Wiring a Chinese ATV from start to finish with an All New Wiring Harness!
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2024
- In this video I break down a step by step process to install a brand new wiring harness from ground zero. Most of these used Chinese atvs you pick up will have some kind of wiring issue. This video will show you how to install everything needed to make the atv run again!
2 Coil Wiring Harness - amzn.to/2XZdQIx
6 Coil Wiring Harness - amzn.to/33XegiK
Thanks for watching my video! I hope it helped! If you have questions please comment below! See you on the next one ;)
Twice in the past two years I’ve been very frustrated with bench testing an ATV wiring harness. Each time I eventually (re)discovered this video, and within minutes everything was clear and working.
A truly timeless video.
i own a shop, car repair. and three of us could not get past the brake safety wires.. we did a frame up in 15hrs but could not get spark.. you did it for us , thank you Lonnie Ray. we all have you in our pc now
Great video. Previous owner of a quad I now have did all kinds of weird stuff to it so just starting from scratch with the entire wiring harness was the way to go. Just got done and couldn't have done it without this video. There is not a better one on TH-cam for this purpose.
Glad I could help man! Thanks for watching!
Hi great video ! Followed you instructions all worked like you said but have no spark, tried replacing all the components and still nothing. Frustrating, any thoughts??
Have you found the issue? I have the same thing, new harness, new cdi new stator new everything and folowd the video, no spark at all@@dcbhall
I’ve learnt a lot from this wiring harness video, breaking down all the parts into their job lifted the fog!!! Thank you.
Why do people say learnt? I'm just curious. Because it's spelled learned but I see this so much these days.
Because you still learned a lot from this Video that can help you in life
I learnt alot from this video keep up the gd work bro
This video deserves an award. Been binge on these builds and love em. Most us watching these don’t need vid trimmed for time we’ll watch this even if 45 mins
I have watched other videos on wiring my Chinese ATV, 125 cc, but none of them came close to this one. Step by step explanation on how to apply the new hardness and make all connections are explained and easy to follow. I spent months trying to replace my wiring and considered buying a new ATV, until I found this video. "CUDOS" to this presentation and "Ata Boy" to the narrator.
for 2 years ive been trying to find a way to rewire my bike and im 14 so thank you so much for giving me the opportunity to ride my bike again
You bet! Happy to help!
Thank you so much for this video!!!!! I struggled with my bike for days. The key was the safety brake wires. So simple! You da man!
Glad it helped! That safety got me good a couple years ago so I made sure to over explained it!
JfiRjfjgjri
@@PraskaBoysGarage cRe by chance can share a wireing diagram I have a 2013 TaoTao ATA 110-A looks like the same motor
what do you mean safety brake wires? he left the brake wires unplugged in the video and I stumped with what to do with my harness because it says on the diagram for mine that there is a brake safety switch feature that is required to run electric start and idk which connector that is and what to do with it
finally a decent detailed video of wiring , this week i got a 110cc Chinese quad for £80 , Wiring loom was shot and this will help me alot. Prob with these cheap quads though is the woodruff keys don't last and cause damage to the flywheels... Good thing is parts are cheap.
New loom arrived, The main connectors from the stator have a white box yet the loom has single wires. Looks like i'll have to cut them and purchase the push fit ali connectors instead. Prefer the white box though.
I notice you stated pounds, I'm from the UK and finding it difficult to find parts. Have you got any links to suppliers.
Ebay has it all for cheap
Bro the only video on TH-cam I've found that explains this plain and simple great job thanks helped alot
I've been searching for a complete wiring harness install video for the past week for my X15 Super Pocket Bikes I just picked up. And you Sir, by far have surpassed EVERYONE that I've seen trying to give instructions on how and what needs to be connected to each wire. THANK YOU, THANK YOU, THANK YOU!!!! You have no idea how much this video has been appreciated with the information you have given to the public with visual and very simple connection instructions. (I Don't need to look at another video, thanks to you). Thanks Again!!!!
You bet! I actually almost purchased one of those X15 pocket bikes for the channel since they have the same motor but the guy didn't have plastics and I couldn't find replacements anywhere! Thanks for watching, and I'm happy I was able to help!
Praska Boy's Garage I actually finished my wiring harness yesterday because I watched your video and my son and I went riding together. So thanks again for being so informative.
@@shoobiemusic Love it! You bet!
Thank you, an excellent video! Trying to wire up that harness to my quad motor I put into my 1554 motorcycle frame! Worked perfectly! The harness I ordered had no instructions so your video helped me complete it! Thanks so much
Roxanne Hill That’s awesome! I’m glad I was able to help!!!
Thank you so much!!! This helped me greatly, got a bike that needed some work and thought I got screwed and would never see it run or never get my money back... but now I know how to fix it!!! NEW SUBSCRIBER!!!
Glad to hear it! Let me know if you run into any issues!
Thanks to this video I finally just finished my Atc70 / Lifan 125 conversion! I was pulling my hair out trying to get the electric start button to work!
Great, informative, and to the point
Thank you!
Thanks a lot for this video and the rebuild video. The wiring harness does look intimidating for sure! But with this video I was able to tackle the project. Finally just got my sons 110cc running!!
Love to hear it! Glad I was able to help get your boy riding!
Super awesome video… I just inherited a mystery ATV engine and was terrified…because the harness is mangled… your video makes me a little less afraid to tackle it!! Thank you!
Glad it helped! Good luck on your project!
Thank You so much I remember when I asked you about 2 weeks ago to see if you can make a video and you did thanks for being a man of your word. Now I Can finally start working on my Atv!! Thankss!
You bet man! I hope my video helps. I know a lot of people can wrench but hate the wiring part! Thanks for the request!!!
Praska Boy's Garage Yeaa, I seen that the wiring harness comes with a sparkplug do i have to use that one or can I replace my old one?
I always replace it just like I always oil the change. If your old plug is still good and you want to save the new one you can do that!
I knew I messed something up when I wired my bike up, I couldn't figure it the heck out but your video helped so much, thank you sir.
Hey brother awesome video and great detail on how to set up and install. Ladies and gentlemen this video saved my butt it took me 7 days of rewatching but finally fixed 2 AtA 110cc b taotao ATvs. This video and many more of his have been an extraordinary help. My issue was the new wiring harness had wires wired into it backwards which i found reversed them back and got full spark. Thanks for everything and I'm a new fan following and spreading the word.
Thank you for the kind words Ronald! Im glad I could help and if you every have any questions please keep my contact info and reach out!
can you explain what wires were installed incorrectly? I have done everything correctly and still can't get my bike to start without bypassing the wiring harness (solenoid jumpstart) so I'm thinking I may have the same issue as you but I am not very electrically inclined and so I doubt I would be able to spot the mixed up wires without knowing what to look for first and what to compare with
Thanks for responding. I figured it out, took me many hours but I did it. The handle bar switch connections were wired wrong. I had to take the brown and blue wires from the six way and move them to the two way connector to connect them with the red and green wires to starter relay. And then the wires for the kill switch were wired up to connect to the lights. What a mess!! Be careful buying from VMC. Thanks for the video, it really helped me!!!
Man that does sound like a hot mess! Glad you figured it out!
Best wiring instructional video i've found on YT!! I have a 50cc and another 110 cc china quad to do and was going to sell them because i know nothing about wiring until i came across your video!! Now i have the confidence to try now. Thanks very much and of course i subbed!
Al Southern Thank you brother! Good luck on the project and don’t be afraid to ask me questions if you get stuck on something! Thanks for the sub!
How do you tell if it's a yt or what ever idk much about them but I trying figure if I'm getting the right parts for my son 2005 taotao that I pick up for $25 last year and it needs a wiring harness
i gotta say man, after watching this video i figured out the wire harness to my sons quad, thanks man i couldn't have done it without your video. thanks again and keep the videos comin.
Raphy82287 I love it man! That’s why I made this! Happy I could help!
Dude your great at making videos love the detail ,description and quality video . Your amazing
chantel rhine Thank you so much for the kind words! I appreciate your support of the channel!!!
Thank you so much, I had mine all wired but the switch did not work, the two wires for the brake that you touched together was such a help now it all works. Thanks again for that little secret you saved me a lot of time
Your welcome! Happy to help!
Your Awesome, man I've been trying to fig. Out how to hook my son's up with this new harness I got. I'm new to these things so your video here was very helpful now I can get it up an running tomorrow.
Glad I could help! Thanks for watching!
@@PraskaBoysGarage I’ve hooked up the new harness but now I’m not getting spark. Any help?
You are the best !!!! I worked on this bike for months.Now I know how to follow the wiring. THANK YOU
You're welcome!
perfect video. I wish everithing in life was this explanatory.
Lol! Thank you!! I plan to have more future "How To" videos..anything I can do to help someone get back on the road!
Just finished installing a harness and started testing. Hmmm no starter. Yup it was that brake safety switch thanks for saving me hours of aggravation! Great quality videos.
Hahaha I love it! I probably over talk about the brake safety because I was that guy that spent hours and hours trying to figure out why mine wouldn't work only to be the stupid safety! Glad I was able to help!!!
My wire harness doesn’t have any connections for the brake safety switch. What can I connect the switch to so it will start
I like the iconic "Claps hands. Power fist and WoOoh!" moment on your videos haha. I picture myself doing that in the garage, alone and realize i'm alone afterwards and laugh with myself loll. Excellent explanations right there. I'm learning a lot with videos like this and I like it! Thanks again dude!
Lol, man the feeling you get when it first fires up is the best! Thanks for watching brother!
Thanks brother, may God bless you greatly!! This video saved me hourssssss!! I was trying to replace wire for wire from old to new but I got confused so I stripped it down and kept everything you said was needed and surely enough it worked! Haven’t heard my kids atv start up since 2016..but thanks again
Love to hear it man! Glad I was able to help!
Your videos are awesome man...one of the best how to creators on TH-cam imo...clear, concise, and easy to watch...you helped me several times get back on the trail...your passion for what you do is contagious...keep up the great content man!!!
I appreciate that! Thank you so much, for real this comment means a lot! Thank you Daniel!
🎉448 3ww e9 www😅😅wwe we a 5w,8 free😅 9:52 4 ×@@🎉[#×😊😅@= 9:52 ews😅 erstwhile e 😊es 9:52 😅aadi 9:52 😅2w 😊😊www 8😅a😊😊4k knew 😊w😊s 😅😊ws8 wwww wwww 4😅3s4qw😅😅944ss😊wwww😊e w e😊2 3a😊😊🎉3ww 3🎉😅😅😢 9:52 3ww 😅w3ee😅f 9:52 s 9:52 I 2😅w 9:52 e😊s 4wwas ww qw 9:52 ww4d. Eww8 wwwwjwwjrssssewwae83 9:52 i s2ws😅 a 9:52 😅 ww8
9244 swww seeww😊8iwww w 4, 2ww 9:52 9:52 je😅449asas as ej, x wa,94ws😊qr 😅
😂hey hey. I really need help. Bad. Please. I did everything tie-down 2 the 😮ignition and it starts. Smoking. So I shut it off. Just need to know what I did wrong. ??? Please. Man. Can you help me. ???
@@PraskaBoysGarageis there anywhere I could get a starter relay cable that comes directly from the engine?
That little tip about the brake handle and the wires just saved my sanity! It's the small stuff that hangs you up for days lol
Awesome video boy! Nicely explained and demonstrated. Keep it up!
Sunny Chaudary Thank you for the support! I appreciate it!
LMAO boy?
How can you hook up a kill switch mines not working it's a taotao 110cc
Big thanks mate couldn’t get my kids bike going for weeks the local mower shop wanted $450 to fix it ended up ruining one wire harness watched this vid got another and she runs all for $85🙏🏽❤️
That was a great video a lot of people get intimidated by wiring big time and that right there don't get no better than that I do have a good one man Keep On Keepin On bro👍👍👍👍👊👊
Thank you for the kind words!
Diagrama del
For motorcycle 4 wheels 2015 Kazuma
I’m about to watch this just had to pause and say your a brave man, the wiring on these always intimidate me lol
Thanks man! Hope it helped you out!
This video was so good it’s litrally perfect
Thank you so much! Glad you liked it!
Right
I have to agree with that assessment
@@PraskaBoysGarage i have made my own simple ignition at the moment i have the yellow and black wire going straight into the cdi box along with the red/black , blue/white , and my earth (green) . I have fitted a brand new stator and married all the connections together however im left with the green earth from the coil and the green earth from the cdi do i attached these all separatly onto the frame in order to earth them and if i do this based on the setup ive told you about will this give me spark with kickstart only . Also have a brand new coil pack , cdi and spark plug
@@PraskaBoysGaragecould you please let me know the kids and where to buy it
Awesome! Picked up a 110cc chinese quad a few year ago.Wiring was a mess. New carb and wiring kit plus the help of your video. Its now ready for spring.
So where does those 2 cables go? The ones u touch together to make the quad think ur pressing the break?
That's the handbrake switch wires. They cause a closed circuit when holding the brake allowing the start swith to work. So twisting them together tricks it into thinking your holding the brake... but those wires naturally somce these detect if your holding handbrake.. they go up to the brake handle. There's 2 prongs on the back of the brake handle they fit onto.
So tldr.. brake handle..
@scotthope5806 can you just tape the two metal connectors together or is it mandatory to twist the actual wire strands together?
Huge help with my sons ATA 90 couldn’t have done it without this video!! Thank you so much for posting such a great how to
Absolutely! Happy to help!
Great Video!!!! This is exactly what I needed to see. I had some questions on the wiring of these china sport ATVs and you answered them in this Videio. Thank you!! :) Content and your filming quality is admirable. Thank you very much indeed. It really helps us when we are trying to learn the way you illustrate processes.
Terry Spooner Thanks for the positive feedback man! I spent hours trying to find some good information about these Chinese atvs wiring and there just wasn’t much. Sooo about 20 atv builds later I felt confident enough to share what I’ve learned!
@@PraskaBoysGarage will this work on 150cc
Omg this video helped me out so much I bought a Honda fourtrax 250 and the wiring was rusted up and cut up but thanks to the video I redone it all and hoping to finish it up when my carburetor comes in the mail.. thank you very much
Great to hear!
Thanks for this! Really helped me wiring my atv!! Keep it up
MasaFN Glad I was able to help! Thanks for watching!
this is the only video that shows step by step i think. have a chinese atv cobra 110cc i think its the same engine model on all these china atvs. Iam gonna buy a wiring harness becuse of youcuznow i now i feel much more sure about this. Thanks praska boy's garage:)
This comment makes me very happy to hear! I wish someone did this video for me years ago when I was trying to figure it out the hard way! After I got a lot of experience I wanted to share what I’ve learned. Good luck on your project and let me know if you have any questions!
Praska Boy's Garage I have the wiring harness on the ATV but turns out that i had a bad engine): I took it apart and found metal pieces): I bought a new engine and now ii have led underglow on my ATV! You should try out led on your atv’s pretty cool. Thanks again!
That's too bad about the motor! I want to find a motor with low compression so I can do a "how to" rebuild video. Might save some people a few bucks from buying a new one! Thanks for watching!
Thank you for taking the time to make this !
You bet! I plan to do a lot more "how to" style videos for chinese atvs and dirt bikes. I just feel like there isn't enough good content available! If you have any suggestions please let me know!
@@PraskaBoysGarage heyy whats is going wrong if i put this on my 200cc quad
I got a Chinese 90 cc Erin I’m not really sure the engine says sunbird on it and I believe it is a 2 stroke
Model. If you can find a site with a new harness please point the way item no. And site you found it. After seeing your videos you seem like the guy to ask. You are very knowledgeable and I appreciate someone who knows what their doing. Thanks
Really great work and extremely useful. Thanks for doing these.
brettbrownrts Thanks man! I appreciate the support!
i just wanna say this is by far my favorite channel on TH-cam you have everything i need because i just got a 90cc not running chinese atv
Awesome video! Mine is however only clicking when pushing the start button, does that mean a bad starter?
Bad battery my boy
I'm glad I came across your video. Those two wire you had to touch together I would not had knowed about that. I'm doing a 125cc swap into a golf cart or attempting to. And think this is what I needed
Will try this tomorrow thanks
Northy Gtav modz Good luck! Let me know if you have any questions!
much love for making a detailed video. makes it easy to follow. I bought a brand new 110cc atv for my kids' birthday and it had an electrical issue right out of the box. after numerous attempts to get a hold of the customer support from the dealer, I decided to order the wiring harness kit you provided a link for. my atv comes with a gear indicator, not sure where it should plug into (2 wires) so it shows what gear im in.
Hey man thanks for the video! I learned a lot. New subscriber! Would I be able to put one of these harnesses on a Honda 3 wheeler? They don’t make new harnesses no more
Thanks for the sub! I appreciate it! I'm not 100% confident on that mostly because of the stator. You would need to do some research on the factory harness and the wiring diagram to see if the factory stator is compatible. It's entirely possible, but I would look for a used factory harness first on eBay before trying a Chinese harness. Let me know if you try it! I love to know if it works!
I should have asked, how old is the Honda? It might have points for spark and not a cdi box if its to old. If that's the case then it defiantly wouldn't work.
It’s a 83 Honda 200 big red. I’m pretty sure it does have a CDi, is having a hard time finding a good replacement harness. Most have broken wires
I’m quite interested in the Chinese replacement harnesses because it’s a readily available set up. With these old bikes I love it’s so hard to find certain parts as Honda stopped making it. I love vintage stuff
Hey bro thanx for all the info . I have a question about that hose that comes out of air filter. I’ve noticed it goes to a niple coming out of engine can you explain what that is please thank you brother blessings
Yay I was waiting for this video!!!!! 😄😄😄😄
ktm rider Awesome! I hope it helped!
I have a question! Is this the only video on this chinese atv project or there is others videos on it?
I hope in the future that you will do a pit bike it will be awesome!
ktm rider I’m still looked for my next project and hoping to find a really beat up pit bike! The ATV in this video is currently underway, and I will be finishing up soon! It will be a complete build series like my other builds!
Cool, I'm super stoked 😀😀😀👍👍
Thank you so much! My grandson and I are beginning to work on an old Baja 90cc. This was a great clear demonstration of how to rewire the quad, which we plan on doing! New subscriber thanks!
George Horn III Thank you for your support!!! Good luck on the project!
can someone give me a link to the harness that will work on a 2006 baja 90 cc atv
What do you do when you have a twin cylinder with two coils and and one coil connector? 250cc atv trailblazer
I wish I had more information for you but Im not familiar with wiring on those machines. I thought 250 trailblazers were 2 stroke single cylinders?
@@PraskaBoysGarage what could be causing it to blow my fuse every time I try to start
Great video helped me a lot. However I have a Tao Tao 110 and it has two sets of wires coming out where the stator wires come out any idea what the extra set is and where to connect? If you receive this could you text me at 606-273-9065. Thanks
Thank you for this video. I was worried about re doing the wiring. I feel 110% better about wiring everything up. Much appreciated sir. 🙏 👍
i picked up a project lets see how long it takes me hha
TheLargestTurkey Real Good luck man!
@@PraskaBoysGarage thanks man just a few more stripped screws and i got the body off lol
just ordered my wiring harness, all because how you perfectly showed us step by step to install in this video :) hopefully its as easy like your video... fingers crossed
That's awesome! Glad I could help and good luck on your install!!
I put a crf 125 motor in mine 5 speed twist throttle and clutch
This video is exactly what I was looking for, I had just bought a wiring harness that looks just like yours and this guide helped a lot to understand what is what.
Will be going in to an old quad soon, and after this video I feel confident I can pull it off!
Many thanks and great videos, keep it up!
Hey you bet man! Glad you found the channel, let me know if you have any questions on your project!
@@PraskaBoysGarage absolutely 👍
For $30 bucks it would be crazy not to replace wiring, rectifier, CSU box, etc. Like you said, Chinese ATV wiring is notoriously bad, and especially if the guy before you did a hack job.
Being one thats currently working on several of these atv's I'm always looking to youtube and google to try and find information and such. Your videos are just about perfect for me. The length is decent and the content is great. I had one quad which had a carb issue. Easy enough. The next one turned out to be an easy fix but not before removing all the wiring to start fresh. So currently in the rewiring stage. The last quad I just found to have no compression after restoring spark and key/starter issues. Look forward to following you and watching the channel grow.
The one thing I cant seem to find anywhere though. From Google to TH-cam. Is an adequate source for adding the chinese alarms. I know most people don't care for them but my girlfriend would really like to add them to these quads. Any possibility of doing something in that area? Thanks again for what you're doing. Keep it up.
Thanks for the positive feedback! It's always something with these thing, but it's nice because the parts are pretty cheap. I've never done a harness with the alarm kit before because it runs around $75 bucks on eBay and its the exact same kit I install in this video with the addition of the computer and horn. I know those kits come with a wiring diagram to help install though. I'll keep it in mind if I do another ATV but I am currently looking to do a dirt bike next! eBay#123656850930 as a reference.
My issue is that I bought two different remote shut off kits from Amazon. They were only about $15 but came with 0 instruction on how to splice it in to an existing set up. Resources online are scarce but I have found a couple diagrams. Hopefully I can tinker fix it together lol. Well you keep doing what you're doing and the subs will follow. I'm a youtube junkie and wish there was more content like this. I have watched so much of Harvey Spooners videos as they've been one of the better resources for basic wiring. Thanks for the link and good luck with the upcoming project. Looking forward to seeing more.
james s how many wires are on the computer? The one I saw hooked up like this
Red wire --- battery positive
Black wire --- battery negative
Blue wire --- starter
Orange wire--- ignition switch positive
@@GrowYourOwnFun the first kit has, 1 black, 1 orange, 1 red, 1 gray, 1 blue, 1 pink, 2 white to speaker, 1 black to antenna
The second kit has
2 yellow, 1 black, 1 red, 1 blue, 1 orange, 1 white, 1 pink, 2 gray to the speaker, 1 blue antenna.
So they're close to the same but obviously a few differences. I believe the pinks and grays are what tie into the black/white wire for the killswitch. I have found a few diagrams but havent had a chance to really map it out yet.
dude, awesome, i just bought a atv chasis with this motor and i got zero idea where to start wiring this thing, thank you for making this video hahaha awesome im taking the info from a 2019 video LOL
Damn bro literally step by step, thanks for the help
Great video man very thorough. I just got one of those kits for a mini chopper a 110cc mini chopper that I'm redoing and was a little confused but you straightened me right out. It is a pretty simple kit and I pretty much had it figured out but there's a couple hours I wasn't sure about and now I know so I really appreciate it nice job🎉
Thank you,Ijust followed all the steps on your video and got my 110cc motor running.much appreciated
Love to hear that Schaun! Happy to help!
I thank u cause I get ready to go get an Chinese quad from the junk yard and all your videos help me
Gonna start on mine tomorrow. I might have to ask u some questions tomorrow. But this video is very helpful.
Lent Jones Right on man! Good luck, and I’m here to help anyway I can!
Great video. You are a quality Tradesman. Your suggestion of replacing everything from ground Zero proves that. Why stuff around testing each component. Nga mihi.
Thank you so much I didn't know about the brake safety and that's what has stopped me from starting after rewiring
I have an ATV or 125 that’s been sitting in a garage not really an ATV person more of a
I took a video of myself years ago when I first figured that out. Spent the entire day with several harnesses putting them on and off multiple times. Probably why I over explain it in all my videos!
Awesome video. Made something tricky, so easy! Worked first time. Don't know why they don't put a simple diagram in with their wiring kits!
auratech96 Thank you! I remember my first timing doing it and it was a disaster. I turned to TH-cam and found nothing helpful. So about 30 wiring kits later I decided to put it on film to help out others!
Excellent video that helped out tremendously. I’m not very good at wiring but I can follow visual instructions like it’s no one‘s business. Lol There’s not too many good wiring videos that I found but this one got the job done thank you.!!!😃😃😃😃
Man all vendors should pay you to use the link to this so well explained ! You rock sold a 110cc got a massive 125cc and previous owner did not watch this so many grounds to hot it melted so ordering a new kit and will watch this again . There is a sensor or something near sprocket ⚙️ that has wires and i have no idea were it goes or what its for that i didnt see you plug in?
The links are Amazon affiliate in the description so I get a very small kick back from them but that's it! I've worked with VMC Chinese parts in the past and they are also great! The wires you're talking about are for gear light indicators. These aftermarket harnesses do no have a hook up for them and I haven't found one that offers it yet.
Thank you for your really clear explanation Iv watched numerous wiring vids and they just confused me got it 1st time with yours keep up these vids man born natural aha
Thanks for the video. I’m doing this to one now and wasn’t sure what a few of those safety brake wires were. Hope mine has spark after this.
Thank you,
Really helpful I was happy listening to that engine turning on.
I had lots of trouble trying to get my atv to that point.
Thanks again
Me and my Dad thanks you for this! It helped us out a lot.
Hey you bet! Happy to help!
I'm about to tackle a new harness on my 150cc. This will help tremendously! Thanks!
Rs M Good luck! The 150 is very similar!
You did a very good job on that four-wheeler man
Thank you! It was a cool project and was one I will remember for a long time!
You bloody legend i never would of thought of the brake wires cant thank you enough 👍
You bet! Happy to help!
Thank you so much for this video! Kudos to you for dealing with these insanity wiring harnesses. Ours when we got the quad for $40 was totally mismatched and all rigged up. Appreciate this.
You bet! Happy to help!
Same with mine all Jerry rigged
I just watched your video because I just picked one up yesterday and I ordered all the wires and they will be here in a few days but I really appreciate it and if you can get back to me in case I have any questions that would be great thank you
You bet man! Good luck on the project and let me know if you run into any issues. Message me here or you can always email me directly!
Absolutely brilliant video mate 👏 I'm just about to attempt rewiring a Chinese off road buggy and that was just the video I was looking for. Very well explained 👍
Thank you for breaking that all down I put it back together again
Richard Davis-El absolutely! Glad I could help!
great video , my harness was smoked and hacked up ! The kid who had it last spliced and cut to run,also by passed fuse. stright power !!!
Oh man, there is a fuse for a reason! Well I’m glad you got ahold of it and are making it right!!!
Excellent video, Totally. Finally a good explanation on how to connect the chinese wire harness Perfect
Thanks for watching! Glad I could help!
Man love this!!!! Just picked one up for cheap and this is what I needed!!!!!
That's awesome! Good luck on your project!
Im so glad i found this. I think i might have watched it once before thow i cant remember. Awesome job and thank you so much again
Thank you so much for the video! Great job! I will be starting on my ATV project tomorrow hopefully I get it to run.
Thank you for the positive feedback and Good luck on your project!
Thank you! This was a big help. When I picked up my 50cc it was already taken apart.
You bet! Good luck on your wiring and if you have any questions let me know!
The 2 prong plug on the switch was my trouble spot. This answered my questions. I now think I have a bad relay on my break because it won’t start with the kill wires hooked up. I have to jump them together. When I test the relay it show as normally closed and when I compress the break it goes open. I believe it should test as normally open for this to work. Turns out the 50cc is a 70cc! Nice surprise
Thanks. Your video help me to figure out if my old magneto was compatible with the need harness!
Awesome! Glad I could help!
But other than that issue this video has been a huge help an helped me out an saved me tons of money
Happy to hear the video helped! Thanks for watching!
Thank you so much for this vid my quad broke and not getting spark I was dreading replacing the harness but feel bit more confident now 🙏🙏🙏🙏🙏👌🏻👌🏻👌🏻
Glad I could help!
Thank you so much, this helped me with my first "project" I'm working on, this was actually very helpful
You're very welcome!
Thank you for your time and the very step by step detailed video.you made it more simple then it looks and sounds.i appreciate you.
Again another brilliant video and well explained with lots of detail.
Cheers from Ireland.
Thank you Jimmy!
Fantastic video! quick but very detailed. Just what I needed to handle the job.
Glad it helped!
Wiring my 1998 Arctic Cat 500cc 4x4 for the first time. Thank you so much for the tips.
You bet! Thanks for watching!