New sub, Michael Sabo brought me here. I have a 2004 660 that I bought a few months ago. It's my first sport quad and has always been my dream quad. That issue with the reverse switch is very common and that plate is the only way to fix it other than replacing the whole switch for $100ish. Mine has aftermarket bars on it and I guess the solution of the previous owner not being able to mount the plastic piece with the keyswitch and lights in it was to let it dangle like yours was doing. Instead of mounting it how it was from the factory, I relocated the lights into the top of the grill in the hump above the radiator cap and moved the keyswitch to the left fender around the same area as the reverse switch on the right fender. But if you do that, be careful not to interfere with the headlight mount on the inside of the fender. I almost screwed up but luckily I was able to make it work by rotating the key switch 180°. With the N, R, and temp lights, I used the plastic piece they came out of as a template and colored it onto the grill so that the spacing would be the same as from the factory. It turned out looking nice and clean. Another issue that I came across and learned was very common is an issue with the reverse rev limiter. Basically, reverse is useless because it will spit and sputter and stall out anytime you try to use it. It looks like those wires coming out from around the shifter on yours might be an attempt to bypass that sensor, but I did it much cleaner than that. You can tie into it just behind the fuel tank on the left side and I ran a ground wire from there to the battery following the factory wire route. It's another quick and easy fix, however it kills the reverse light. But I would rather have a working reverse than a working reverse light. I look forward to seeing what you're going to do with it and maybe seeing it on Quad Wars as you were hinting.
I'd just install a twist throttle conversion kit. Way better than those dumb thumb throttles. I did it it to my raptor and i like it way better. But that's just my 2 cents.
Heck of a deal! Considering last night i saw one on face book market place just like the one i have for $5,500. And its a 2007 raptor 700r special addition. Prices are nuts !
Love the raptor content ,I got into a raptor this year and found the stock head was corroded at the jacket and the piston started letting pressure into the coolant system , needless to say new stock head hi comp piston and the Fixins , ps if any shaving come off the piston like mine, remove/check that oil sump pump and clear it’s screen from debris in the bottom of the engine.
Nice it's about time to get the 660 started. I have an 03 myself. When I acquired it I had the busted headlights and reverse switch and key bezel as well. I dont have Instagram or anything to contact you directly with. But I do have some headlight parts and front hubs with rotors and some other shit I'd be willing to donate if you want or need it.
@@StupidFastJohn hell yeah dude. Tomorrow I'll dig around my garage and see what I have and check the description for the email. I dont know if anything I have would help you out but at least with an email contact I can let you know exactly what I have lol. Mines a work in progress too but as it sits it rips haha.
A couple issues with the 660r that I know of is weak second gear I’ve seen more than a few with 2nd gear just gone and the other issue is it’s hard to keep the carbs on them they love to just blow the carbs off under hard acceleration and on rough terrain but they have pretty good torque and they are fast the 686 big bore on them is a nice add on.
Like your video very much Will check the rest of yours out and new ones that you put out I’m 60 and I do the same thing in my garage I’m always looking forward to learn something
Thanks Nick! I put her on hold because theres not a ton of interest in her for some reason 🥲 now shell sit in the back for awhile. My views have been wayy up lately so trying to keep that rhythym n get on the algo train bro! 👊
The blue 660 was my iconic dream quad when I was a young teen!! There so mean looking. Nice find there man!!!! U can check timing by popping that other flathead cap off the stator cover. Line it up to t.d.c and slip a small fuel line down the spark plug hole while coming up to tdc on compression stroke. U hit the mark and the line stops rising, your on time. The head and valve covers crack so easy bro. Id check that before pulling the topend.
@@StupidFastJohn seen the work you do so I'm sure you'll have nothing to worry about, looking forward to the new series man! Just sold my 07 trx450 and picking up this 660 for the same price tomorrow
Ill be straight i actually am keeping content on this channel strict to atvs and powersports in general but i am opening a second channel for my automotive based stuff that i will be finishing her on! 👊
Great job on the 1st episode👍👊👏💪 the beginning the skit it had me dying🤣, both machines was close pretty much even if u ask me, yes weight and body position does play a huge factor, I can't wait to see the one with Mike's 400 against the 450 That's gonna be worth the wait, I think his 400 or the 450 would be good against the 700 raptor or both banshee's.
@@StupidFastJohn cant wait to watch them, I think I'm going to be coming up close to you guys I'm going to a place called Fairless Hills all I know is it's around Philly somewhere.
@@kdcustoms1272 i had it up on my insta story last week, believe its still under my profile though. I am keeping the channel strictly to powersports at this point so she wont make it up here unfortunately 👊
Bro the skit 😂😂😂
skit is pop in swedish lol
New sub, Michael Sabo brought me here. I have a 2004 660 that I bought a few months ago. It's my first sport quad and has always been my dream quad.
That issue with the reverse switch is very common and that plate is the only way to fix it other than replacing the whole switch for $100ish.
Mine has aftermarket bars on it and I guess the solution of the previous owner not being able to mount the plastic piece with the keyswitch and lights in it was to let it dangle like yours was doing. Instead of mounting it how it was from the factory, I relocated the lights into the top of the grill in the hump above the radiator cap and moved the keyswitch to the left fender around the same area as the reverse switch on the right fender. But if you do that, be careful not to interfere with the headlight mount on the inside of the fender. I almost screwed up but luckily I was able to make it work by rotating the key switch 180°. With the N, R, and temp lights, I used the plastic piece they came out of as a template and colored it onto the grill so that the spacing would be the same as from the factory. It turned out looking nice and clean.
Another issue that I came across and learned was very common is an issue with the reverse rev limiter. Basically, reverse is useless because it will spit and sputter and stall out anytime you try to use it. It looks like those wires coming out from around the shifter on yours might be an attempt to bypass that sensor, but I did it much cleaner than that. You can tie into it just behind the fuel tank on the left side and I ran a ground wire from there to the battery following the factory wire route. It's another quick and easy fix, however it kills the reverse light. But I would rather have a working reverse than a working reverse light.
I look forward to seeing what you're going to do with it and maybe seeing it on Quad Wars as you were hinting.
Oh its definetely going on quad wars! Lol thanks alot for the sub brother 👊 ill write these all down and use them in my vids ✊
@@StupidFastJohn Hell yeah, I can't wait! I emailed you a few pics of the switch and dash lights relocation I was talking about.
That noise you were hearing was the starter spinning because you were turning the engine backwards
Yea i goofed that one 🤣👊
Oh and nice skit dude!!! Was not expecting that smashing lmao!!!!
🤣👊
I'd just install a twist throttle conversion kit. Way better than those dumb thumb throttles. I did it it to my raptor and i like it way better. But that's just my 2 cents.
Thats a great idea!
Cool bro! Just watched the quad wars and that was a sweet video!! Totally excited for the this and what ever mike brings to the table!!
Thanks Bro! We plan on doing mamy more of those!
Heck of a deal! Considering last night i saw one on face book market place just like the one i have for $5,500. And its a 2007 raptor 700r special addition. Prices are nuts !
Thats crazy dude inflation is terrible bro!
Bro go deep into this raptor 660 video I have an 05 and it needs some work maybe I can work on it and use this video for guidance
Will do, im kind of hoping the bottom end is in good shape, thats alot of extra work if shes torn up 😅😭
Haha the Faggio 50! I'm a fan of GTA myself
DUDEEEEEE we have been DYING for somebody to recogniz that 🤣🤣🤣✊👊
Good quality vid as always man. Just a heads up for next time you spin the motor over, go counter clockwise. Keep up the good work.
Thanks man will do 👊
man that's so sick I love the 660 Raptors
Thanks brother! ✊
@@StupidFastJohn do u know where I can buy a Yamaha raptor 250
Lmfao the pc destruction
🤣✊
Love the raptor content ,I got into a raptor this year and found the stock head was corroded at the jacket and the piston started letting pressure into the coolant system , needless to say new stock head hi comp piston and the Fixins , ps if any shaving come off the piston like mine, remove/check that oil sump pump and clear it’s screen from debris in the bottom of the engine.
Awesome tip brother much appreciated 🤟
I've had couple of raptor's they are tough little quads. Good video. Quad wars sounds awesome!
Yea i agree the rappys are tough sob's man! The 1st ep of quad wars is live on mikes channel 🤙🤟
Awesome, I have an 03 and am in the middle of a rebuild, lmk if you want to sell the a arms or axle. Lol
Nice it's about time to get the 660 started. I have an 03 myself. When I acquired it I had the busted headlights and reverse switch and key bezel as well. I dont have Instagram or anything to contact you directly with. But I do have some headlight parts and front hubs with rotors and some other shit I'd be willing to donate if you want or need it.
Bro you got an email? Id be happy to to at least cover the shipping 👊✊ my email is in the description of every vid broski
@@StupidFastJohn hell yeah dude. Tomorrow I'll dig around my garage and see what I have and check the description for the email. I dont know if anything I have would help you out but at least with an email contact I can let you know exactly what I have lol. Mines a work in progress too but as it sits it rips haha.
A couple issues with the 660r that I know of is weak second gear I’ve seen more than a few with 2nd gear just gone and the other issue is it’s hard to keep the carbs on them they love to just blow the carbs off under hard acceleration and on rough terrain but they have pretty good torque and they are fast the 686 big bore on them is a nice add on.
Awesome info! I have heard about the 2nd gear issues. The carb is a new one but also great to know bro, thanks for sharing! 👊✊
Man that raptor must be wild, sooo wild you got to chain it up. 🤣
LMFAO! 🤣😭👊
Love the content can’t wait to see what you find out about the top end
Thank you! Me too im nervous 😅
Like your video very much Will check the rest of yours out and new ones that you put out I’m 60 and I do the same thing in my garage I’m always looking forward to learn something
wow Russell that is awesome thanks man!
I got one that was big bored, stage 2 cams I think? Yoshimoura exhaust. Cost me 1k, thing is a BEAST. It’s a 660 special edition, 03
I always loved the special edition ones 🙌
As always love the content johnny, when’s the drift trike coming back?! Can’t wait to see that bad boy finished
Thanks Nick! I put her on hold because theres not a ton of interest in her for some reason 🥲 now shell sit in the back for awhile. My views have been wayy up lately so trying to keep that rhythym n get on the algo train bro! 👊
Ya those back a-arms are sweeeeet!!!
Hell yea man ✊
The blue 660 was my iconic dream quad when I was a young teen!! There so mean looking. Nice find there man!!!! U can check timing by popping that other flathead cap off the stator cover. Line it up to t.d.c and slip a small fuel line down the spark plug hole while coming up to tdc on compression stroke. U hit the mark and the line stops rising, your on time. The head and valve covers crack so easy bro. Id check that before pulling the topend.
Roger that thank you for the advice bro 👊
they crack and break from the decompression mechanism flying apart.
My buddy bought a niche top end for his yfz and it blew up in a week, be careful man, love the quad though im picking a clean 02 660 up tomorrow!
Nice! I appreciate the heads up as i have no experience with them. If its a chinese piston i will most likely change it out!
@@StupidFastJohn seen the work you do so I'm sure you'll have nothing to worry about, looking forward to the new series man! Just sold my 07 trx450 and picking up this 660 for the same price tomorrow
Where u buy it from you sale it let me know hit me up
I just bought 2020 raptor 700r I wanna see your in the mud rut!!!
Oh its def going head first into that mud rut!!! ✊🤣
@@StupidFastJohn bad ass brother! Bout to go crank mine up!
I’m buying a mustang in the next few months and it would mean a lot if u could finish the hellcat mustang
Ill be straight i actually am keeping content on this channel strict to atvs and powersports in general but i am opening a second channel for my automotive based stuff that i will be finishing her on! 👊
You love that wrench in the skit at least it was the computer and not mike’s head 😂😂
🤣✊
Cool video BRO
Great job on the 1st episode👍👊👏💪 the beginning the skit it had me dying🤣, both machines was close pretty much even if u ask me, yes weight and body position does play a huge factor, I can't wait to see the one with Mike's 400 against the 450 That's gonna be worth the wait, I think his 400 or the 450 would be good against the 700 raptor or both banshee's.
Thanks bro! 🤣✊ weve got so many matchups planned its crazy lol
@@StupidFastJohn cant wait to watch them, I think I'm going to be coming up close to you guys I'm going to a place called Fairless Hills all I know is it's around Philly somewhere.
nice vid man
Thank you man ✊
Man you're already basically good to go as far as axle and arms. Thing should be badass when you're done!
Agreed! Shes going to be awesome 👌✊
@@StupidFastJohn I think you already got Mike beat if you do more tests than just dragging lol. Raptor 660 is a 2nd gear drag machine!
Awesome vid and edits and filming and bike and skit
Thanks Connor! 🙌
What year?
Gonna be a sick ride, what state are you in? I'm in ny
Im in pa
Thanks tac!!! Shes gunna be a hellraiser dude
@@StupidFastJohn cool I'll probably hook up with Mike & you this summer
@@tacatv129 word bro im down!
I absolutely love the raptor 660 content man I'm really excited to see the next video of it
Awesome thank you Matt, today 9am ✊
Badass I have the same quad with a Yamaha 600 twin snowmobile engine
Love 660r got one myself
Awesome bro ✊
The fact that I had to skip through 2 whole mins just to get to some real TALKING 😅
Good investment on the 700
Looking forward to this
Awesome me too man ✊
The yellow 400ex vs the 660 would be sick
It stinks the yellow 400 is already sold this week 🥲
new sub, QUADWARS BIATCHS LOL
Yes!!!! Right on brotha ✊
Please do a 686 bulid
Im almost sure thats whats in it ✊
Better order a L&A design 1-way bearing assembly your gonna need it
For the starter clutch?!?
@@StupidFastJohn yes sir
Wicked kool man
Thanks bro! Shes gunna be another ripper for sure 🤟👊✊
@@StupidFastJohn RIPPING STOMPING SNORTINN MACHINE lol
Nice Tee shirt, hope was free :)
LOL its a Pete Hager #save sport quads 1, i won it a year ago on the instagram give away ✊👊🤟
Just sold my raptor about a month ago... kinda miss it. But this $3k is nice....lol
Ahhh dang bro 🤙 thats ok you can always get another!
@@StupidFastJohn Yeah i wanted a banshee actually, but everyone wants a arm and a leg for them. So now i'm looking for a Gsx-r 1000 ;)
Yea its crazy, i just bought a busa too. My first one ✊
@@StupidFastJohn nice. do you have a video of it yet?
@@kdcustoms1272 i had it up on my insta story last week, believe its still under my profile though. I am keeping the channel strictly to powersports at this point so she wont make it up here unfortunately 👊
Crapter!!!🤣🤣🤣
LOL bro the video is on mikes channel 🤣😭✊👊
Bought the same bike for $100
😂 🤣🤣
It's not a 700r but it's a yamaha 😁😁
🤣 lyt bro
Lose* everything
Can i gain instead? 😅👊✊
@@StupidFastJohn lmao just fucking with u bro bro
@@bookcomplex 🤣👊
Where you buy it from you sale it let me know hit me up.
Love your content
Awesome vid and edits and filming and bike and skit