yes , rpm filter s must with this tiny frame ,, its wide open or nothing I am using the speedy bee F7 mini 35amp paired with 2207 1855 xing 2 motors , That little 35 amp board is so lite and powerful super dependable for a practice quad paired with the speedy bee tx800 crystal clear video
Just when I finished building my switchback based on your video... thanks! XD There is a lightswitch already waiting on my table though and your vids are super helpful to see how a pro builds his drones. Thank you so much for these!
Minchan! Love the video and a massive fan bro! I hope one day you can come to FarmLifes Farm out in Capetown South Africa and we can finally meet the legend! Keep up thr great flying and all the best for the future!
I’m surprised that you are using mr30 connectors for the motors. I remember back in the day all ESCs and motors came standard with bullet connectors but this practice has been abandoned because since those connectors are usually not connected and disconnected often enough humidity would get in and make the contacts unreliable. Hopefully this will not happen with the mr30.
your props are badass ,, switchback is super tight love it so light. I have the updated pro lite . I am using the M5 pro its just a little bigger .easier to control for me not as good as you YET hahahahahah then i will go to the switchback ,, the M5 pro can use 30 x 30 stack too and 6mm arms I broke an arm on the Switchback already .. 6mm are really stiff arms where as the switchback seems more forgiving
@@jammybarry123barry4 i can race fine with a bit more weight🤷♀️ and i rather trade weight for durability tbh, cause i crash a lot hehe. Dont get me wrong if i had mad money to just full send on a lighter frame build i would. But i dont so my Cobra SLX Evo 5” frame will do just fine🤷♀️
The fin is to give clearance after a crash when the quad is up side down. You can then use “turtle mode” to flip the quad back and in some cases fly again. That’s super practical is you crash far away or really want to finish your race.
@@drewbledrones Music is fine, but after adjusting the volume to hear him speak, then later in the video the music is turned up (too loud) when he's not speaking. So the difference in volume is too large. Not a big deal, but a little annoying.
For those asking for a tune, Karate Race Preset in BF 4.3
MUST USE RPM Filters
For F7 use Dhsot600 and F4 Dshot300
Dshot2400 only !
yes , rpm filter s must with this tiny frame ,, its wide open or nothing I am using the speedy bee F7 mini 35amp paired with 2207 1855 xing 2 motors , That little 35 amp board is so lite and powerful super dependable for a practice quad paired with the speedy bee tx800 crystal clear video
Great Video! When will your tune Video be Out?
Hehe
🤣🤣
@@nitrofpv this was Not a Joke...
@@propcounterfpv probably never i guess ;) a magician never reveals his secrets
@@nitrofpv He said, that He will make a Video.
Thank you for posting this great race frame build. Just placed my order and making the “SWITCH”!. 4 frames on there way to northern califas!
Just when I finished building my switchback based on your video... thanks! XD
There is a lightswitch already waiting on my table though and your vids are super helpful to see how a pro builds his drones. Thank you so much for these!
Minchan! Love the video and a massive fan bro! I hope one day you can come to FarmLifes Farm out in Capetown South Africa and we can finally meet the legend! Keep up thr great flying and all the best for the future!
thank you for taking the time to share this build
Yeee so excited to see this. Thank you for taking the time to make it!!
Waz up T.Tickles FPV!!
@@81davido yoooo
🤩..weight? 🙏
Great build video, like the changes to the the frame. Can you share your tune profile ?
awesome build lookin forward to building this one
What are your thoughts on the normal lite vs the lite t700 arms?
Awesome video. Looking forward to more like this
ITS BEATIFUL 🦁🦁🦁
Could you make a build video with the kronos?
Very interesting that you put a cap on the FC. What voltage and F do you use?
Rubycon HLZ 25V 330mkf
@@azixaka where do u add the capasitor too? Does it improve filtering?
What’s the weight
What is the auw? Thanks for the build.
They never tell us what the lil cap is for with the fc. VTX! Right on
Awesome video. Can you share the STL files for the fin and cam mount?
switchback's true-x vs lightswitch's kind-of-H. which one do you think better? or does it makes any difference?
Do you have to have the Imersion Rc rapidfire? Because Fatshark goggles are expensive and I already have other ones
My mck 51466 do not fit on this grame ! Why is that ? It Touch the camera, i printed many different cam mount and still touching
What is the weight fully assembled? :)
why are you using a 25v cap on a 5v rail?
Nice video! Quick tip, lower the volume of the music next time when you're speaking!
awesome! looks great
Why do you spin the motors with your hand before you install them?
I’m surprised that you are using mr30 connectors for the motors. I remember back in the day all ESCs and motors came standard with bullet connectors but this practice has been abandoned because since those connectors are usually not connected and disconnected often enough humidity would get in and make the contacts unreliable. Hopefully this will not happen with the mr30.
Nice build vid - how would you mount the second RX antenna from the Ghost hybrid duo on this frame?
Mondo 기계공학과 나왔죠 ㅎㅎㅎㅎ
I Know its a little late but on the antenna. What type of polarization did you use?
Looks like you have to remove the whole bottom plat in order to change an arm?
He made building FPV Drone look so easy lol
👍🏻👍🏻👍🏻🔥🔥
which rates you are using on this one?, i have same specs :)
🔥🤘🤘🤘🤘🤘🔥
What capacitor do you use on the FC? Does it has great impact?
Whats the flight time for racing n crusing for the pack
Is it better frame than the switchback pro?
Show! What size stack bolt?
your props are badass ,, switchback is super tight love it so light. I have the updated pro lite . I am using the M5 pro its just a little bigger .easier to control for me not as good as you YET hahahahahah then i will go to the switchback ,, the M5 pro can use 30 x 30 stack too and 6mm arms I broke an arm on the Switchback already .. 6mm are really stiff arms where as the switchback seems more forgiving
What is the distance between front and rear standoffs ?
Doesnt seem like a lot of motor protection on the frame so I’ll probably pass on it. Looks like a cool looking quad though!
its a racing drne lol you need it to be light...
@@jammybarry123barry4 i can race fine with a bit more weight🤷♀️ and i rather trade weight for durability tbh, cause i crash a lot hehe. Dont get me wrong if i had mad money to just full send on a lighter frame build i would. But i dont so my Cobra SLX Evo 5” frame will do just fine🤷♀️
@@5olace Lol
@@5olaceWeird question but what’s your name on DRL I think I know you from it 😂
@@jammybarry123barry4 its literally my name 5olace. And yee im on DRL a lot hehe
大神 ，分享一下你的rate和使用的桨叶呗。 谢谢！😃
Total price?
Bro great frame, it's a pity that I can't get it :(
Tuning please
I'm not an expert in drone building or fpv racing, but what's the thing over the camera for? I've never seen anything like that
The fin is to give clearance after a crash when the quad is up side down. You can then use “turtle mode” to flip the quad back and in some cases fly again. That’s super practical is you crash far away or really want to finish your race.
@@Julienrenauduk thank you, that's a really clear and helpful explanation
Thanks for the video. But please normalize the music volume, it becomes very loud compared to your speech.
I disagree. He uses the music to fill the empty space in which he doesn't talk and it makes the video much more pleasing to watch.
@@drewbledrones Music is fine, but after adjusting the volume to hear him speak, then later in the video the music is turned up (too loud) when he's not speaking. So the difference in volume is too large.
Not a big deal, but a little annoying.