Old Model 18V Rotary Hammer Restoration | MAKITA HBR 241
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- I bought this tool from recycle shop. All the batteries runs out of power. The charger socket was cut out. The power tool couldn't test, and I didn't know it works or not that time. However, after the restoration, this tool is working normally again.
Power tool specifications
- Battery : 18 V (3.0 Ah) Li-ion.
- Steel : 7/8" (24 mm)
- Concrete : 13/16” (25 mm)
- Impact energy : 1.9J (1.4 ft. lbs.)-
- No load speed : 0 - 1100 RPM.
- Blows per minute : 0 - 4000 BPM.
- Vibration Level: 12.5 m/s2
- Noise Level: 86 dB(A)
- Overall Length: 16-3/8" (417 mm)
- Net Weight: 7.7 lbs (3.5 kg)
Video section
00:52 repair the 18V charger
01:25 charge the battery
03:37 testing the power tool
04:07 carbon brushes removal
04:49 gear housing complete removal
05:33 SDS drill chuck removal
06:07 change mode lever removal
06:22 inner housing complete removal
06:34 inner housing complete disassemble
07:57 housing set disassemble
09:19 all parts show
09:25 metal parts cleaning
10:39 plastic parts cleaning
12:13 DC armature restoration
14:06 carbon brushes reshape
14:29 power switch checking
14:54 seal ring installation
15:18 needle bearing complete installation
16:02 inner housing complete assemble
18:52 change mode lever installation
20:37 SDS drill chuck assemble
21:13 housing set assemble
22:45 rubber pin replacement
23:42 drill mode wood testing
24:03 drill mode steel testing
24:26 hammer drill mode concrete testing
24:54 hammer mode concrete testing
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show - แนวปฏิบัติและการใช้ชีวิต
The Ingersoll Rand 114GQC Air Hammer th-cam.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.
that makita deserved to be restored and finally found the right mind and hands. thank u mr Gear Show. I really enjoyed your video.
I wouldn’t say it as the gerabox was not fully restored. Only cleaned and grease changed. And in my opinion the concrete test result was not that good. The drill with this diameter should go into the concrete twice as fast. There are o-rings in the hammer assembly that MUST be echxanged in order to restore the gearbox properly. Author of the video did not even find it. Instead he focused on paiting the housing. Give me a break.
Nice excellent restoration. Venus wants her drill back! 😂
Haha... I hope they see it. Thank you!
Great Job Sir.
The LXT Series isn't that old.... Nice tool.
Great job restoring it. Those are not cheap. Great tool to have.
I'm sure you do this, but for other viewers.... As you start to collect Makita batteries (or whatever brand you gravitate towards), start NUMBERING the batteries right away. Get a label maker, mark them 1, 2 3 whatever... And the DATE it was new.... when you have a pile of batteries rolling around in your truck, or your home shop, or both, and all the sudden you have a "bad" pack, that can be a real pain in the keester, if you can't identify it, and pull it out of rotation....
I do appreciate with your advice, thank you so much!
Әу
Please, do not solder wires and then insert them into screw terminals. The solder deforms over time and actually “flows” away from the terminal causing the connection to become loose and unstable. This can lead to arcing and potentially a electrical fire. It’s better to screw the terminal down onto bare wire than it is to solder. The proper way to do it would be to use a wire ferrule that is crimped onto the wire and then inserted into the terminal and tightened down. Ferrules keep the strands of the wire in place and provide the best connection for screw type terminal blocks
Oh, I never know about this point, I do appreciate with your sharing!
Oops i do this alot
Yes you're right. Tin is a soft metal. If you want to do it better, use a crimping tool.
:) i fixed a cord on a old 20W ledlight there the 2leads hade solder onthem and the connect was a wedgetype so understand why did
Its good to see a tool repaired and not thrown away. Nice job.
Thank you!
This is what clean work is all about, well done
Jesteś wielki. Widać ze długo siedziałeś przy sprzęcie makity. Każdy szczegół każdy detal. Pozdrawiam z polski
Absolutely well done
Clean and accurate good work
Nice job...
Im from Indonesia 🇮🇩🙏
Great job, thank you brother. You are so talented
I appreciate that!
Good job Bro.. 👍👍👍 very detailed every step of the repair, very inspiring.. awesome. 🙏
Thank you so much 😀
Excellent job I love the new vibrator.
Yes, it is easier than before. Thank you!
I don't know why, I always waiting your restoration more than other 😁
I think, only your restoration that very detil and clear 😄👍
Un placer ver tus vídeos 👍 excelente trabajo , saludos desde Honduras 🇭🇳
I like watching your restore😘
I'm glad you like my work, thank you!
Absolutely insane!
Man,you is my inspiration.
Thank you🙌🙏
Fan from Brazil!
You're welcome, thank you!
Как повезло инструменту попасть в руки «воскресителя инструментов» 👍🏻. Ваще зачет. Душа радуется.
Спасибо за видео 💪🏻
Makita makes some of the best tools for a good price
Yes, they are.
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
My pleasure, thank you so much!
very good restoration like it , love from india❤❤
Great as usual
Thanks again!
Awesome as usual!!
Thanks again!
يداك من ذهب ،،،شكرا لانك تنشر السعادة ،،،
واو ، أنا سعيد للغاية لسماع ذلك ، شكرًا لك!
Increíble restauracion de esa herramienta
Fanstastic work 👏👌 thanks my friend👍👍👍👍👍
Exelent work 👍
Great job. Why do you open the screw manually and then start the screwdriver??
Thank you! I open the screw manually and then start the screwdriver, because I want the video quiet.
@@gear_show the sound on your videos is excellent. thank you too for not putting music.
Fantastic job !!!
It could have been fun if you have restored the box too. ^^
Bravo, great job!! 👌👏👏
Big thanks
Another great restoration. I was shocked that you did not restore one of the batteries. Seems like your main thing.
Thank you!
Ottimo lavoro, complimenti
Excelente trabalho 👏👏
Thank you!
I always like your video and your work is best showing part by part detail showed thanks sir 👍👍😊.
Another amazing job another amazing restore congratulations my friend
Thank you so much 👍
Nice video mate . Keep going. 👌
Thank you! I'll do.
Como sempre, um trabalho formidável.
O carregador pequeno de bateria, ele funciona bem em bateria modelo LXT réplica?
Pois comprei duas bateria Makita LXT réplica, mas estou confuso se esse tipo de carregador não danifica as células da bateria, visto que o carregador LXT recarrega a bateria usando o conector amarelo.
Eu não sei detalhes sobre isso também, isso é um experimento.
Boss watching from Bangladesh
Great video, good as new.
Parabéns pelo seu trabalho , um belo martelete 👏👏👍🤝🇧🇷🇨🇮
Namlu yayını ters takmasının dışında bi hata yok mükemmel işçilik 😊
Like a new one!!!!Brilliant!
I have a challenge for you:
Restore the case!!!😂😂
Thank you! I restored it behind the scenes
Great job
awasome.congratulations.
Thank you sir 👍 Hello from #Makita® Viet Nam 🇻🇳
You're amazing.😃👍
AWESOM, GREAT JOB THANKS.
You're welcome, thank you!
Nice job keep them coming from the Uk
Thanks, will do!
Gear show you are the best
I appreciate that!
The Meat Loaf song comes to mind, I’d do anything but that. A epic breakdown and reassemble.
براڤو ممتاز جدا وروعه تسلم ايدك ❤
Super Job.👍👍👍👍
Thanks to upload video 👍👍👍👍
Комментарий в поддержку канала и ролика, а также труда мастера.
Еще раз спасибо! Я рад, что вам нравится этот контент.
Pretty cool.
Good job
nice job
good job bro
Maravilloso video
BRAVO.
MANI ESPERTE, PER UNA BUONA RIPARAZIONE E MANUTENZIONE DELL' UTENSILE.
SALUTI
SALVIO
ah, the 3ah batteries... they were the most popular for a while, we had them around 2012
Nice job. Not everyone, will show they're results with real testing after restore the tools. But I heard Makita not good at this days. What do you think about that?
I don't know about new tools, but all the vintage tools are good.
Love you sir from Pakistan
good job
you are creative
What spray did you used for plastic housing? Some clearcoat? Satin/matte/petrol-resistant/for plastic?
It is flat clear spray.
Nice 👍
that's awesome
Nice video bro
Good man , Good job ,
Buen trabajo Donde puedo conseguir un simple chárger?
what spray paint did u used for power tool case?
Really super
Hello Gear Show. Great movie! How much did this hammer drill cost?
Mantap bro 👍🙏
По ходу, можно было просто щётки поменять... 💁♂️🤦♂️🙆♂️
Nice
Best bro...
Why did you install the spring in reverse? Any reason to do that?
It is my mistake, I just realized while I was editing the video.
nicr restoration
I have the same one. unfortunately it doesn't work well. after 10 seconds of operation, it starts to overheat and loses strength. it overheats in the area of the brushes and brush holders.
what could be the cause? gearbox and hammer already one
disassembled and the grease changed, but overheating continues.
the new brushes have changed and I had to change the brush holder because the old one melted from the heat
It might be the armature problem. Please check the armature. If the problem still not fix, you can check the switch.
Gratidão GearShow!
De nada
Makita look to be well made tools
เรียนถาม ใช้อะไรฉีด ก่อนลงแว๊ค ครับ
เป็นสเปรย์ใสแบบแบน ผลิตในไทย
@@gear_show ยี่ห้ออะไรครับ
where do you get these tools from
I get these tools from a recycling store.
nice restoration but i think its better to replace the motor with brushless type
That is a great idea, thank you!
Hi what was the silver drill you used WOW
what problem did you have?
Makita is the stuff dude's
🤩
what's that spray?
Wow
Sangat suka aku dengan pemulihan makita
Aku senang kau menyukainya.
where to buy this moter
Watt amazimg
Thanks
I have 2 of these, one 2008 never used, the second 2017,in the work
💯👍
technics turnplayer cover? :) Hii from Turkey
👍