Another great vid. Looks pretty straight forward but i know if i try I'll run into issues. I work outdoors too & am up in Boston so will have to wait for better weather. I subscribed & will be checking out yr past & future vids. Thanks for sharing 👍!
Hi I want to order this lift kit over the rough country spacer lift but have a few concerns. 1. I want to fit 2024 JL wheels (275/55/20) with some wheel spacers 2. For the lower and upper control arms, I have an overland so do they sell new control arms with the Quadra lift II attachment? 3. Did you also replace the coils too? 4. Should I just go with the RC spacer lift with new coils and BS5100 shocks?
That drivers side really sucked. Fortunately I had dropped my tank plenty of times in the past between the 2 commanders so I got it done pretty quickly. Still ridiculous design! I'm about to add the lift spacers on the rear of mine and put my Monroe coilovers back on the rear. Probably should have done all this when I replaced all the controls arms, track bar, and spring isolators lol.
@@ProjectDanH I'm actually adding the rear lift spacers and coilovers this weekend. I've had a clunk since I replaced the entire suspension in the rear. I just found the issue too! The lower strut bolt on the driver's rear (the only bolt I didn't replace) is worn and allows the shock to move slightly. Go figure! I have the bolts too I just didn't replace that one because it came out and went back on easily. So I'm going to do the last upgrade this weekend and replace that bolt while I'm at it.
Commander Dan is the man! Getting ready for the front, part 2 in 60 mins!
Thank you!
Definitely appreciate that you took the time to make it all clean
Thank you!
Love those wheels & tires
Wait till you see the finished product!
Didn’t know he still had a commander, good to see it back!
❤
Looks better painted than rusted for sure.😊
Haha. Absolutely!
Keep up the great work Dan
Thanks, will do brother!
Didn't know you bought it from the auction, great buy awesome rig looks sweet! 👍
Actually got this from NJ 👍
Looks good, I put a 3 inch lift on a 98 xj I used to have never again will I own a lifted vehicle.
Oh man .. why, what happened?
Love the content
Thanks you. Much appreciated!
Great video, makes me want to grab a commander before they are too hard to fin
Get one while you can! They're awesome
Another great vid. Looks pretty straight forward but i know if i try I'll run into issues. I work outdoors too & am up in Boston so will have to wait for better weather. I subscribed & will be checking out yr past & future vids. Thanks for sharing 👍!
Very good video bro, do you think you can post the link to the kit?
Nice job buddy.I would have went with different shocks but I get it...
Thanks buddy! Maybe Bilsteins one day 😄
Good video. Is the coil spring isolater the same on top and bottom?
I think they're different. Thank you
Good Job
Thank you!
Are they dipped in olive oil
Lol. Probably a coolant spill from the accident
I lifted my 2018 Durango (basically a 3 row Grand Cherokee) and noticed right away that my head didn’t hit the liftgate - bonus!!
Lmao!! Such an amazing bonus
Hello! What are the dimensions of the rims and tires? Thanks
Fuel D681 Rebel Bronze Wheels 17X9 5X5.0 (Set of 5)
@ And tires please! Thsnks
@ Did you cut the front wheel fairing?
Hi I want to order this lift kit over the rough country spacer lift but have a few concerns. 1. I want to fit 2024 JL wheels (275/55/20) with some wheel spacers 2. For the lower and upper control arms, I have an overland so do they sell new control arms with the Quadra lift II attachment? 3. Did you also replace the coils too? 4. Should I just go with the RC spacer lift with new coils and BS5100 shocks?
Hey Dan, if one was to buy a Jeep commander what year and or trim would be good to buy, find and get? TIA
Hey! 2008-2010 limited with a hemi!
265/70/17 is like 31,6"
Every Tire make and model run differently
That drivers side really sucked. Fortunately I had dropped my tank plenty of times in the past between the 2 commanders so I got it done pretty quickly. Still ridiculous design! I'm about to add the lift spacers on the rear of mine and put my Monroe coilovers back on the rear. Probably should have done all this when I replaced all the controls arms, track bar, and spring isolators lol.
Lol. That would have been more convenient for you.. how did it turn out?
@@ProjectDanH I'm actually adding the rear lift spacers and coilovers this weekend. I've had a clunk since I replaced the entire suspension in the rear. I just found the issue too! The lower strut bolt on the driver's rear (the only bolt I didn't replace) is worn and allows the shock to move slightly. Go figure! I have the bolts too I just didn't replace that one because it came out and went back on easily. So I'm going to do the last upgrade this weekend and replace that bolt while I'm at it.
In the land of salt on the roads you don't use Never Seize???????? I live in the Northwest no salt and use Never Seize.
Are you kidding??? I bathe in Anti-seize!