Thanks man, yeah can make a lot of other types of videos while we wait, but hope it doesn't take too long. Would like to get the car dialed in before we start getting snow. Lol
I think she's getting etuned but we can definitely get some updates on it. Have considered live streaming during installs, sometimes we do that on Instagram, but if it was the whole thing it may be a little long. 😅 might have to find the right kind of content for it. 👌
awesome vid, did she already have a front mount and just upgraded to the grimmspeed? just wondering if i could install a front mount and drive it around a little bit without tuning for it... i'm in a 2006 legacy gt wagon so i'm following along with your build
She switched from the factory top mount to this. I would advise to get at least a base tune as it changes volumetric efficiency quite a bit, but the maf is still reading all incoming air so it wouldn't be a massive deal if you were easy on it and stayed out of boost for a little while. Appreciate it man, working on a couple more videos now, but we've had a bit of a slow down on the legacy waiting on our tuner to become available. Legacy vida should be back going within a week or so 👌
@@MatlasDI nice, my build is at a stand still right now, didn't know the accessport got rid of the stage 2 ots maps until it was too late so I'm waiting for a tune too
"Assembly times may vary drastically" needs to be the standard on all installs. Oh 20 min install? I'll find a way to make it become a 7 hour install.....
For real. I feel like I always wind up getting through long installs faster than i expected, and the short stuff there's always something that makes it take the while day. Lol
i am looking to get the jb400 for my 2013 wrx but I have a cobb fmic. do you think i could make it work or even if i had to order the special intake outlet pipe for fmic?
You should be able to get the sti style pipe from Cobb. It should be just the top sections of the kit that's different between wrx and sti, otherwise I don't think it would be that bad to modify.
Have you truly worked on a car if you havent bled for it though? YES Absolutely put that on Chewie. On a scale from Stock Crosstrek to Tanners Sti before the side exit how loud is Tina's really....
Might have to make it happen lol I would honestly say it's a click under blue when it had full exhaust. The car is straight piped with just a cat and for whatever reason is incredibly loud at times. Especially when it's backed into my garage being revved to 5k rpm over and over 🤣
@@acidmike3535 I'm still waiting for my tune revision so I can drive it unfortunately. Josh has been super busy this past week. hopefully we'll get into it soon. So we can actually get some test runs on it.
Greatly depends what you're looking for. The 6 speeds tanner and I picked up for super cheap both had issues that needed fixing. Mine is still in a thousand pieces 🤣
@@SUAVE541 outbacks 5eat is built and good, it'll go in the legacy soon and the outback will get swapped to a 6mt. Legacy stock 5eat at that point is still in okay condition, but probably would need a valve body.
I love Bubbles so much. Tina's done such a good job on all the teal pieces
Has a really nice colors chime it doesn't deviate from. Put a lot of thought into it for sure 👌
Awww thank you!
Good video and the videos don't always have to be your projects, I enjoy watching customer based repairs, maintenance and upgrades/modifications.
Awesome. I'll start incorporating more stuff were working on. Allows for a lot more content/ talking points as well 👌
Tina made her whole car loud. You and Tanner made it faster. More mittens.
Yaaaas. Need to get the tune revision back. I'm currently in limbo on tuning. 🥲
That's me all day long yelling at assistants about holding the flashlight...lol!! Magnetic my brother!!
Tina’s car bubbles 🔥🔥🔥🔥🔥
Has been a cool car to mess with. Definitely has come a long way. 👌
Love the vids man keep'em coming. 👌
Thanks man, definitely will do 🙏🙏
Bubbles is looking good. A great video guys and gals. Subies forever.
Thanks Paul 🙏🙏
Gotta love on the banana a little in the middle 🤣.
Phoenix is the happy banana. 🤣
Great video, glad you are posting while you are waiting for Mittens tune.
Thanks man, yeah can make a lot of other types of videos while we wait, but hope it doesn't take too long. Would like to get the car dialed in before we start getting snow. Lol
@@MatlasDI understand, we had a little bit of snow here in the last couple of days.
Make more content Matt! We're all waiting to continue to boost this channel.
Video comes out tomorrow and merch is dropping 👌👌
Tina's car is hot!
Has its own personality. Very unique and fun. 👌
@@MatlasDI it definitely sounds like it
Very aggressive growl, but badass none the less! 💯💪🏾
Fellow LGT owner. Love the vids bro!
Thanks man 🙏
It's about time the car can make some whp for how much other than the powertrain has been done to it
Agreeeeeed! Excited to see it make some power finally 😆
Just ordered mine lol cant beat the 1200 price tag. Now the wait begins
They're very nice. Will not be disappointed 👌👌 we've already put them on like 5 different cars lol
Just got a brand new one for 960 can’t wait to put it on
Yeeeaaaahhhhh buddy!!!!!
😁👍🏻👍🏻
Awhhhh yeah 👌👌
Hell yes rhats awesome. Keep up the good teamwork
Yup yuppp, thanks man 🙏
Lmao😂👍🏼 You guys keep killing it!
Thanks Omi 👌😆
Yee
💯💯
Bubbles dyno video coming? And yes more content, ever thought of doing live stream install?
I think she's getting etuned but we can definitely get some updates on it. Have considered live streaming during installs, sometimes we do that on Instagram, but if it was the whole thing it may be a little long. 😅 might have to find the right kind of content for it. 👌
Sweet, just followed on Instagram
DAMM BRO, LOTS OF MONEY INTO BUBBLES.
Lots of fun bits on it. Now we're just helping the the performance factor there 👌
awesome vid, did she already have a front mount and just upgraded to the grimmspeed? just wondering if i could install a front mount and drive it around a little bit without tuning for it... i'm in a 2006 legacy gt wagon so i'm following along with your build
She switched from the factory top mount to this. I would advise to get at least a base tune as it changes volumetric efficiency quite a bit, but the maf is still reading all incoming air so it wouldn't be a massive deal if you were easy on it and stayed out of boost for a little while. Appreciate it man, working on a couple more videos now, but we've had a bit of a slow down on the legacy waiting on our tuner to become available. Legacy vida should be back going within a week or so 👌
@@MatlasDI nice, my build is at a stand still right now, didn't know the accessport got rid of the stage 2 ots maps until it was too late so I'm waiting for a tune too
Yeah they've made a lot tough in that aspect 😅
She has some interesting taste in aesthetics. Damb that thing is obnoxious loud.
Such an angry and loud car for having such a fun name. 😂
"Assembly times may vary drastically" needs to be the standard on all installs. Oh 20 min install? I'll find a way to make it become a 7 hour install.....
For real. I feel like I always wind up getting through long installs faster than i expected, and the short stuff there's always something that makes it take the while day. Lol
Please fix that gs logo lol jk but really my ocd pisses me off 😂 🤣 loving the car. She should've had its own yt channel
I know right 🤣 yeah she has a lot of content on her ig and stuff, but don't know if she'll branch out onto the tube..
I'd hate to be y'all's neighbors 🤣🤣
Surprisingly all of our neighbors encourage us to be loud and obnoxious. I don't get it, but we consider ourselves very lucky 🤣
Wow Like you said Matt Bubbles is loud as shit.
It's so loud lol. I don't even know why 🤣
That car is loud! I want to hear it launch control
Should be able to get some shorts of it in the future. 🤙
Once the final tuning is done we will get some clips. :)
i am looking to get the jb400 for my 2013 wrx but I have a cobb fmic. do you think i could make it work or even if i had to order the special intake outlet pipe for fmic?
You should be able to get the sti style pipe from Cobb. It should be just the top sections of the kit that's different between wrx and sti, otherwise I don't think it would be that bad to modify.
@@MatlasDI thank you very much for the help. I am looking in to see if they sell just that pipe currently. Love the videos! Keep it up
Have you truly worked on a car if you havent bled for it though?
YES Absolutely put that on Chewie.
On a scale from Stock Crosstrek to Tanners Sti before the side exit how loud is Tina's really....
Might have to make it happen lol
I would honestly say it's a click under blue when it had full exhaust. The car is straight piped with just a cat and for whatever reason is incredibly loud at times. Especially when it's backed into my garage being revved to 5k rpm over and over 🤣
Did you not tune after the turbo?
We had a break-in tune from her tuner that was loaded onto the car after installation.
What did this car make after this install?
I believe she is in the high 300s now.
Hey its tuna
The bubbler herself. 🧐
@@MatlasDI waiting to see a driving video of mittens
@@acidmike3535 I'm still waiting for my tune revision so I can drive it unfortunately. Josh has been super busy this past week. hopefully we'll get into it soon. So we can actually get some test runs on it.
7 days without a new Matt video. What am I supposed to watch?!?
Yeah I know i suck. Working on one now 🤣 we got the updated tune as well so doing some etuning tomorrow finally. 👌👌
@@MatlasDI Nice! Yeah, people were asking about you in Tanner's live. He told people to comment here 😆
@@foxunfocused 🤣🤣 dead. Surprisingly only you commented so far. 😂
@@MatlasDI How dare the others chicken out.
ayyo where can i source a transmission worth buying??? 😅
Greatly depends what you're looking for. The 6 speeds tanner and I picked up for super cheap both had issues that needed fixing. Mine is still in a thousand pieces 🤣
@@MatlasDI was your old one toast?
@@SUAVE541 outbacks 5eat is built and good, it'll go in the legacy soon and the outback will get swapped to a 6mt. Legacy stock 5eat at that point is still in okay condition, but probably would need a valve body.
The neighbors are going to kill y'all.
They actually encourage it. Our neighbors are bad influences 🤣
Looks like traffic cop 😜
🤣🤣 pretty much.
Bubbles be loud …
You're gonna have to speak up a little. Can't hear too well 😕 🤣
First
Ohhh yeahhh 👌👌👌