I wish I had wheel stand lite 2.0 when I bought wheel stand. I'm currently using wheel stand lite 1.0. It used to swing left and right a lot. I bolted up an angle iron between base frame and shifter plate, and added a 3rd party chair cradle. Now it's much secure than original.
@@seebarry4068 Thanks for your recommendation. I'll have a look it when I need it. Why I bought NLR Wheel Stand Lite is because I need something fitting under my desk, getting it as close as possible to my monitor. Push it away when I'm not racing.
@@jermz1 Congrats! Definitely tighten up thus bolts on the uprights. The stand is still in good shape after resting it on the cradle. I still have the g29 on it so maybe something heavier could cause issues but it's still holding strong for me
lol I went through the rabbit hole 🕳️ triple monitor took the corner of my room routed cables everywhere the whole nine yards my next upgrade would have been adding motion. Woke up one day and thought what if I put up for sale as I wasn’t using it because of configuration and making everything work all together always took most of my time rather than just hoping on. Well it sold for a good bit of money. Now I’m here looking at something cheap that I could use for casual play. Hahha 😅
Hey, I see someone asked about the dimensions of the wheel stand when folded. I’m interested in the width and length as I’m comparing it to the apex omega. You provided the width and height, do you have the length measurement too? That would be without any wheel or pedals mounted. Thanks!
Hey sorry for not getting back sooner. I'm assuming you mean how much space it'll take on the floor? I can double check but with the floor cradle probably about 80cm/32in and about 60cm/24in without. I can get better measurements a little later.
@@btotheboy it's from a company called Autonomous. I've had it for a while and I think there are a ton more options out there now. My only gripe is I wish the arms folded up vs having to be taken off if you want them out of the way.
@@BrandonJamesComposer as I mentioned in the review, it's a problem if you don't tighten the bolts for the uprights. After doing that it's not noticable.
Hi, it's about 55cm wide with the shifter plate. around 70cm tall without the chair cradle and around 95cm with the chair cradle. That doesn't include the wheel which will obviously depend on what you have.
@@elgatoconlapipahi! I’m also curious about the depth when folded. I know this also depends on the steering base + wheel you have but it will give a rough idea of the space needed.
@@tomvdlouw the stand itself is about 4-5 in or 10-14 cm. But with pedals and wheel its obviously thicker. Overall pretty easy to put up against the wall on between some furniture.
"missing charm of those early days" sure buddy is called being broke, im sure anyone with those cheap setup and lack of space would give anything to have a full quality cockpit
I’m totally new to the racing rig community, but this review solidified my purchase. Thanks man.
Congrats! I hope you enjoy it!
Lovely modern design on this newer model. Looks a lot cleaner than the old model.
Great video!
Thanks for such a detailed review!
I wish I had wheel stand lite 2.0 when I bought wheel stand. I'm currently using wheel stand lite 1.0. It used to swing left and right a lot. I bolted up an angle iron between base frame and shifter plate, and added a 3rd party chair cradle. Now it's much secure than original.
Have a look at a VEVOR WS-P02. It's what I use personally. Heavy duty 20kg wheelstand, for a third of the price of this.
@@seebarry4068 Thanks for your recommendation. I'll have a look it when I need it. Why I bought NLR Wheel Stand Lite is because I need something fitting under my desk, getting it as close as possible to my monitor. Push it away when I'm not racing.
but do you have to tight it down those screws you mentioned each time you unfold it?
@@zishenye3444 not every time but they can work loose so probably good to have the hex wrench handy.
Thanks for the review. I just got the same stand. Did you find any issues after standing it up on the wheel cradle after some time?
@@jermz1 Congrats! Definitely tighten up thus bolts on the uprights. The stand is still in good shape after resting it on the cradle. I still have the g29 on it so maybe something heavier could cause issues but it's still holding strong for me
may I ask the how wide is the cradle of chair wheel? say how many cm? thanks!!
47.5 cm or 18 3/4 in
Compared to the playseat challenge, is it more solid?
I haven't used the challenge so hard to say but I've heard mixed takes on the folding seat rigs.
lol I went through the rabbit hole 🕳️ triple monitor took the corner of my room routed cables everywhere the whole nine yards my next upgrade would have been adding motion. Woke up one day and thought what if I put up for sale as I wasn’t using it because of configuration and making everything work all together always took most of my time rather than just hoping on. Well it sold for a good bit of money. Now I’m here looking at something cheap that I could use for casual play. Hahha 😅
@@raulmartinezLoveTranceLA lol sometimes the simple life is nice
Hey, I see someone asked about the dimensions of the wheel stand when folded. I’m interested in the width and length as I’m comparing it to the apex omega. You provided the width and height, do you have the length measurement too? That would be without any wheel or pedals mounted. Thanks!
Hey sorry for not getting back sooner. I'm assuming you mean how much space it'll take on the floor? I can double check but with the floor cradle probably about 80cm/32in and about 60cm/24in without. I can get better measurements a little later.
Awesome video - I was wondering what ergo chair you're using?
@@btotheboy it's from a company called Autonomous. I've had it for a while and I think there are a ton more options out there now. My only gripe is I wish the arms folded up vs having to be taken off if you want them out of the way.
Does the wheel move around much? A few reviews have mentioned it moves quite a lot backwards and forwards - was this an issue in game?
@@BrandonJamesComposer as I mentioned in the review, it's a problem if you don't tighten the bolts for the uprights. After doing that it's not noticable.
VEVOR WS-P02 is better than this for much less. It's more a copy of the wheelstand pro. Also foldable.
Hello, could you indicate what measurements it has when folded?
Hi, it's about 55cm wide with the shifter plate. around 70cm tall without the chair cradle and around 95cm with the chair cradle. That doesn't include the wheel which will obviously depend on what you have.
@@elgatoconlapipa thank you👍👍
@@elgatoconlapipahi! I’m also curious about the depth when folded. I know this also depends on the steering base + wheel you have but it will give a rough idea of the space needed.
@@tomvdlouw the stand itself is about 4-5 in or 10-14 cm. But with pedals and wheel its obviously thicker. Overall pretty easy to put up against the wall on between some furniture.
@@elgatoconlapipa thank you the answer!
"missing charm of those early days" sure buddy is called being broke, im sure anyone with those cheap setup and lack of space would give anything to have a full quality cockpit
Привет от рейсеров Москвы🎉🎉🎉