The Baddest 4 Cylinder Nitro RC Engine 13,500 RPM
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- I test run the baddest most Beautiful 4-cylinder Nitro RC engine I have ever seen or ran.
The Revving sound was beautiful and I was absolutely amazed by how beautiful this engine is, then I found out it redlines at 13,500 RPM.
I show the engine and its entirety and I run it a few times in preparation for the upcoming episodes I have with this engine.
I was Very Impressed with this little engine, the build quality was out of this world and I was genuinely blown away by how incredible it looks.
it was a crazy little engine and it sounds absolutely intense!
The link to the engine is below as well as some related videos
Toyan 4 Cylinder Engine: bit.ly/3ql2jPp
Toyan Engine: bit.ly/2HXd3lM
10% Off Coupon Code: Warped
GoPro in the Intake Of The Supra : • Driving with Gopro Ins...
Full Video Of MR2 3S-GTE Turbo Sound: • Pure Sound: SW20 MR2 T...
Program guide:
00:00 Intro
00:33 What I think of the Engine
01:37 Setting it Up
02:13 Test Run to fill water
04:12 Test Run
06:28 FLIR Run
07:11 Outro
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka - บันเทิง
Toyan 4 Cylinder Engine: bit.ly/3ql2jPp
$100 OFF Coupon Code: 100, Save $100 and use my 10% Off Coupon Code:Warped
Starting Kits: bit.ly/36P6yew
Toyan Engine: bit.ly/2HXd3lM
Try to put a turbine in this engine, and by the way, there is no oil in the pallet from the factory, fill it in :)
Make V12 nitro engine rev to 20k like F1. If anything this is like a Minature Motorcycle engine.
maybe a radiator for pc watercooling . bigger and has mounts for a fan
You can get a good fan probably off an ac unit they seem durable
These engines do not take oil.. they get oil from the fuel oil mix.
Very nice! A see through cylinder head along with a supercharger would be a terrific upgrade!
Hey i know your channel
Whats your next project?
OMG he is here
Love your channel man
I like your video with the lawn mower sucking dirt and siezing.
This is awesome! Ever since I saw your video with the single cylinder one I went to the website and saw this bad boy. I can wait to see what you have in store for this little beast.
Incredible craftsmanship! Thank you for NOT blowing it up ♥
Great to have someone willing to take the time and money to do this.!!
Thanks for the upload.!
I wonder how well this would work with a turbo/supercharger
It's too difficult to make it happen but not impossible
@@user-wn9zx6vz3k JohnnyQ90 from youtube tried making it but it exploded or something, not sure if he is still trying to figure it out
@@jurestrojan9649 ye I have seen that
We will find out in the next episode.
@@jurestrojan9649 the step up gearbox he made blew up, the rpm is too high because the compressor is so small in order to create pressure... It's not an easy task man, hope someone actually gets it done
Holy shit this is basically a mini 4A engine
now we can make mini AE86’s hehe
cancerous weeb moment
@@THESLlCK y e s
Thats what i was thinking, an rc 86 with this would be sick!
Its definitely not a 3sgte engine lol
@@oldgolfpunk lol.. actually the first engine I thought of was the punto ocho which I believe was a 4AGE, but I was imagining what the engine's going to look like when I'm done modifying it and I think it's going to look like a 3sgte.. I don't know maybe I got mixed up lol
Your videos are the best. I have learned so much from watching your videos. Keep up the the great work.
Very cool! Thanks for showing it!!
Girls like roses and rings.
Boys like mini engines and radiators.
Yes.
Here before people think your sexist for saying that
Yeah, if that person lives in California, or New York, oh danmit, i do live in California. :(
yes.
what if i like both
You really need to build a RC car around this engine.
For the price it should come with Plug and play kit for the application the person needs 😎😎😎😎
I just bought one as a kit but have not yet started it I'm still in the process of putting the support systems in place. Glad you didn't blow it up, the machining of the parts is incredible for the price, can't wait to start mine.
Great piece of kit. Beautiful design and engineering.
Toyan ceo and everyone else: **give it nitro, Give it nitro, SHOW HOW MUCH ABUSE IT CAN TAKE!!**
wp: 😢 but.... its red... And it has velocity stacks...
I know they hit me in my soft spot lol, The only engine I will have mercy on.
@@WarpedPerception :) Ok but you can buy another after you test the limits of this one :) I enjoyed this episode.
@@raoulraoul7129 if i had the funds. My idea would be to see how many toyan engines it would take to push a go kart.
The ITB’s on this look so nice
What a beautiful noise from that block!
Great! All you need to do now is install your engine on a massive turbo!
Edit: Hol' up 4:09 is this when the RC Engine world comes across the custom PC building world?
Ok
@@barackputin you’re a bit late matey
@@jakehudson1163 Do u fart
i don't know if you asking this as a joke or not, but cars use similiar radiators. if you look trough a cars front grill you can see the radiator.
and im a bit late i know
@@martinfarkas4360 that radiator looked like a 120mm radiator used on PC's but it wasn't until now that I realized it's a lot smaller than 120mm.
"reasonably priced "
Me: :D...... *clicks link sees 700+* cries inside a little
It’s not bad
I died a little too, i could finesse someone and get a long block with that money. Guess what engine I’m going to get 🤣
You can almost buy a new 350 for that lol
This is the first engine I've had that is really genuinely high quality, but I am going to take it apart very soon and look inside I will do a video about it.
@@compunerd For years you could buy the GM GoodWrench 350 Chevy crate engine complete minus carburetor and distributor for $600 bucks. LOL Even less if you knew someone at the parts counter who could get you a better price.
To neighbor: "Hey, ya wanna see my new trick 4 cylinder weed eater?"
Awesome redline! My 1984 Honda VT250-F motorcycle's 90° v-twin also has a redline of 13,500 and it is quite something to experience an engine reving that high in person.
That is one of the coolest things I've ever seen.
Really good camera with in the intro man, love it!
Thank you, my goal in coming to TH-cam in the first place, is to replicate the footage I shot for grid and Forza Motorsports a few years back, but instead of CGI I want to make real video that looks like the video game footage I shot for the game... If that makes any sense
@@WarpedPerception hey that's awesome goals dude. Literally making your dreams a reality. Keep it up!
Man looks like Toyan builds really nice little engines that sounds like a race car in truly small scale
I use this engine on my bicycle, this is the best purchase I have made. You fly through the city like a rocket! I highly recommend it.
“I have much bigger plans for this engine than blowing it up” I am hoping you mean you’re gonna put it in a mini car, because that would be dope.
Runs really smooth right out of the box.
That was such an awesome experience... In the past all the other engines I had to fight with for at least half a day to get them started and then another hour to get them idling properly, I'm pretty sure it's because of very loose tolerances, this engine seems to be built much more precise.
Manifold? It's a fuel rail! Much cooler!
Just like this whole engine. So freaking cool!
Fabulous work !
This engine would be so amazing in a high quality Toyota supra rc model.
Thanks for showing it to us.
Yeah dont blow that engine, its a really nice and chill engine.
Nice video keep it up. 👍😎
bruh why does this engine sound better than my car
Because you drive a Daewoo?
you need four individual throttle bodies.
The smaller the engine the easier it is to be high revving due to the size of the pistons
Velocity stacks are great when matched to the rpm expected. It can be a real tuning option. I like it
Nice b-roll, great editing!
Thanks.. I wanted to make a longer but this video was literally just about showing the engine
I would LOVE to see this thing in an RC airplane, everyone does rc cars but a plane would be awesome!
Same wanted to build it myself but I don't have 700 to spend on an engine
@Adam Irace It weighs 980 grams and makes over 3 ps. My gocart with a tiller motor has the same power and I can go 30 mph with my 150lb on it, so it'll fly. It is also advertised as being for rc airplanes.
It should work in a plane, theres plenty of other RC engines that are much bigger/heavier, especially the radials. Would be a pretty cool project.
It would work in a rc plane, probably with a reduction drive.
@@rcaviator8408 maybe with reduction drive, may not have the torque to spin a reasonable size prop nessasery for flying a plane of the size needed to carry the weight of it. I use a ASP91FS (15cc) turning a 15x6" two blade prop with a span of 1700mm 3.5kg all up weight
This is the quality entertainment I’ve been looking for
I am just waiting for this type of engine that's amazing
this is a 14cc total engine. They make a 32cc engine that is much bigger, and probably sounds just as awesome.
The 32cc is more of an industrial type engine it uses a pushrod for larger RC the 14cc is more of an performance version so it can be used in a smaller RC car
They also make 50cc engines
32cc and 50cc are weed whacker engines or more towards chainsaw engines for performance. They are not nitro engines. These are advertised for 1/10th or 1/8th scale RC cars, not 1/5th or 1/4 scale. This engine has roughly 3 to 7 times more displacement than most 1/10th scale nitro RC cars, they vary from 1.8cc to 3. something cc. 1/8th scale monster trucks usually start in the 3cc range.
Also NONE of them are watercooled a major factor in Nitro RC's being heat control.
@@sylumgand drop that radiator down in some ice water and or maybe put a little piece of dry ice on it with a little fan so it doesn't over heat
@@sylumgand Try actually looking at the web site. The 32 is an in line four cylinder liquid cooled engine. It's no weed whacker engine.
how you had the will power not to IMMEDIATLY put this into a remote control RC Car is Amazing
Dude! Awesomeness 👍🏾 I can't wait for the tiny supercharger and/or turbocharger. Looks like upgrading to a 240mm radiator would be a good idea also? Thanks for all the dope content. Keep it up. Chi-town represent!
I love the fuel rail you Fabed up. Tho you called it a manifold. I see this little engine as a real game changer
Imagine if they make a bigger version of this and put on your corolla
they do, and for the same price lmao
@@eli.drives 😂😂😂
@@eli.drives link rb it you're bsing
@@G.Bfit.93 its called any k engine lmao
@@eli.drives Honda doesn't make engines in their K series that rev this high
"Sounds like a mini F1 Engine"
Has clearly never heard an F1 car.
Now that's a good sounding engine.thanks
That is an awesome engine. runs very smooth.
Imagine this engine in a mid-engined LMP style remote controlled scale model with a cockpit view cam and and onboard mic to capture all the sights and sounds and feed it to the driver in real time.
Yes that sounds perfect!
Your onto something with this bro
Needs two of them vor a v8 then tho
Yes please!!!!
In VR
Gotta luv the exhaust note: "Wow" "Wow wow." Also, Dear Santa Clause, there's this little engine on Warped Perception...
awesome! hope you got good use for it.
Wow been awhile since I last checked in and now your looking a a million subs
Looks like a billet block made for drag racing :D
That log exhaust manifold looks weird, needs a long tube header
preferably the spaghetti setups with no harsh bends at all
Yeah, thought it was an intake. XD
Needs a mini Turbo!
That's the first thing I thought of. 👍🏼
An equal length setup would be awesome.
Love the thermal camera!
Tiny rad is awesome, can't wait to see the inners
Was it camera frame rate sync or was the belt slipping at 4:47? I definitely would love to see a full size in action. Pretty impressive I think.
mostlikely frame sync otherwise the engine would die lol
Looks like the 4A-GE in mk1 MR2 or Levin. Those 4A in the Levins have ITBs.
Was thinking the same thing
Hell no the velocity stacks give me vibes from a 1GZ-FE. Seen it in the 1979 Toyota Corona MKII Grande in New Zealand. Thing runs beautifully
I come back to listen to that thing rev up it's badass
Finally get to hear this thing rip, Toyan is on a roll with these engines, my l200 might need to be upgraded! 😆 Thanks for the vid bud!!!
I just left forgotten weapons for this.... I'm sure it will be worth it.
Dam
@@EthanAdey I'll go back and finish the monolithic AR vid, but I HAD to see this.
İt is
@@joshuagibson2520 mono lower can wait. Engine go VROOOM
@@etam083 I have a diverse line of hobbies lol. All typically involve science though.
Yeeeeee!
I love it I can’t wait for the next episode
Awesome little engine!!
That joker is bad assss! I want one! Looks to large for 1/10 scale. You think it would fit in a 1/8 scale or need a larger scale? Nice video
It is so _s m o l_ and I *love it.*
This is so dope ! 🔥🔥🔥
Looks awesome!
Nice! You would like to see my homemade 49cc RC car!!
I like your sense of humor with the sunglasses and the cap, laughed my ass off.
I don’t get it? That’s how he always looks.
@@malcolmadams2105 oh in that case I was just being sarcastic
Bro that’s awesome I love it keep it up
Thank you !
This was so cool!
We definitely want to see what happens when you cut the belt
I want to see toyan make a diesel rc engine for the rc semi trucks
Yes!”
Diesel RC engines are almost not possible to make, and definetely impossible to profit from.
@@P_double_H funny you should say that, I’ve got a number of diesel r/c engines, and they weren’t expensive at all
What! That is freaking cool!
Finding RC engines is probably one of the greatest things I've ever found out existed
What you do (for me anyways) is an extension of mr. wizards world when we were kids. You do an awesome job.
Thank you so much...lol. I used to watch that show, I almost named my personal Channel Mr Matt's World! but I just left it Matt's World because there is where I'm going to do all the experiments like that coming up soon.
@@WarpedPerception going over there to sub. NOW!
You could buy multiple real 4 cylinders for the price of this mini engine
@@user-fx1vt2dy1b it’s a REAL engine lmao
@@user-fx1vt2dy1b dude, look at what YOU said. You just compared an RC engine to a real engine. For the price of this little toy engine you can buy a real one and rebuild it, so mileage doesn’t matter. Not sure why you’re getting all serious over this lmao
That’s really cool!
Wow that is the coolest freaken motor. Love to see this in an rc car. Bet it would scream.
You should give it the equivalent of long tube headers for it so it sounds really good
Not gonna lie I thought this was a JohnnyQ90 video at first hahah
If you check out his TH-cam page he actually just posted his video today and it's much better. This guy is a rich dufus.
what a piece of Art... Nice
What a great start for a wicked RC build????? C'mon man you know you got the know how to do it!
install this in an RC boat. that would eliminate the cooling issue. Not to mention hauling ass across the water.
That outlet on the bottom right of the block. Is that for an oil cooler? My Conley V8 uses an oil cooler, it’s a dry sump as well.
I didn't see anything about an oil cooler or oil for that matter.
@@WarpedPerception Pretty sure it's a crankcase vent that drains blow-by
@@Mrshotshell yeap its the ccv
Well that’s just cool as can be there good job 👍🏽
dude! im glad you finally found your sunglasses in the Delorean!
Thought this was a 4age with a quick glimpse at first lol
That was my first thought like the old 1.8 "punto ocho" but I definitely thought the 3s GTE was cooler and I believe that's what it's going to look like when I'm done with my modifications
Definitely a cpu fan! So cool! What's that port at the front of the engine on the bottom right?
@Adam Irace I thought so. As it was sputtering, I was thinking it needed a return line back to the fuel tank.
@Adam Irace it was also spewing steam
Should be routed to exhaust manifold to burn off any extra fuel
Wow!!! Very cool!!!
That's cinematic bro!
So, what is that port on the front of the engine that was spitting liquid out while it ran?
Probably the oil from the crankcase. These engines are lubricated by the oil in the fuel that blow by the piston ring(s).
He didn't even break it in.. I feel so bad for that little engine. It's probably not going to last long.
It's fine
You already can see the blow-by from that oildrip peepee 😟
You must not watch this channel much.. this engine was dead before it arrived.
Cool stuff.... keep it up!!
beatiful piece of machinery
I need a 49.9cc version of this, that runs on pump gas.
Too complicated for a motor-assisted bicycle! The little industrial 4-stroke engines do just fine.
@@RollinTwentySix oh come-on, can't a fella dare to dream?
@@RANDOMNATION907 Of course! But a proper dream would involve a Conley Stinger 609, I think :D Check that one out!
@@RollinTwentySix will do , thank you
Now you just need a transmission driveline rear end and a complete car kit with remote control see how it runs then , RC car to scale would be perfect.
That cute little crankcase vent
So cool and interesting!
* Initial D stage 6 intensifies *
dang!!! intro video looked really scaled ... for a second I thought you were using the real large scale engine for footage...
Thank you !, Yes my idea was to recreate the video game footage I shot a few years back for grid and Forza Motorsports.. ever since then I've been trying to figure out a way to make the video game footage but with real video...
@@WarpedPerception almost close to perfection
That thing is Dope!!
What a cool lil engine.