Print Flexibles At Insane Speeds With E3D HEMERA - Ender 3 Upgrade
ฝัง
- เผยแพร่เมื่อ 14 มิ.ย. 2024
- More info on the Hemera: e3d-online.com/e3d-hemera-fea...
Creality Silent Board 1.1.5: geni.us/Creality115Board
Ender 3 (Banggood): geni.us/Ender3BG
Ender 3 (Gearbest): geni.us/CRealityEnder3GB
Printable Parts: www.myminifactory.com/object/...
Firmware: www.dropbox.com/sh/kfgquurwen...
TH3D PIN 27 Breakout Board: www.th3dstudio.com/product/ez...
Other Hemera Guides: e3d-online.dozuki.com/c/Hermes
Vampire Castle: www.myminifactory.com/object/...
Wallet: www.thingiverse.com/thing:299...
Vase: www.myminifactory.com/object/...
Other Hemera Upgrades:
Tevo: www.myminifactory.com/object/...
CR-10S Pro: www.myminifactory.com/object/...
Sidewinder X1: www.myminifactory.com/object/...
Should you wish to support me, you can do so via:
Patreon: / 3dmakernoob
paypal: www.paypal.me/jcasha
Want to send me something? go ahead (Normal mail as courier packages get returned):
Attn: Joseph Casha
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe
#Hemera #E3D
------------------------------
Music | Far Away by Declan DP
Watch: • Declan DP - Far Away (...
Download/Stream: hypeddit.com/link/nm6x6y
------------------------------
-----------
✌✌Affiliate Links ✌✌
Matterhackers: geni.us/MH3DMN
Amazon International: geni.us/3DMNoob
Gearbest: geni.us/3DMNGB
Banggood: geni.us/3DMNBG
Aliexpress: geni.us/3DMNAE
Recording Equipment:
Main Camera: Panasonic Lumix G7: geni.us/LumixG7
(B-Roll) Canon EOS760D: geni.us/CanonEOS
Canon EF 10-18mm: geni.us/CanonEF1018
Canon Lens: geni.us/Canon2470
ElGato Stream Deck: geni.us/Streamdeck
Elgato HD60S Capture Card: geni.us/elgatohd60
Timelapse - GoPro Hero 5: geni.us/GoProH5
Microphone, Rode Filmmaker Kit: geni.us/RodeFMkit
Light Boxes: geni.us/StudioLights
High Speed SD Card: geni.us/SandiskSD
Should you wish to support me, you can do so via:
Patreon: / 3dmakernoob
paypal: www.paypal.me/jcasha
Want to send me something? go ahead (Normal mail as courier packages get returned):
Attn: Joseph Casha
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe
#Formnext #Formnext2019 #Epsilon
------------------------------
We Are One by Vexento
/ vexento
/ vexento
Music promoted by Audio Library • We Are One - Vexento (...
------------------------------
-----------
✌✌Affiliate Links ✌✌
Matterhackers: geni.us/MH3DMN
Amazon International: geni.us/3DMNoob
Gearbest: geni.us/3DMNGB
Banggood: geni.us/3DMNBG
Aliexpress: geni.us/3DMNAE
Recording Equipment:
Main Camera: Panasonic Lumix G7: geni.us/LumixG7
(B-Roll) Canon EOS760D: geni.us/CanonEOS
Canon EF 10-18mm: geni.us/CanonEF1018
Canon Lens: geni.us/Canon2470
ElGato Stream Deck: geni.us/Streamdeck
Elgato HD60S Capture Card: geni.us/elgatohd60
Timelapse - GoPro Hero 5: geni.us/GoProH5
Microphone, Rode Filmmaker Kit: geni.us/RodeFMkit
Light Boxes: geni.us/StudioLights
High Speed SD Card: geni.us/SandiskSD - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] : ONE ลุมพินี 67 วันนี้!! คู่เอก "นักรบ vs ทาเกียร์"](http://i.ytimg.com/vi/eahGc1XmrEU/mqdefault.jpg)
Joe on speed talking. So glad the Hemera is as great as we were all hoping it would be. Thank you for the video.
"Stress vase" Love it!
Wow that is seriously impressive
pure gold, thanks! Especially because I recalled my order on time before shipping (12v -> 24) thanks!!!
Thanks for the high quality video - I just bought one for my heavily modified Original Ender 5
This video helped me decide that I need this. now to choose the lucky printer to get this upgrade Thanks Joe keep up the great work.
Man I want one so bad :( I was greatly confused by the naming when I first saw your video pop up in my notifications, but then I read about the reason for the new naming. Great video as always!
Made me even more excited to get one for my ender 3.
Yay!! Thanks for featuring Vampire Castle and using it to test !
This is impressive and Joe nails this excellent product!
Ive been waiting for something like this to cone out!!!
Hey Joe, great work. I love E3D products and this is just as good as I knew it would be. I'll be getting one for the #Borg soon.
Thanks, seen a few reviews of this extruder, and I might just need to order it. I have the Titan Aero, just hate taking it apart when I get a clog.
I'm pretty sure you designed the mounts for the sidewinder x1 thanks so much. Printing all of them now and will be adding the hemera to the x1! Now only to put my flex sheet to get that bed able to level.
That background wall piece is super interesting!
Looks great I know what I will be myself for Christmas :)
wow! I've been sitting on 3 spools of ninja with no way to print it - sold!
Thank you Joe, I purchased one this morning. A direct drive model. You and Tom have done a fantastic job introducing us to this product. I have a modified Ender 3 and a Sidewinder X1. Which do you think would be best served with this extruder?
Thanks for the mount :) - I really appreciate it ^^
Thanks for the vid, Newbie in 3d printing here and looking for all the info I can get on the Ender 3 . right now looking on upgrading to ABL auto bed leveling
It’s relatively easy to upgrade, you’ll find a ton of guides online :) and welcome to the family
I got my hemera up and running and can confirm - it's an absolute beast! Printing flexibles with 60mm/s is easy as PLA and the results are amazing! Time to stock up on TPU filaments...
maybe you can help me, but im having issues with printing tpu at even 10mm/s. it just seems to expand in the heatbreak and then stop extruding. i can easily print pla at 100mm/s but tpu isnt playing nice at all. ive tried anything from 200-260c, adjusting tension, but no dice.
@@turbo280zzz are you running the stock fan or a silent one? noctua ect. might not have enough cooling. other than that a rectraction of 0.5mm with 50mm/s did the trick for me
@@Deagorsarrh reassembled and fixed issue. Must've been some gap somewhere
great video, make me want to purshase one :), what hot end would you recommend to go with it? want to really pimp my ender 3 pro but just not sure what all the parts to go with (still waiting for my 1.1.5 board and bltouch that are in the mail). nice review:)
Good work, thanks for the video and review
Now we need a Prusa mk3 Hemera
surely this just bolts up... its just an extruder... its not like its using anything super specific to the ender
It’s not specific to ender 3, use the written guides linked on e3d-online
@@ooliver At the time of the comment they did not have guide for the prusa yet, but I see they do now. :-)
@@zimmy1958 the 2 before you clearly have never looked at a prusa 🤣 they're so very different from an ender motion system.
@@neilsiebenthal9254 Ok did not know. :-) I only have a prusa mk3s (love it) and a Anet A6(very old and not used any more). The world is full of key board experts which I am not one lol.
That is pretty amazing to be able to go that fast with ninjaflex. Currently on my mk3s I can only do 20mm/s. Or else things just end up wrapped around the drive gear. Any idea when support for the MK3S will be available for the Hemera?
with the way Hemera is made you need only basic modeling for MK3s, so it shouldn't be so hard to model yourself.
Joe, you are a very cool host 💟 humble and smiling 💥
Thanks buddy :)
@@3DMakerNoob only the truth :)
Great video - have really been looking forward to this. With the mount, do you think it would work with an Ender 5? As it is the same gantry, I'm assuming it would.
It would, but I’m unsure of how it would work in terms of space. You might need to move the limit switch
Joe, could you tell me what fan you used for this upgrade. I downloaded the volcano STL - but the fan I bought on amazon that looked just like yours had an opening that was about 30% smaller...it will be easier to order the correct [24v] fan off amazon than to try and modify the design. Thanks
Anyone notice that the heat break cooling fan is insanely loud on this? My 24v fan moves a lot of air but it sounds like a vacuum cleaner....
You had my sub at "this is my stress vase".
I love to get this for my Ender 3 Pro. I got the SKR e3 mini v1.2 installed, i think installation would be the same as for normal ender board?
Also is the already a case available for this? I'd like to have it all enclosed so less dust etc
Love the Video Love the Hemera Fancy trying that on a TAZ6, Always wanted to print Flexibles
Had a TAZ 5 conversion that I added the little plastic "Thingaverse) piece. Printed perfect flexibles. Then spent $ to upgrade to Aerostruder. Big mistake.
Can you tell more about slicer settings? Retract speeds and so on
A CR10 part cooling fan works on 24v? I thought the CR printers were 12v for some reason.
Nice. New firmware shouldn’t be needed if running a min SKT board and marlin 2.x right? Just a potential swap of extruded motor direction.
Hi John nice work! I recently saw a video vom 3DPrintingCanada witch references you mounts as well. I’m Glad that i found the Creator of this wonderful parts is here. I have a CR-10V2 and i have ordered a Hermera as well. I saw that your Tevo Tarantula Pro version uses another „Exaust“ to cool the nozzle. Witch one do you suggest? I also wanted to know if you think PLA will be enough or if i schuld Print the Mounts with ABS oder PETG? Regards and thanks for your response
umm, regarding the voltage, some Ender 3s, 3pros and v2s do ship with 12V outputs on certain things. So for anyone out there, if you have a multimeter, CHECK IN ADVANCE. If you don't, check the PSU and the parts the outputs lead to to make sure the voltages are right etc. So if the output says 24V and has a wire leading to the cooling fan, check the voltage on the cooling fan to make sure it actually is 24V. My Ender 3 v2 has 12 volts on some parts and 24 on others
That part cooling fan seems to fit pretty well, got a model number on that?
I have the Hemera, but can't decide if I should install this on the Ender 3 pro or the Artillery X1
I just ordered the hemera and new board. Can you post a link to the blower fan? Also why did you need the th3d firmware? Why won't the firmware that came on the new board work? Thanks!!
It would be cool if you'd also link that fan in the description- or at least cite the dimensions of the output. I'm in a tough spot because I'm applying this to a CR-10s5 which uses 12v, so I have to find something similar dimensionally & in performance but that uses 12v.
Hi Joseph , Been watching your videos for long time now. Very concise and i like your honest reviews . Keep it going ..I'm currently planning have a stock ender 3 pro which i want to upgrade with the hemera.
i request you to do continuation video on a Hemera for PLA and ABS on a prusa slicer . Thank you.
Hi Joseph,
After watching the video i couldnt resist and bought the hemera , Couple of things i wanted to clear though .Regarding the Compatibility of X carriage , no where they've mentioned it works on ender 3 pro on their site .Your X cariage would fit ender 3 pro ? as its for ender 3? is there any difference ? thanks in advance .
Oh boy its arrived, mounting plate for the Flash is done, just waiting for a fan, come on postman damnit lol
Seeming as any parts cooling fan would work which one do you recommend?
I have a flexion and print TPU at 80mm/s on my wanhao i3 plus for the last 4 years. I never thought of trying 100mm/s +
Mine did not come with the hot end preinstalled with heater cartridge and thermistor in place already.
Hi,
I was thinking of buying a ender 3 or ender 3 pro. Should I buy the ender 3 pro and upgrade with the hemera? Does it affect stringing, ghosting... because of the extra weight?
Just fitted the E3D HEMERA to my Tevo Flash that already had a BLTouch fitted, Ive changed the probe offset from extruder position from behind the extruder to the left side (-42) , do I need to change any other settings in the firmware ?
Thanks for posting this, I'm about ready to order one for my CR10s Pro, I see that you have a mounting bracket on MyMiniFactory for the CR10s Pro, but I'm confused as to what Hemera version to get, is it the Bowden Tube version, or the direct drive version?
He is using the direct
I honestly don't see how the bowden is an improvement over a normal setuo
1-sided cooling could have been part of the phone case failing. Most 3rd party part ducts blow from both sides of the nozzle w/ 1 or 2 5015 fans.
Can the printed brackets be made of PLA? I re-designed the duct for a 5015 fan and printed it in ABS, but my mounting plate was printed in PLA. Do I need to re-print it?
Good lord, that's just nuts. I'm in the same situation with my Anycubic i3 Mega, not wanting to do much to it after putting a geared extruder at the start of the bowden tube. It's basically a stock Mega-S at this point. I thought I was printing flexibles well already (Ninjaflex technically works, but it's a nightmare for Ninjaflex reasons), but I wouldn't dream of printing that in any TPU as it is. I'm definitely keeping an eye on this now. I'd definitely be interested in seeing how a Prusa MK3S takes this, btw. I don't expect that kind of night and day difference, but it'd be a neat "just because" comparison if you have any sitting spare after you tend to the budget machines.
Thank you very much.
My Ender 3 now prints with the Hemera.
Unfortunately the center of the virtual printing bed in Cura is not the center of the Ender 3. The BL Touch also measures the first three points directly at the edge of the printing bed.
Is it possible to set this somewhere?
In your adapted firmware of TH3D I can't find any settings for the BL Touch.
Thanks a lot.
What and how much infill did you use. I am thinking the BL Touch holder looks ready to snap off just by looking at it :-/
i was wondering what is the difference between the ender 3 you linked in the desc. and the ender 3 pro
by the way where did you get the hemera hot-end with the printed mount
I installed this on my cr-10s pro. Does it take forever to heat up for you? It seems like my fan on the hotend is on nonstop at max and I haven't been able to get it to heat past 200c. Haven't even tightened my nozzle yet
I just received mine and there doesn't look to be a way to mount the hotend fan....there look to be 2 holes intended for the fan but they aren't threaded...any chance you can check and see how yours is mounted?
Print profile for this thing and TPU? Having a helluva time getting it dialed in and wondering why I switched to this from the stock hot end.
It would seem the European 8mm screw length is a bit longer than the ones I can get in the US. I only get 2.5mm of the screw sticking out to thread into the Hemera and given the nut is 2.5mm and the thickness of the area of the mount is 1.5mm, there is only 1mm of thread to screw into to the nut. In other words, not enough. Is the source for the base available? I would like to either get the screws to go about .5mm deeper or shave .5mm off the face of the base so I can get the screws to engage the nut. Thanks.
kinematics of the printer making a big impact? I expect to see the Hemera on a CoreXY then :P
this is totally the style of extruder i would expect on the big prusa printer they wanna release in 2020, big build volume, core xy and high speed, if i could i would already preorder
@@Pixelplanet5 depends, this still isnt a particularly light extruder, lighter than other direct drive solutions, but still not super light. I can speculate that Prusa is likely to use this or something similar, but maybe something like the Zesty Nimble with a remote motor but a direct feeder.
Will the Direct Drive version fit on the Ender 5 Joe?
Hey Joe! I have a question for you. With installing the Hemera, because of the size, the nozzle isn't in the same position as the stock one. When I put the nozzle where the printer thinks the center of the bed is, it's about 15mm forward and a bit off to the right. Is there any way to compensate for this without adjusting the bed size in the Marlin firmware?
there are offset settings in Marlin. For example, on my v6, I believe I had to set y offset to -13
also offset can be done from within the slicer. cura has this setting in the "extruder" section of the printer settings
I have an ender3 Pro at home. If I would buy the Hermera would it be a drop in replacement for me I would I have to tinker with the Firmeware of my printer?
Did you use the stock heater cable? I seem to have my z axis restricted by some cable length.
hi , i try to install an hemera on my ender 3, I tried with latest version of th3D firmware but my extruder seems to work like steps per mm are 95, so i try with your FW and it do the same, can you help me ?
can you tell me why the nozzle dont stay heated goes up to 184 and remains at 117 so it means its not printing right helpppppppppppppppp please.
Quick question trying to port your config over to modern marlin2 just wondering what settings you ended up tweaking?
Hey Joe! So I got 4 HEMERA upgrades for my print farm for my Ender 3's. I am unable to get some clear Sainsmart TPU printing for longer than 20 minutes before either: A) The filament stops feeding (low tension), or the filament gets crushed and is blocked by the tight tolerances of the Bowden adapter (high tension). I've gone through E3D's entire troubleshooting guide- waiting for support to get back to me. Any ideas what might be causing this issue?
Is there an option to do this upgrade with the new cr-touch?
Can this be used on the Prusa MK’s and is it better than the stock Prius extruder tip?
which version of hemera should i buy for the ender 3? 12 or 24 volts?
The boards say 12/24v because the ender is 24V, and cr10 is 12V, the boards I believe (never tested) are entirely common and swappable
What is the total weight of the set-up? Thanks in advance!
Been waiting for this to come out ever since it was announced, just one question though:
Is the direct drive on an Ender 3 about equal to the stock extruder in terms of ringing and ghosting?
Or could this be an issue?
If this is an issue, would it be possible to buy the direct drive kit and simply convert it to a bowden setup with the bowden adapter?
You will get more due to the added weight, however with a bit of tuning on acceleration and jerk it can be reduced or removed. Also, you can buy a bowden version :)
@@3DMakerNoob Thanks, I should clarify that I wanted to also upgrade the hotend to the V6, so I thought about getting the direct drive as it includes the hotend while then getting the bowden insert to turn it into a bowden version while using the V6 hotend as an upgrade over the stock one.
(I realise I can just buy the bowden version and a V6 hotend seperately, but your answer about the ghosting has reassured me that it won't be too severe with the direct drive version)
The bed is way heavier anyways so the weight in your Y axis is what's limiting acceleration really
@@nirodper True, especially now that I have the glass bed on it too.
Still any added weight would have an impact.
Would you recommend the Ender 3 rather than Ender 3 Pro???
I printed the mount in petg because Im thinking pla might not be happy with the heat. The petg feels like it might not be rigid enough though. What's otjers experience with this?
Not the Hemera, but i am running a totally printed setup on my A8, all in PETG and i have no print quality issues what so ever!
@@ale6242 yeah. I got mine together and it seems to be working great!
Dude can you print a cover for that box on the wall behind you.
Would the upgraded board fit creality CR20 PRO also?
What do you recommend for the Tronxy D01?
Impressive!!!
This was the stock ender 3 (non Pro) ?
correct
Can you get it with a 300° hot end from e3d
Joe, would you mind sharing your profile to print ninjaflex at 100mm successfully? I can't get it to print faster than 30mm/s with temp at 260
Any idea if the Ender5 pro will be supported ???
Can you add a hot end to this extruder?
It looks like your mount could be used for all the CR-10 type printers? CR-10, CR-10S , etc? (Minus the Pro series)
Correct, but I also designed a mount for the pro series :)
@@3DMakerNoob perfect! I am printing the baseplate now with ColorFabb HT (high temp) filament. I put my printers in enclosures and wouldnt want the mount to get soft on high temp prints! I also opted for your original version so I can go between BL or EZABL probes in the future Thanks!
What do you need to change in SW ? I dont have the BLT touch.
Any idea if the Ender5 will be supported?
Thanks for the great video, can this work with the Anet A8?
Yes it can, but it will require a different mount
has anyone found a mount for bltouch with a normal blower fan?
any plate out there for ender5/plus with bl touch mount?
How much did the X Y Z origin change from stock?
did you have to calibrate the extruder ?
So you put a $130 extruder to the Ender 3 but you don't upgrade the mainboard? :/
Would it be loss some print area?
does this extruder work on an ender 5 plus ?
What are yall getting for retraction settings?
Great stuff Joe, looks like an awesome piece of kit. I know you've been using the name Hermes for a while now so it's not surprising you said it at 2:02. We're ALL going to need to do the switch. Cheers, JAYTEE
But did you loose any print volume?
Thanks, can you do one for sidewinder x1, also does X1 need additional volcano hotend for hermes ? As the original X1 is a volcano style while Hermes is not?
e3d-online.dozuki.com/c/Hermes_Printer_Upgrades Already a guide for that!
Thanks. Hemera comes with regular heat sink but sx1 comes with volcano style, should one get volcano for hemera also?
I think you put the hotend fan on backwards. Looks like you mounted the fan guard on the inside (against the heat sink).
N/M, looks like it's how E3D intended it to be. Just a poor design choice. Why even have a fan guard if you're going to melt it against a heatsink?
Not really sure what you are referring to. There are no fan guard on the hemera
@@3DMakerNoob the hotend fan mounted on the left side against the heatsink