watch the engine. There shouldn’t be a whole bunch of engine movement. If the engine is physically moving around while you shift to park and drive excessively then a mount is for sure broken.
Yeah I had a friend show me that my engine moves around when pressing the gas and what not. But is that forsure what's causing the loud vibration when I accelerate?
Most likely yes as the rubber has deteriorated and now the metal portion of the mount is rubbing on the metal part of the car body.
@@HelpingHandAutoRepair okay thank you. How do I know which one is bad? Or do I replace all of them
If your boy was watching it while you were holding the brake and gas off and on you should be able to see where the engine is moving the most and then you know that one is bad.
what torque setting when tightening the bolts?
Mel Co I can’t find a real specific torque spec on the nuts and bolts. Just a range.
Nuts: 35-45 ft lbs.
@@HelpingHandAutoRepair not sure what you mean. Im not really savy in torque do i need to but specific range home depot etc?
Range of numbers. Not an Oven.
@@HelpingHandAutoRepair sorry typed one handed i meant the torque range do i need a specifc one?
It’s listed here in these replies.
Before you put it on did your car make a weird noise?
What noise?
@@HelpingHandAutoRepair the noise it does before you put it on?
Mounts can make a few different noises. Not sure what you mean. A bad mount can present itself as loud vibration, metal on metal thuds, loud random thuds on acceleration etc.
Where did you get the parts from ?
Elijahwade23 The parts store.
@Derek McBride I always find Rockauto is cheaper for me.
This is my second time replacing mine with a 140,000 mile Mazda 3.
Cheaper mounts won’t last very long unfortunately.
What is the code of the mount?
Code? If you’re looking for the part number, you would have to just search online or better yet, go to a local parts store and just have them get you the right mount.
I thought I did some acid or something when that music popped on
never use an impact gun on alumina..never!
jean Zakari relax. 😂 Everything is fine. Frame is steel. Bolts are steel.
Hahaha 😂 ya bolts and frame are definitely steel lol.
Can you please show were you placed the jack at?
This is a customers car. If I have one again I can do that. You might try to search google for jacking points. Hope this helps.