Appreciate the video.... probably not gonna use the 2 cans i got :( I wanted to do my emblems Judging by your results on the close-up issue it definitely should be sanded completely as youve said then use iso prop alcohol diluted to clean. All coats probably have to be super light , espicially the 1st and 2nd in order to get a better finish . Does it peel off fairly easy ?
Yes peels off very easy I peeled it all off and resprayed with plasi dip much better product driving now for four months and no problems whatsoever on the front grill isn’t as glossy, but it’s much thicker and more durable
I only lightly sanded a few of the lower components, paint would have definitely had a superior finish but I wanted the option to remove it if I didn't like the look
DO NOT use Rustoleum Vinyl wrap on a newer vehicle w/ clear coat, the paint will etch into the clear coat leaving your clear coat thin and will leave permanent masking lines anywhere there's been paint applied then masking removed. This product should have never been released to the public for automotive applications!!!!
Hmmm....I'm thinking I'm going to be sorry I spent over $30 for this stuff to spray some of my bike parts. Heading down to the garage now to give it a try.
If you’re willing to do a clearcoat, just paint it and clear it that’s your best option otherwise, use plasti dip spray I don’t recommend the rust oleum unless it’s in an area where you won’t get any road debris from driving like maybe rear emblems
Appreciate the video.... probably not gonna use the 2 cans i got :(
I wanted to do my emblems
Judging by your results on the close-up issue it definitely should be sanded completely as youve said then use iso prop alcohol diluted to clean.
All coats probably have to be super light , espicially the 1st and 2nd in order to get a better finish .
Does it peel off fairly easy ?
Yes peels off very easy
I peeled it all off and resprayed with
plasi dip much better product driving now for four months and no problems whatsoever on the front grill isn’t as glossy, but it’s much thicker and more durable
Why not just use paint? Especially since you mentioned sanding beforehand.
I only lightly sanded a few of the lower components, paint would have definitely had a superior finish but I wanted the option to remove it if I didn't like the look
DO NOT use Rustoleum Vinyl wrap on a newer vehicle w/ clear coat, the paint will etch into the clear coat leaving your clear coat thin and will leave permanent masking lines anywhere there's been paint applied then masking removed. This product should have never been released to the public for automotive applications!!!!
I used it and this is the exact problem I’m having
Hmmm....I'm thinking I'm going to be sorry I spent over $30 for this stuff to spray some of my bike parts. Heading down to the garage now to give it a try.
I didn't like the product had much more success with using plasti dip spray just has a more matted finish
Do I need a clear coat ?
If you’re willing to do a clearcoat, just paint it and clear it that’s your best option otherwise, use plasti dip spray
I don’t recommend the rust oleum unless it’s in an area where you won’t get any road debris from driving like maybe rear emblems
Doing any paint work outside you’re going to have a orange peel issue and contamination
One question will be, can I paint my hoot on my car, is it fiberglass?
I wouldn't, it chips easily , not suitable for front of car
Blah blah blah. Another amateur video with nonsense talking nobody cares about.