Just wanted to say "thank you so much" for the little blurb on the center button on the left-hand switch bank. That is exactly what I needed to know. I was able to get the connector and inserts for the socket under the left panel at my local dealer so i could power off of it to run my accessory lights in a very clean fashion.
Well done Sir! After hours of head scratching your video seems to have all the info. I need. Thank you so much for taking the time and effort to provide the easy to follow instructions!
I want to hook up Underglow lights to one of the AUX buttons and have it constant hot when the Ignition is off, without having the Ignition switch turned to Aux all the time. Is this possible?
I have a 2019 tri glide. I'm trying to find where my 3 buttons on the left bank end up on the bike. My left button is for factory fog lights. The middle switch button (green wire) is under the left side panel, but the right button can't find where the wire ends up at. ?
Thanks for the vid. My dealer sold me the harness with some heated grips and a fan equipped cooler but didn't need it for either so was wondering what it was for haha
Great video. I was doing research on my acc button because I plan on running a switched power circuit for adding interior saddle bag and tour pak lighting
@@Alan_1where did you find the different switches? I have followed your video and everything went as you said. Only issue(s) I’m having are the switches. I have Harley Aux but they are upside down. Plus I want to install the Light icon switches as well. Part numbers are non existent.
2019 tri glide. Looking for where the right side bank of 3 button switches end up at for hooking up extra assorries. I know the 2 acc buttons end up on the left side bike cover. But the left button switch, where does it end up for hooking up extra assorries?
Alan, I have a 17 road glide s. I just bought from rickrack a 3 switch setup that mounts next next to ignition. what all do I need to run my hd oil cooler fan and fog lights from the switch? thanks!
Great videos! Thanks. The wiring is almost exactly the same on my 2018 Tri-glide. I have the Cool Fan installed, from the Dealer when new. They used 925 connector for the fan as you did. I have now purchased the kit and installed the RH ACC kit and have installed the middle switch on the LH side. I liked your video on your installation but would rather not solder/crimp/extend. Is there a way I can follow the HD instructions and plug the Battery wire terminal into the plug that the fan is connected to? There is an "empty terminal" with a white seal pin in it. If I remove that and install the battery cable there and then to the battery, would that work or cause trouble? TIA if you can answer or give me a way to add another 925 connector. Cheers
Steve, that is exactly how I wired this in, how you describe. I also have the cool flow fan using 325b, but as you said, there’s a free pin on both connectors of 325b, so I de-pinned and added the power from the battery in one and it connects to the harness in the other, super clean, better than installing a Y connector!
Steve / Kamado - 2017 FLHTKSE CVO - Just like both of you, the fan was installed at the dealer so it uses the 325b. All I want to do is utilize the middle switch hole on the left hand side to run my fog lights. Can you tell me how to do that? All I need is to install a center button on the left dash and have a switched pos / grnd wires I can attach to. How can I do that?
@@cwickgo9 This video gives you the majority of the answer. You’ll also need the fog light wire harness. I bought the Harley harness to tie from the green wire he pulls out of the accessory harness in this vid and ties to his fog lights, I did exactly the same. I installed Harley fog lights so the the Harley fog light harness plugs right in to the lights. As he did, I added a molex connector from the accessory harness to the fog light harness. You’ll also have to buy the switch from your dealer to add to the middle slot of the left bank.
How many amps can you draw from the green wire that you used for your fog lamp that is controlled from the middle position button of the left buttons bank ? Since you use it to power your fog lights from it, I suppose it's also more 2 amps. And it is already relay connected from the factory ? thanks for your help
Hopefully someone more current on this can answer. When I did this install I researched it well and that circuit was rated enough for the fog lamp load.
Very helpful. Question: To where does that third switch on the left panel send power? You've got what looks like a cooling fan. I'm looking to use that to run some lights, but I can't figure out where to tap into positive power.
so can you or someone else tell me how many amps the acc #1 switch that runs through the relay is good for i need 4 amps. my 325a is used for the amp and speakers
So the left switch bank came stock with the passing lamps switch and two blanks. I then added the Daymaker fog lights and bought a second lamp switch. The other switch controls the Coolflow fan and I am pretty sure that came with the fan kit.
Hello, and thank you for a very in-depth video, I totally appreciate that you are extremely versed in electricity, soldering, etc. However, the everyday biker, like myself, may not be that inept. I honestly could not follow you as you were adding and subtracting all sorts of things that has nothing to do with a straightforward installation of the Harley Aux Power Switch Kit Fairing Mount 71400129. At least, it had nothing to do with what I needed. I am not upset that you have gone an extra yard or 2 in describing what you have on your own bike. Honestly, all I am looking for, and I dare say others as well, is a straightforward installation of the 71400129 Power Switch. Can someone please direct me to a straightforward video for the installation of the 71400129 on a 2018 Ultra Limited? Thank you again for your work. I hope I did not offend you in any way. It was not my intend at all.
yes, first off Thank you for the video. It takes a lot to do one. But like he mentioned. I was following you perfectly and then you went on to what you were doing to your bike that is not the intention of harness. So,, you lost me after you changed how the pin is supposed to be installed.
Adding my unwanted $.02! The only thing he changed was that he didn’t use the 325 connector to run power to the harness. Just like him, I have a cool flow fan installed, and the 325 connector is already used. I do think it’s possible to just add the power pin from the battery, install it in the 325 connector as Harley instructions say, and then add the harness connector pin to the other side of the harness. (Take the pin out from the harness 325, and add that pin. But I likely lost you there! He did it the way he did because it’s a silly use of the 325 just to power the harness, a splice does the same. Hit me with Qs
@@Kashmirknight does it matter that it’s on the right instead of the left like most. Are the harnesses the same behind the faring that if I want my aux lights to be controlled by a button it can be on either side
Just wanted to say "thank you so much" for the little blurb on the center button on the left-hand switch bank. That is exactly what I needed to know. I was able to get the connector and inserts for the socket under the left panel at my local dealer so i could power off of it to run my accessory lights in a very clean fashion.
Excellent information I needed to hook up my oil cooler fans!! Thanks!!
Well done Sir! After hours of head scratching your video seems to have all the info. I need. Thank you so much for taking the time and effort to provide the easy to follow instructions!
This video you put together was greatly appreciated. Well done!
I want to hook up Underglow lights to one of the AUX buttons and have it constant hot when the Ignition is off, without having the Ignition switch turned to Aux all the time. Is this possible?
There's 3 spots for Acc Switches, but the Harley kit only gives 2. Is there a company out there that makes Acc Switch Kit for all 3 slots??
Great video, any chance do you know if the Auxiliary Power Switch Kit Part Number: 71400129 work on a 2016 SGS?
I don’t, sorry
I have a 2019 tri glide. I'm trying to find where my 3 buttons on the left bank end up on the bike. My left button is for factory fog lights. The middle switch button (green wire) is under the left side panel, but the right button can't find where the wire ends up at. ?
Great video. My 19 Triglide only has one switch on the left. Will the switches still work?
Thanks for the vid. My dealer sold me the harness with some heated grips and a fan equipped cooler but didn't need it for either so was wondering what it was for haha
Wait there’s another wire! I have white and yellow fog lights I had to pick one color. Are you telling me I couldve wired up both?
Great video. I was doing research on my acc button because I plan on running a switched power circuit for adding interior saddle bag and tour pak lighting
Glad it helped
@@Alan_1where did you find the different switches? I have followed your video and everything went as you said. Only issue(s) I’m having are the switches. I have Harley Aux but they are upside down. Plus I want to install the Light icon switches as well. Part numbers are non existent.
@@tompeyton8308 It's been too long for me to remember but it seems to me I included pics of part numbers on boxes. Everything was HD oem if I recall.
2019 tri glide. Looking for where the right side bank of 3 button switches end up at for hooking up extra assorries. I know the 2 acc buttons end up on the left side bike cover. But the left button switch, where does it end up for hooking up extra assorries?
Alan, I have a 17 road glide s. I just bought from rickrack a 3 switch setup that mounts next next to ignition. what all do I need to run my hd oil cooler fan and fog lights from the switch? thanks!
I noticed on the left aux switches you have buttons that show fog lamps and a fan.....where did you get those buttons? Do have the part #? thank you
Do I need two different plugs for the fairing on a 2019 Street glide the switch
SO HELPFUL BROTHER... THANKS SO MUCH!!!
Outstanding! Thank you!
Do they have a version with 3 aux in it that can be run from under seat to the switches
Great videos! Thanks. The wiring is almost exactly the same on my 2018 Tri-glide. I have the Cool Fan installed, from the Dealer when new. They used 925 connector for the fan as you did. I have now purchased the kit and installed the RH ACC kit and have installed the middle switch on the LH side. I liked your video on your installation but would rather not solder/crimp/extend. Is there a way I can follow the HD instructions and plug the Battery wire terminal into the plug that the fan is connected to? There is an "empty terminal" with a white seal pin in it. If I remove that and install the battery cable there and then to the battery, would that work or cause trouble? TIA if you can answer or give me a way to add another 925 connector. Cheers
Steve, that is exactly how I wired this in, how you describe. I also have the cool flow fan using 325b, but as you said, there’s a free pin on both connectors of 325b, so I de-pinned and added the power from the battery in one and it connects to the harness in the other, super clean, better than installing a Y connector!
Steve / Kamado - 2017 FLHTKSE CVO - Just like both of you, the fan was installed at the dealer so it uses the 325b. All I want to do is utilize the middle switch hole on the left hand side to run my fog lights. Can you tell me how to do that? All I need is to install a center button on the left dash and have a switched pos / grnd wires I can attach to. How can I do that?
@@cwickgo9 This video gives you the majority of the answer. You’ll also need the fog light wire harness. I bought the Harley harness to tie from the green wire he pulls out of the accessory harness in this vid and ties to his fog lights, I did exactly the same. I installed Harley fog lights so the the Harley fog light harness plugs right in to the lights. As he did, I added a molex connector from the accessory harness to the fog light harness. You’ll also have to buy the switch from your dealer to add to the middle slot of the left bank.
How many amps can you draw from the green wire that you used for your fog lamp that is controlled from the middle position button of the left buttons bank ? Since you use it to power your fog lights from it, I suppose it's also more 2 amps. And it is already relay connected from the factory ? thanks for your help
Hopefully someone more current on this can answer. When I did this install I researched it well and that circuit was rated enough for the fog lamp load.
Where can I get the kit and how much for 2015 street glide special
Very helpful. Question: To where does that third switch on the left panel send power? You've got what looks like a cooling fan. I'm looking to use that to run some lights, but I can't figure out where to tap into positive power.
Does this help?
th-cam.com/video/BYVI8uEOWYU/w-d-xo.html
Or this?
th-cam.com/video/DNzbQ4jqqK4/w-d-xo.html
@@Alan_1 Yes, that video was exactly what I was looking for!
Did you ever find out what the engine knock noise was in your Harley? Saw your comment on another account.
so can you or someone else tell me how many amps the acc #1 switch that runs through the relay is good for i need 4 amps. my 325a is used for the amp and speakers
It’s good for 2amps
@@bobhat2001 it is a 2 amps out of the switch its10 amps out of the relay with a 10 amp fuse
Can I power an accessory without ignition switch on the bike? Battery power from accessory switch?
very thorough, thanks. I can only find the right side switch kit 71400129? Do you know where to find the left side aux switches?
So the left switch bank came stock with the passing lamps switch and two blanks. I then added the Daymaker fog lights and bought a second lamp switch. The other switch controls the Coolflow fan and I am pretty sure that came with the fan kit.
@@Alan_1 understood thanks. can't find it anywhere, even the switches themselves. I can only find the right side. Thx again
@@kmern6979 Watch this video about 7:37 for the lamp switch- th-cam.com/video/DNzbQ4jqqK4/w-d-xo.html
and at the he didnt show how btight the lights are
Good job
Hello, and thank you for a very in-depth video, I totally appreciate that you are extremely versed in electricity, soldering, etc. However, the everyday biker, like myself, may not be that inept. I honestly could not follow you as you were adding and subtracting all sorts of things that has nothing to do with a straightforward installation of the Harley Aux Power Switch Kit Fairing Mount 71400129. At least, it had nothing to do with what I needed. I am not upset that you have gone an extra yard or 2 in describing what you have on your own bike. Honestly, all I am looking for, and I dare say others as well, is a straightforward installation of the 71400129 Power Switch. Can someone please direct me to a straightforward video for the installation of the 71400129 on a 2018 Ultra Limited? Thank you again for your work. I hope I did not offend you in any way. It was not my intend at all.
yes, first off Thank you for the video. It takes a lot to do one. But like he mentioned. I was following you perfectly and then you went on to what you were doing to your bike that is not the intention of harness. So,, you lost me after you changed how the pin is supposed to be installed.
I couldn’t follow him through either…..
Adding my unwanted $.02! The only thing he changed was that he didn’t use the 325 connector to run power to the harness. Just like him, I have a cool flow fan installed, and the 325 connector is already used. I do think it’s possible to just add the power pin from the battery, install it in the 325 connector as Harley instructions say, and then add the harness connector pin to the other side of the harness. (Take the pin out from the harness 325, and add that pin. But I likely lost you there! He did it the way he did because it’s a silly use of the 325 just to power the harness, a splice does the same. Hit me with Qs
Where did you find the switch that was labeled as a fan? I'm looking for one!
You can order just the fan button from ur locally Harley dealer. Parts guy can look it up in there parts book.
So~ what have you accomplished by adding 2 of acc switches ??
Set up for heated seat control from the dash, as well as LED accent lighting.
Or driving/ auxilery lights
@@Kashmirknight does it matter that it’s on the right instead of the left like most.
Are the harnesses the same behind the faring that if I want my aux lights to be controlled by a button it can be on either side
WTF didn't know you needed to be a certified electrician and be able to reach the max to hook up a damn power cord
Can't hear you dude!!!