@@TNB23 lmao 🤣 yea I was thinking about adding a K n N dual cold air intake connect it to a nice mangnaflow exhaust.... differently getting way quicker exceleration 💯
So having the open box allows hot air into the engine bay. The top rim around the box does not sit against the hood of the car. This is a manufacturing/design flaw.
It would had been worth it with a lid. The FFS hood liner connector pins make divets and the box seal can't seal completely allowing hotter engine compartment air to be sucked into the filters, thus raising the IATs. A simple plastic lid, would have cost them $2-3, would have made this so much better and effective.
Just waiting for everyone to start blowing up the comments about it being an open box... "IAT'S IAT'S" these people really don't think an older car without a factory IAT gauge didn't have higher readings with a open CAI....
These guys are not real good at responding to questions guess they don't need the extra business from all the edge st guys I have a 2020 edge st found a kit by AFE apparently Steeda dosent need your business
I don't know if it's a manufacturing defect or what, but this thing literally does not fit in the spot. The complete waste of money and I called their customer service and that went nowhere fast
This looks like it’ll fit the 2015 Edge sport since you guys don’t make one specifically for the Edge
Lmfao best comment 🤣 💯
@@g13magurany lol gotta throw them some shade fr fr
Fr 😅 I have a 2015 Edge Sport lbvfs 🤣🤣
@@g13magurany me too lol. I might get something fabricated for the car.
@@TNB23 lmao 🤣 yea I was thinking about adding a K n N dual cold air intake connect it to a nice mangnaflow exhaust.... differently getting way quicker exceleration 💯
Does this work on a 2017 Lincoln Continental 2.7 twin turbo
Does the K&N cleaning kit work for these filters? Cleaner concentrate and an oil spray? Or what?
Do you make a CAI for a 2020 Edge ST?
After installation on my 2017 ford fusion sport the check engine light come on.
Need this to be California EO compliant. Lots of Fusion Sports in Cali and there should be a CAI available.
Will it actually show a measurable increase in performance?
no:-)
Yes
Make up my mind,!! Yes or No🤣
With a tune and a ram air yeah, most likely. The induction noise is noticeably louder too which sounds better
Will it fit the 2016 Lincoln MKX 2.7 ecoboost
I have a 2019 Ford Edge ST 2.7l TT. Do you have a tune for this and how much does it cost in Canada? Also what are the gains from the tune?
Unleashed Tuning has a tune. I have a 2021 Edge ST and thinking about getting one.
So having the open box allows hot air into the engine bay. The top rim around the box does not sit against the hood of the car. This is a manufacturing/design flaw.
Could you just buy 2 filters and throw them on?
Do you make a version of this setup for the 2020 Edge ST ?
This should fit the Edge ST.
Can this fit my 2016 lincoln mkx,and where can u buy it
How much extra horsepower
Can y'all uh....create one with a lid? Or a seal?
It would had been worth it with a lid. The FFS hood liner connector pins make divets and the box seal can't seal completely allowing hotter engine compartment air to be sucked into the filters, thus raising the IATs. A simple plastic lid, would have cost them $2-3, would have made this so much better and effective.
Call me nuts but doesn't the fact that they are facing perpendicular mean that one gets cool air, the other gets sloppy seconds?
Hi,
Since the air flows, it actually wraps around to the cones evenly
Would this kit work on a 2015 Ford Edge sport, twin turbo 2.7 eco boost engine?
Bro I’m wondering the same thing.. Guess someone has to take the chance it, looks like it fits though
Lol. Same question.
2020 Edge ST
Did anybody figure out if it will work for 2015?
@@juniorhernandez9693 it won’t. I had to make my own
Why doesn't anyone make one for a 15 edge sport? If they do I haven't found one
Just waiting for everyone to start blowing up the comments about it being an open box... "IAT'S IAT'S" these people really don't think an older car without a factory IAT gauge didn't have higher readings with a open CAI....
I install that on my Ford Fusion Sport 2017 will it blow my head gasket
No but it will cause your rear cup holders to get warmer in February.
Do you sell the filters individually?
Yes Sir
www.steeda.com/Steeda-Focus-Replacement-Cone-Filter-Element-2012-281-0009
2022 ST compatible
I really like this but it’s so expensive considering the two filters alone is about $100 so I’m paying $250 just for the box
Roasted HD just got mine for $297 plus tax should be on sale on their website
Does nobody answer these Questions
What questions are you talking abut exactly?
Seems like all the questions Tunes for St’s
I cant find the replacement cones on your website. They were their before ive replaced 3 times
Fuckin google man
It's just so hard to justify almost $400 for literally two cone filters and a piece of plastic.
These guys are not real good at responding to questions guess they don't need the extra business from all the edge st guys I have a 2020 edge st found a kit by AFE apparently Steeda dosent need your business
Hi,
We never were able to get our hands on one for R&D so we could not make parts.
Overpriced
I don't know if it's a manufacturing defect or what, but this thing literally does not fit in the spot. The complete waste of money and I called their customer service and that went nowhere fast
Would this kit work in my 2016 ford edge sport