ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2019
- E3D Hemera Extruder on the AM8 or Anet A8 - the build
In this video, I am changing my AM8 extruder to the new and "hot" E3D Hemera extrusion system. Check out my first results in the video and please tell me in the comment section what you think about it. Big thanks to @Thomas Sanladerer for his great work to make the Anet A8 Hemera mount.
If you missed my AM8 build video series, this might be interesting as well: • Playlist
My guide on how to install Marlin firmware on the Anet A8:
• Ender 3 Marlin Firmwar...
Guide for configuring probe offset values for Marlin firmare: • Marlin Firmware 1.1.X ...
Guide how to set your bed centering in Marlin firmware: • Bed centering with Mar...
Get the Anet A8 here:
🛒 Amazon: geni.us/aneta8
Get the Hemera extrusion system here:
🛒 eBay: bit.ly/hemeraebay
🛒 E3D: e3d-online.com/e3d-hemera
Tom's take on the Hemera for the Anet A8:
• How to upgrade the Ane...
Modified Hemera mounting plate for the thinner GT2 belts:
Prusaprinters: www.prusaprinters.org/prints/...
Thingiverse: www.thingiverse.com/thing:403...
Marlin firmware configuration guide for the hemera extrusion system:
e3d-online.dozuki.com/Guide/E...
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for TH-camrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
Your reviews are always very thorough, great vid
Indeed very nice tutorials, simple and yet the right choices 4 your upgrades, keep up your video's we learn allot from it !!!!!
Great to read you liked it! If you have ideas for other topics I should cover, just ask me to make a video about it.
I really love your videos! certainly the part where I think of something and you make a video of it the same day 😁. Keep up the good work.
Thanks Jorick De Clercq!
This is the stuff🤓👍
Good job on the videos. I too have a AM8 with Hemera extruder. Next week, Im finishing off the AM8 with SKR 1.3 with TMC2209s and a new tft display. Not really sure if I can call it an AM8 at this point...
nice work daniel. the fan shrouded BL touch mount do you know where the STL is for that please?
Hi, what bltouch mount do you use for this hemera mount?
Hello, i love your films. Can you tell me, how you called the brass screws hollows? And hou did you mounted it in ready 3d print? Special work(project in program, or maybe drilling) or just using hammer to get it tight?
How do you add BL touch mount? and is there a link for a mount for one? Thank You
Hi , I just bought the Hemera .Any chance you can review it on artillery sidewinder X1 ? Thanks.
You can adjust the E-Steps also over the Octoprint Interface on the terminal.
1. Type M503 into the terminal and it will show some information about the printer.
2. In the line where M92 is shown, you will find also a E100.00(probably or a other number). That is you e-step conut.
2.5 You can extrude 100 mm of filament to see how long it actually is. After that mesurement you can start the calculation
The calculation of the correct e-steps is: (Travel that you shold have in millimeters / travel that you have in millimeters) * e-steps that you have at the moment= new E-steps.
3. You have to copy the line and exchange the E-Steps that you need to for a correct extrusion. For example I got a dual drive Extruder(3:1 gear ratio) and I changed it from E100.00 to E414.72(my calculation for the e-steps).
4.After you changed the e-steps press enter so that the printer accepts the changes
5. You need to save the changes by typing M500.
6. Double check if the new e-steps are saved by typing M503 to se the informations about the printer again.
Wow, super in depth comment, I like this so much. Thanks for the hints and tips! What I show in the video was the result of me assuming that the configuration change in Marlin would change also the settings in the printer and I think a lot of people will fall into the same trap, so I made this point in the video. Thanks for explaining the alternative!
I've noticed that there is a difference in the X carriage rod spacing on some anet a8 machines. I don't remember the measurements off the top of my head but there is indeed a 1mm difference. I think my machine uses a 46mm spacing and some either 45 or 47.
Sounds like a general issue. Maybe the design of the mount should be changed to more have a slot like design for the lower screw mounts opposed to be just holes that are quite inflexible. I will see if I can apply such a change.
@Matthew Findley the Anet A8 has injection moulded X axis mounts and they have over time modified them, I guess to save a bit of plastic, thingiverse has X carriages in rod spacing ranging from 45-48mm!
@@Crosslink3D This sounds like a great idea, I'd definitely like to see this design.
Is there a Fan Duct right on Thingverse?
Firmware has always been difficult for me is there a guide in installing the firmware and why is the HEX file needed? Any help would be appreciated.
FWIW, the "TM" tag doesn't mean it's a registered trademark, at least in the US. That's what people use for un-registered trademarks (i.e. someone who is claiming it, but doesn't have it registered yet). The ® symbol is for registered trademarks. :)
It would be nice to see how you wire up the motor and you hotend to the main board.
I've used the original Motor cable, which fits to the new motor. Good point about the cables though, I will cover this in the follow up video.
Thank you. Great video's.
For the price of whole system they could have included a mounting plate as well. I don't like the idea of replacing sturdy steel for plastic mount. All in all it seems like a very expensive upgrade for very few benefits. If they went with smaller stepper motor and lighter construction, that would be awesome as it already has lower gear ratio so big motor is not needed as much. Then it would be something to think about.
Asked kindly? Weren't they sent a legal letter?
Moinsen,
ich habe mal eine Frage, besteht die Möglichkeit das du mir eventuell bei meinem AM8 helfen kannst?
Ich möchte auf die neuste Marlin (1.1.9) updaten aber leider verstehe ich das mit dieser Configuration.h Datei nicht so ganz. -.-
Danke dir Schon mal.
Grüße aus dem Norden Deutschlands.
Nice Video! Can you please make a Video about "Knocking"? :D
What do you mean with "Knocking"?
Helen can you get just print another plate
Yeah, it would be great to put my X-carriage on a diet so it can run faster. Maybe just a pancake stepper.
Ok you are doing this for Fun. only.. obviously.
Frankly retrofitting a Creality 10 (type) Dual drive extruder is a far more intelligent path IMO..
Costing a whopping ~10$ it would be an instant drop in for the old Mk8 of the Anet.
Plug 'n play.. period
Plus the Crealty one is the ..exact... functional/performance equivalent of the E3d contraption, with None of the expense or user hassles.
All good, see your point totally.
OK this time it was a nothing Burger at all I guess you needed the money for the personal update