I UPGRADED MY WIFE'S GUITAR AMP RIG!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- If you are interested in any of the gear I showed in this video, check out the links below! Thanks again to Sweetwater for sponsoring this video!
Hughes and Kettner Tubemeister 212: sweetwater.sjv...
Seymour Duncan Powerstage 200: sweetwater.sjv...
Gator Large Pedalboard: sweetwater.sjv...
Rode Podmic: imp.i114863.ne...
Rode PSA Boom Arm: imp.i114863.ne...
Rode Wireless GO II Lav System: imp.i114863.ne...
Get tickets to my wife's show: thecobalt.ca/e...
Follow Dean on IG: @dean_lamb_
Follow Claine on IG: @Claines_world
Subscribe to Claine on TH-cam: / @clainesworld
Follow Claine on Twitch: twitch.tv/claines_world
A few things I learned from building this rig:
1. The cabinet running at 16ohms may not give as much headroom as you'd like, I think if I were to rebuild it I'd go with an 8ohm cab, or something that can run in stereo so I can pump a bit more wattage into the cabinet.
2. The wheels added to the TM212 make it wayyyy easier to transport, but it isn't a super deep cabinet. So the higher centre of gravity makes it a bit tippy. I think a deeper cabinet may provide more stability.
That being said, no rig is ever "complete," and I think this is a great start for my wife on her own full guitar rig, and it'll make gigging/touring so easy. I think this is still a great combination, especially while playing locally when you have to load all your gear into the trunk of someone's car. You really can't beat the weight and portability of this setup.
Please let me know what rig you would build in the comments!
Can you rewire the cabinet to 4 ohms (hoping they're 8 ohm drivers) - looks like the amp has good 4 ohm output.
What if you built a cab, with wheels of course, that was tall and deep enough to mount a full size amp, like a rectifier or peavey xxx or 5150 or whatever, just a full size amp, and mount it inside the bottom of the cab and have your 2x12 or 2x10 above the amp. Basically, it would be a half cab, but the weight would be on the bottom and the speakers on top. Just one half cab. Amp inside. With wheels. And handles. Ya know?
Assuming that cab has 2 Vintage 30, 8 ohm drivers, they must be wired in series to run at 16 ohms. You should be able to wire them in parallel instead to make it run as a 4 ohm load. Hopefully that's a nice easy fix.
@@chrisrohlfsTim allen: so I rewired it!
It also looks like you could move the casters out front to back another 1/2" or so each so you have a wider footprint. Unfortunately, this would lead to more holes.
We’ve missed you, you bald boi ❤️
You’ve inspired me to do this for my wife ... she doesn’t play guitar 😏
Or exist 😃
You can tell how excited you were to build this for her. Super awesome!
I love Dean and no judgement but he looks/acts high on coke or something in the first few minutes.
Claire deadlifting the cab like CT Fletcher was fucking hysterical 😂🤣
I'm seriously learning so much sbout amps from the comments on this video. Thanks for sharing your suggestions and recommendations! :)
i wish i had money so i could get me all that gear😥
Awwww seeing Claire so happy with the gear after all the effort you put into it made me believe in love again :) LOVE THROUGH METAL
excellent. at some point I would recommend you add some lock washers so those bolts stay tight
I was waiting for this comment
Those who upgrade rigs together. Stay together. Hope all is going swell.
Those who upgrade rigs together, smoke cigs together :)
It’s so fucking cute how excited you were to show Claire ❤
yeah so wholesome :)
holy shit! bro i know her, she gave me music lessons like 3 years ago at a place called “Long and Mcquade” i immediately recognised her face. and i remember him because my name is Dean too! so crazy.
Guys love helping their ladies.
That Gator pedalboard looks slick and great choices for the power amp and cab. The one thing that you may want to change is the speakers in the cab. If she's using the cab sims in the Pod, then the V30s are coloring the already colored sound. Using some FRLR speakers (Celestion has an awesome one) will give a flat response and still feel like a guitar speaker - designed specifically for amp modelers.
She can just disable the cab Sims tho
She was literally using a cab with V30’s before. Probably not going to be a problem.
Never said it was a problem, just something to be aware of and might be worth experimenting with.
Which is why i started with "If she's using the cab sims" :)
You guys are definite couple goals
That's cool as hell having a wife that plays guitar! She's a keeper!
Lol you said “my floor might be out of tune” wonderful.
i plan on using sweetwater to order my first 8 string next year. never thought id buy one honestly but your music inspired me to go for it and learn some of Archspires songs!
Both of you guys have some really sick looking tattoos
It's great to know that Claire will be all set to play those ABBA covers!! YAY!!
Sweetwater is a very good company. I remember the level of customer service I got from them when I purchased a PRS McCarty Ten-Top. Been a lifelong customer and will continue to do so.
Did Sweetwater send you candy with your stuff? That's the best part.
Looks good, big fan but You might think about putting some biship tape under those coasters or maybe some cauck around the bolt threads to make sure they are sealed airtight otherwise those holes you drilled all the way thru the cab can really effect the tone.
Very close to my live rig, Powerstage 200, helix LT and EVH 2x12, ive played that rig in venues of all sizes, you chose coreect Dean.
0:14 under Clare's name
"Pod go to the polls".
Clever.
Haha, its like if 2016 never left us.
Thats a time capsule.
Pro tip for someone who's had to load his 212 countless places. Squat and bear hug it from the front instead of from the back. It'll be less awkward. The weight tends to be a little bit more forward on those cabs, and the open back leaves lots of grabbing room. The top handle on those things tend to be useless in my opinion.
Excellent cab choice sir , that what's shaping the final tone. I've done live setup for professional artist using that signal chain. So much clarity , sits in the live mix excellently . Now he can hear his voice better and hear the chords clearer.
Personally dean I was in a deathcore band called risen from hells ashes and I at first had a rocktron piranha pre amp running into a cheap amp tube head that I switched to a Marshall JVM and still used my rocktron piranha
Dean Lamb's rig building is an awe-inspiring masterpiece of sonic craftsmanship. The way he seamlessly integrated the Seymour Duncan Powerstage 200 to elevate the already incredible tones of the Hughes and Kettner Tubemeister 212 cabinet showcases his keen understanding of sonic architecture. Adding wheels to the cabinet not only demonstrates his practicality but also his attention to detail in ensuring both mobility and aesthetics.
The inclusion of the Line 6 Pod into the setup further highlights Dean's commitment to sonic versatility, allowing him to effortlessly explore a spectrum of tones. His rig is a testament to his dedication, technical prowess, and artistic sensibility. Dean Lamb's rig isn't just a collection of equipment; it's a testament to his musical vision and technical finesse, resulting in a sound that's nothing short of astonishing.
Maybe bolt some handles on the sides to get a better grip?
That old set up was not broke. Modeler through a Mesa Stereo power amp and Mesa 2x12.
Carrying that thing would kill me too. You know. If I was a talented working musician and had to take my gear anywhere...
Thanks for the update in the comments about what worked and did not. There may be less tipsy options for the casters? Good job on taking the time to bolting them down on the inside of the cab.
The editing had some great small touches, like thePimp My Ride vibes, filming Claire knocking at the door the well-paced background music that you often see on popular TH-cam channels. Coming from you, it actually made me laugh!
Because I'm not entirely sure if you did it because you wanted a quality video, or because you wanted to joke/parody it a bit.
I'm assuming it's a bit of both but either way good stuff!
mmh, with caster , you want to get them close to the edges, at least sideways, cause with the swivel, they get smaller footprint (due to the offset of swivel ~~), and its easy to tip the box over, particular for something that is thin and tall.
Brother, if you don't put the nut on the outside of the caster, you should lock tite them. The vibration is going to loosen them over time.
Love the different content coming from the 2 of you ♡♡♡ keep it up 🤘🏻🙌🏻👍🏻
This is a paid advert.
@@TheLotusMachine doesn't matter to me, Claine getting sorted out.
Great call on the powerstage! I use a PS170 to power my kemper and it sounds great and the eq really helps shape my tone exactly how I want.
I have a Gator guitar case that's specifically made for traveling since I need something heavy duty for when I have to evacuate for hurricanes and I couldn't be happier with it. That thing is almost 10 years old and it doesn't even have a scratch on it. Good call on going with anything Gator; they make decent equipment.
While not cheap, you guys can pull those heavy V30's out of the cab and replace with some neodymium magnet speakers. They weigh a fraction of what these weigh and sound every bit as good.
The Pod GO line out is a balanced output (even though it's a 1/4"). I use.a 1/4" to XLR cable with mine.
I believe the soundtrack is as important as the video and you did a bang up job curating the tunes. I thoroughly enjoyed noodling over top of them!
Naaaaah
I want a wife that I can discuss live rigs with! My 2 cents-Matrix poweramp-light as a feather and can clear a room. Worth every penny. Grew up hauling a full stack and a 12 space rack with a 1000 pound power amp. Im an old man now down to a 4 space gator wheelie case . Fractal into Matrix into 2 old ADA 2x12 slants (16ohm v30s-so 8 per cab). Small stage I only need 1 cab -carried in my right hand and pull the rack handle with left hand! Fractal is the heaviest component in my rig. Love small rigs! Tried some neo mag drivers in the cabs to shave off more weight but went back to V30's. Great to see a new vid from you two pop up in my feed-cheers!
Good job on the casters you remembered to predrill I always forget that when putting shit together
It's just so nice seeing a couple melt faces together
I still have my POD 2.0, my POD X3 Live and now im rocking a POD HD 500
Best gear on budget for sure
Getting the tubes tied made me LOL.
Could’ve looked into the Laney FRFR cab. I’m wanting to get one for simplicity myself. I also use the pod go and it would plug straight into the cab and it has a DI out! Looks to be solid, but I’ve personally never used it.
Speaking about upgrades, will Archspire re-release the "All Shall Align" album? 👀
Missed and Love both of you!!!Nothing but great things coming in the future!!!GodBless
That Mesa power amp is heavy af but it is LEGENDARY
Very nice build! I have been carrying to shows for many years already only a pedalboard that has the Powerstage 170, Mooer GE200 and a Polytune mini tuner. Zero problems and great sound. Never gonna carry a a tubehead along anymore unless I have a roadie haha.
Those powerstages rule! Toured Europe with the bigger one and ran 2 rigs through it. Solid as hell every night
I love the excitement to do this for claine. It's really cool of you and sweetwater to do this as well it turned out really well.
I think all speaker cabinets should just have castors that are removable if for some odd reason you don't want them on
Couple goals.
dude the Ikea ruler is so real. I recently made a very important measurement for an upcoming move and realized the only thing that wasn't already in storage was a 6" purple transparent ruler that I'm pretty sure belonged to my sister in like 3rd grade
i use the power stage 200 into a 2x12 with v30's, and i use a helix lt. best tour rig i've ever had!
FYI KSR Power amps are sick are very compact. Very underrated if anyone is in the market for a power amp.
The rig I use for my band live is very similar. I use a Helix LT with an Acoustic B300HD bass head as a power amp and a DV Mark Vertical 2x12 cab.
For the Amp, I plug into the input rather than the FX loop because the amp is pretty transparent and the 5 band EQ comes in handy when a room sounds weird, but I don't want to tweak Helix patches. The Amp is only $200 and is very loud. I don't have to run it past half for most shows and we have a very loud drummer.
In regards to the cab, the Neodymium speakers and fairly light construction make it SUPER light (about 26 lbs). It also comes in a horizontal layout if that's preferred.
This kind of rig is really the way to go when compactness, simplicity, and price are major concerns. The SD Powerstage is a bit pricy, so I strongly recommend the B300HD as a cheaper alternative.
I love the content BTW! I saw Archspire last year in Portland OR and you guys were great!
Same, but I just use a line 6 frfr cab. Power amp is built in already. I'd have a smaller rig if I wasn't obsessed with pedals. I run a pretty big pedal board into my helix
Did you consider going with an FRFR cab instead of doing the separate power amp/cab?
Very nice work handyman Dean.
Also… Pobody’s Nerfect Podcast with Clean and Daire when?
Line6 makes a powered cabinet to use with Pod Go and helix.
That riff she played was awesome!
You should ask people to send in videos of their current rigs and you could do the whole sweetwater "what I would do’ bit in reply to them, as this was pretty cool.
"I hate feeling like people have to carry things for me" dean you got yourself a winner.
Hey fullas, lovin it , very passionate about the 17th of October in Perth, fan boy shit, but Tuesday is a gonna be total awesomeness, ps bring Claine
Her new rig is sick man. Gives me some ideas on getting my new rig up. By the way, absolutely LOVE Misyrion!
You should have swapped the mesa cab to neodymium magnet speakers. They are a 1/4 of the weight and you still keep the killer sound of the mesa cab. You could have dropped cab weight by 40-50% with neo speakers.
I can’t believe you had Sweetwater sponsor this and she still kept that pod go. But nice job on that Duncan. I run my quad cortex through that. It’s amazing
If you already own a pod go, there's little reason to upgrade it. It's already pretty great.
@@Trentstone121I could think of many
This was a really really cool video! I hope the wifey loves the rig even more as time goes on.
I am actually super curious to hear more of it. Future 4LODM videos, perhaps? 🤷
Also.... does her band ever tour around the Midwest in the US? It would be cool to go to a show.
8:06 I instinctively started finger drumming a blast beat at the drop here
Great choices all around. The Ps170/200's are amazing.
Using pliers to tighten bolts? Good way to round the heads.
You mentioned tape measures, reminded me of a cool trick.
Take the blade of the tape and fold it over to what the year would be 124 for 2024. Then look back at the year you were born, the other side of the tape will show your age for this year. So me for example 84 and 40.
Awesome new setup of the Rig. Coolio vid. 🤘🏻😎🤘🏻
I use one of those Gator pedalboard the power supply bracket is amazing!
Awesome video and congratulations on the new rig!!! quick suggestion: if you haven’t thought of it already, maybe replace the Celestion 30s with two Celestion neo cream back speakers….. or any other neo type speaker? I have the neo celestion cream back, 60 W and those are usually about 4 pounds lighter than the usual speaker. Cheers!!! 😀
So meticulous. Mad respect cause I don't get difficult things!
mesa poweramps are savage heavy, but they sound WAY better than any class D poweramp
Which is exactly why I'll never sell my poweramp.
I have the PowerStage 170 with a 2x12 and it blows me away how loud it is!
It surprised me when you went with the HK cab. Knowing that you wanted a lightweight 2x12, I was assuming from the get-go that you would have gone with an EVH 2x12. The EVH 2x12 seems to be an extremely popular option in a lightweight 2x12. So much so that it just automatically pops into my head when thinking lightweight 2x12.
Aww how sweet you guys share hobbies
A pair of FRFR, but that would have been a very short video.
When I seen how far in you mounted the casters, I was immediately concerned with how easily it may tip forward/backward. How stable is it?
This was very sweet. You were both so smiley the whole time, like lovers of loving love.
So wholesome.
Oh man. Wish you’d have gone with locking casters. As a TM I’d have wild anxiety that it would start walking across the stage during a set
Awesome gifts Dean! Wow for real 😁
Awesome rig Dean. You both 🤘🏼.
The tone is in the Hands
Long and McQuade really dropping the ball by not just sponsoring all these canadian channels
For real.
Also how do they not have a pile of V30 loaded Traynor 2x12 cabs with a vintage silver grill cloth option and a modern black grill cloth option so all of Canada can be running those instead of importing cabs from Sweetwater and Harley Benton cabs from Europe. Seems like a no brainer.
Was thinking same thing
Cool video lamb guy, thoroughly enjoyed.
even a 1x12 is usually plenty tbh, as logn as youre micing cab and have IEMs
Loved this, very sweet. Also, SICK tees man. What's the first black shirt you have on (long sleeves with what looks like a mage from FF? around 3 min in)? Entheos tee is hawt.
You show in austria was amazing, you should go there more often😆
Actually this video is really useful, keeping out the preconceived ideas about the fact that you absolutely need a pair of 4x12 to be loud enough to play in a mid-size venue.
I've literally used a 1x12 60 watt DOD amp for most of my gigs. 4x12 is fun, but unnecessary.
Nice! Gotta come watch the band sometime at the cobalt!
Boss katana mk2 head perfect for transporting
I would upgrade the speaker wire inside that cab. Makes a ton of difference 👍
What's up Dean and Claire!! Thanks for the vid!
Very sweet setup!!
Yeah the one downfall with the PS200, paired with a 16ohm cab it provides 50w. The 200 is when paired with a 4ohm cab
I'm glad the liftmus test was successful.
This was super fun to watch!