CZ 457 MTR MATCH AMMO BATTLE, PART 7: SK STANDARD PLUS ACCURACY TESTING AT 50 YARDS
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- CZ 457 VARMINT MTR 22LR RIFLE Accuracy Testing
Watch Part 1 here: • CZ 457 MTR; MATCH AMMO...
Watch Part 2 here: • CZ 457 MTR; MATCH AMMO...
Watch Part 3 here: • CZ 457 MTR MATCH AMMO ...
Watch Part 4 here: • CZ 457 MTR MATCH AMMO ...
Watch Part 5 here: • CZ 457 MTR MATCH AMMO ...
Watch Part 6 here: • CZ 457 MTR MATCH AMMO ...
Watch Lilja Headspace accuracy testing video here: • .22LR HEADSPACE: How m...
Video on how to install and headspace the Lilja here: • Video
In this video we take the CZ 457 Varmint MTR rifle I personally use for PRS22 competition. We show accuracy out at 50 yards on paper with SK Standard Plus Ammunition and talk about the rifle based on my personal experience. We shoot the SK Standard Plus in our 50 yard stock match ammo test with a stock CZ 457 MTR.
Benefits to the 457 MTR over a traditional 457 rifle is the Turkish walnut stock with plastic pillars as well as the very accurate match chamber barrel.
That's similar to my Schultz and Larson chamber, barrel etc. I had good luck with federal gold match. CCI standard did very well also.
Why is the Victor Titan cheek rest no longer on this rifle? I looked on the previous video, but didn't see the reason. Love this ammo comparison series! Thanks!
I moved to open class and wasnt using the factory stock anymore. The titan was on the mannners stock I was using in competition at this point
Thanks for the great work you do. Love all the videos.
Thanks Jeff
Nice shooting Josh
Nice groups! I just got sent a brick of that stuff from Jdelta22 to try in my 597. Hoping for some decent results. Hopefully more consistent than CCI Standard Velocity!
My MTR Manners shoots Lapua OSP and RWS R50, under .041 consistently, and off an Atlas bipod.
Thanks for posting the leaderboard at the end. I can't remember who ranks where without it. 👍
Haha.......honestly.......me either
My results mirror your smallest group in my CZ 457 Varmint MTR. I wish I could find some for 6 per box - I’ve had to pay a lot more than that but it consistently outperforms Center-X, Midas+, X-Act & Tenex in my rifle. The Ruger prefers Center-X and R50
Nice. Well cant be mad about finding ammo that works really well and its affordable
I bought it today for 6.50€ per box in Slovakia 🇸🇰
I have found that shooting off a bipod is not the best for shooting groups. I use a slightly modified Caldwell Rock BR along with a Protektor rear bag. 100 yds is the real test of accuracy. A windless day is a must for best groups. OTOH a friend of mine is the importer of Anschutz rifles and RWS ammo. His building has a 100 yd indoor range.
Thanks for the video. Standard Plus is all my buddy shoots.
Yeah for the money its good stuff
Thanks again Josh. More data to work with.
Awesome
Nice shooting as always!
Thank you sir
Thank you.
Good day dude! I'm a filipino guy planning to swith from air rifles to 22lr rifle, here in our country not all quality imported 22 rifles and ammos are available in the market, Ruger 1022 and CZ 457 varmint are some you can get. I found CZ matches my need and planning to buy soon, may i asked you to make a video testing with Armscor 22lr ammo? If it is available there, imported ammos here is hard to find and cost a lot. Armscor firearms and ammos are locally made here aside from its cheap price. Thank you and more power.
Am I first am I first on the comment like hahahhaha another great video , the sk line seams to run well in the mtr series of cz rifles . Thanks for the post brother
You are first
Would love to see you do a review on the Lithgow 101 .22 if you can get your hands on one.
Its on the collection list, just got to find one first
Why NO Lefthanded MTR's CZ???
Willie B from Tennessee
Nice shooting. Just a thing i tried i got hold of a bore scope and found 22lrs have a buildup of carbon right were the bullet leaves the shell and it can be hard to remove. The barrel i clean maybe every 500 rounds but this build up can happen in 100 round and haven't had that much of a problem with cold bore shoots now in my cz lrp 😀
I have an update cleaning video coming soon actually.
I spend a lot of time busting up carbon rings and bore scoping barrels over here 😁
@@PursuitofAccuracy All good i was just saying it is something that i found with my 22lr lrp and i don't have that cold bore first shoot flyer anymore 🙂
Can you do a video using any match ammo and maybe federal bulk high velocity out of the same gun. Just to show the difference of quality ammo. Please. Watching from Maine
Will see what i have laying around for bulk ammo. But yeah i can definitely do that
Nice shooting all round, thanksfor doing this extensive review. Question are the spread of each group measured centre to centre or outside to outside. Thanks,johnu
Center to center
my CZ 452 varmint even today 5 holes in 1.20 cm. with standard Sk with 28 ° temperature. It remains clear that the weapon has been accurate in all its parts, beding, trigger, pillar etc ... front support only at mt. 50 away.
Nice, sounds like a nice accurate rifle
Josh to prove I am on to something here try shooting these targets from right to left I think targets 5 4 and probably 3 will not be as good as 2 and 1 good shooting brother
Beagleman
Does anybody know what the BC is for SK standard plus 40 grain?
I can't find it anywhere on the internet or on their website. Most likely not looking in the right place
I see you have the CZ first shot flyer issue like I’ve asked you about previously. SK ammo seems to do it the worst through my MTR.
The cold bore is pretty much with every rimfire and ammo i have shot
@@PursuitofAccuracy i have same in my 22 which is not good for hunting where you only get 1 shot at a bird! 17 hmr does not seem to suffer cold bore as much for some reason?
Probably has something to do with the residual wax/grease getting up to temp inside the barrel.
Thanks for the video. I shoot SK Standard Plus for practice only and getting similar results to you. I use SK Rifle Match for competition. What type of rail is that under your forend? I would love one of them on my MTR
Thats a 12" universal arca swiss rail from area 419.
@@PursuitofAccuracy Thanks Josh. I'm going to get one. I need to find a supplier in the UK. I need it badly. Is it easy to fit? Thanks
@@kal3934 you have to drill the stock but its not hard. It comes with the hardware to do it
@@PursuitofAccuracy No problem I can do that. Do I drill all the way through the stock until it comes out the other end or just drill into the stock only. Thanks
@@kal3934 so when you get the rail use your existing bipod stud as the 1st hole. Then mark locations for next two.
You will want to drill a hole all the way through the size of the screw. On the barrel channel side you will want to drill a shallow hole the size of the nut.
Its not terribly hard just make sure your drilling straight and check your locations etc several times before drilling
Why no Cheek rest
Go-to :45
Is the bipod as steady as a tripod rest? Good shooting BTW.
The bipod and rear bag setup is extremely stable
? Do you measure the rim thickness. Or just weigh the bullets. Nice shooting.
I open the box and load the mags. I dont do any sorting or weighing
My 457 varmint likes the standard.
I have a cz457 that will shoot 3/8 in groups at 50yrds with standard plus and two different cz457 that shoot the center x the best and I never have a cold bore shot out of these rifles and they all have the barrels that come on them match chamber and barrel.
Beagleman
Sk standard plus shooting the same as eley tennex in your rifle. For less than half the price!
Yeah works out that way sometimes haha
Eley tenex sucks out of my VPT
well sir now im in a holding pattern just purchased a titan for my MTR an dont have a clue about what you are talking about what happened ?watched your last episode didnt mention anything on the titan ...please let us know whats up dont want to drill two holes in my stock just to find out its not up to your standards an you have been using it for years...standing by for clarification
Bill
The cheek riser is still on the mtr to this day. You can heat it with a heat gun and temporarily place it on the stock to see if you like it first. One size doesn't fit all in the world of firearms
@@PursuitofAccuracy thanku Josh for clearing that up an getting back so fast appreciate it take care my man ...
Then I don't feel too bad with my Winchester 9422 lever action shooting 10mm (.39") at 50 meter (55 yard) with the SK Standard. th-cam.com/users/shortsDHO66fc_Iwo
Good reviews, I can do without the dramatic music.
Its gone, your welcome 🤣🤣
@@PursuitofAccuracy I like the intro music.
Hey if you don't clear the grease off, weight it and length gauge it Your wasting your time! cheers
I think thats crazy to have to sort match ammo. Ive got unsorted ammo in my competition cz that shoots .1 and .2
I dont know who has the time for all that sorting and weighing lol
@@PursuitofAccuracy I weight Eley Match because I want to get the every last out of it!