@@gear_show But when the engine is modified, it becomes weaker than it was, so it is preferable not to modify it and make it as it was. There are many repairmen who do not do this for this reason
I love this, the voltage convertion was a master piece, It would be nicer a more elaborated adaptation to the battery and a cover for the exposed wires, consider 3d printing 👌
14:30. When I saw these armature rings, I immediately remembered how we used to throw shaped transformer plates in childhood. They were in the form of the Russian letter "Ш", or "E". 😄
Other than perhaps a bit better cable management from the handle to the battery, you've done an excellent job. I'd have sleeved the wires into one flex, grommeted the hole they emerge from or, indeed, routed them out of the smaller hole @ 28:38 and blanked off the large aperture at the bottom. Still, definitely a 9.5/10.
so scary powertools with full metal expose like that with no rubber coating, and its electric AC to, you bassicaly play with your life using a tools like this, convert it to dc will be safer from electric shock
You're supposed to melt that plastic pole. The one that came through nickle plate. It's there to lock the metal in place. I used low temperature solder with old tips.
nice but you should not use plastic to "Insulate" the windings.. you should use insulating paper that is designed for it you run the risk of it heating up and melting and sticking causing a short with prolonged use.
Thats a lot of work. I have a drill very similar i found it in a dumpster i dont that i will power it from the mains i think it s dangerous beacause of the metal body maybe i wil something steampunk from it... i have one guestion what that that one cluch do?
Q: Do you have to tamper with the motor in order for it to work with a battery, I have added a battery to my corded Strimmer to make it cordless, however, it doesn't give the same power?
Thank you for great video bro. 21:20 I need your help. I use RS 775 and its wires broken high voltages. What did use this liquid glue for secure wires? I find a glue, Permabond 920 but is it very expensive.
Interesting project. But was it worth? I mean, there is really lot of work you did. Anyway when you testing drill on different materials like wood there is no question. When you drill concrete, I see a low performance in this case. And there is not showing drilling metal plates. Good job anyway. Good luck!
The battery can be used with the original power tool, so It can't count into this project cost. I do this project for learning and showing. The vintage mechanic structure is designed not so good, that why it performs not so well. Anyway thank you!
@@gear_show the drill is designed with 100V so maybe your initial test with 200V+ AC broke it? these vintage makita hammer drills are surprisingly durable and ppl are still using them practically today.
Gear Show rewinding the armature, thats more like it. Loved it.
I'm glad you love it, thank you!
@@gear_show
But when the engine is modified, it becomes weaker than it was, so it is preferable not to modify it and make it as it was. There are many repairmen who do not do this for this reason
It looks like the spot labeled '12v' on the circuit board wasn't soldered down like the rest. You can see it at 3:47
also didnt add a grommet where the power cables go into the (metal) body
always one to pick a fault
People who spot potential problems are much better at their job than those that just sit in awe.
The proper use for a 50mm socket 😂
I was feeling restless for some reasons this restoration video calm me down
This was excellent. You really went all out. Love the result. 🥰🥰🥰
Thank you so much 🤗
I love this, the voltage convertion was a master piece, It would be nicer a more elaborated adaptation to the battery and a cover for the exposed wires, consider 3d printing 👌
Okay, thank you for sharing! I'm glad you love this content.
NICE BATTERY KIT I LIKE IT A LOT
Thank you!
Good work, I think adding the left and right direction key is necessary for this work
14:30. When I saw these armature rings, I immediately remembered how we used to throw shaped transformer plates in childhood. They were in the form of the Russian letter "Ш", or "E". 😄
Oh, you have a good childhood memories. Thank you for sharing!
@@gear_show Thank you for amazing work and video montage! 🙂
I`m one of your biggest fans! Every video is a masterpiece. Really grateful you`ve inspired me to do a lot of my own projects.
Thank you for away come to this channel! I'm glad you like those contents.
wish i had the patience
Да. Хорошая и серьёзная проделана работа. Удачи вам. Ну и конечно лайк
Лови плюс! Я бы оставил 220. Эта серебристая краска быстро сотрётся. Инструмент сделан на века !
Спасибо, что поделились!
You are genius to make these kind of things sir❤️❤️❤️
Thank you so much!
どうもありがとうございました、私はあなたのコンテンツにとても満足しています。
どういたしまして！ あなたがこのコンテンツを生きてくれてとてもうれしいです。
What a wonderful restoration and you are very hard worker thanks for the sharing this video and nice restoration good work sir 👍👍.
Thanks for change Table sheet Gear show Very Excellent work Brother
My pleasure, I'm glad you like it.
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
My pleasure, thank you!
Wow that amazing job and you have a great experience too
Thank you!
very good👍👍
Thank you!
Excellent work with useful tools and techniques.
Other than perhaps a bit better cable management from the handle to the battery, you've done an excellent job.
I'd have sleeved the wires into one flex, grommeted the hole they emerge from or, indeed, routed them out of the smaller hole @ 28:38 and blanked off the large aperture at the bottom.
Still, definitely a 9.5/10.
I'm so glade with your feedback, thank you for sharing!
Щетки у моторчика нужно было поменять на медно-графитовые, с низким сопротивлением, которые расчитаны на большой ток.
Спасибо за контент!
Хорошо, спасибо за советы!
Awesome… very beautiful 👌
Fully watched 👍👍👍👍👍
Thank you so much 😊
Great craftsmenship !
Thank you!
Me encanta tu trabajo y conocimiento.....siempre estoy pendiente de tu videos.....gracias
Me alegra que te guste este contenido.
A masterpiece, in a masterclass, by the master ! Hey dude, you rock !!!!
نبويو ت
Thank you! I'm glad you like it.
I really enjoy your conversions.
Glad you like them!
Very impressive G.S... Nice video...
Thank you!
Please a Quick-release chuck and a brushless motor
so scary powertools with full metal expose like that with no rubber coating, and its electric AC to, you bassicaly play with your life using a tools like this, convert it to dc will be safer from electric shock
nice build
Thanks
The motor laminations will produce eddy currents because each lamination wasn't isolated electrically with varnish etc. But overall great work!
Another great video and i like the sound! 👍
U forgot to solder the 12v signal on the battery module at 3:25 . Nice videos!
Yes, thank you for the feedback!
Oh man! I love your videos
Great job, thank you brother. You are so talented
I appreciate that!
THANKS GREAT JOB
You're welcome, thank you!
cool project but idk if its too fit for masonry. hammer drills can do it but its slow compared to a sds rotary hammer
Because the old mechanic structure.
Nice, looks SF, like a fallout experimental weapon :)
Yes, thank you!
very good
Thanks
Fantástico trabajo !
Gracias por compartir.
¡Denada gracias!
Great job as usual but the motor seems to be not powerful enough for this drill?
Yes, it is less power than original.
I’m your fan. Excellent job
Thank you my fan :)
The japan script says it's makita, i guess that's the brand
Okay, thank you for sharing
Nice job, good content! 👍🏻Thanks! 🌹
Thank you very much!
allways good thanks
Always welcome
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Amazing video ❤️
You are so kind ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Świetna robota 👏👍😎
You're supposed to melt that plastic pole. The one that came through nickle plate. It's there to lock the metal in place.
I used low temperature solder with old tips.
Okay, thank for the tips
really beautiful great job thank you
Thank you! 😊
excelentes videos compa bendiciones , sigue asi dando videos chingones , saludo desde martines de la torre ; veracruz , mexico.
good job... 👍👍👍
Thanks
Have you ever done the math to see how much more powerful your mods have made tools like this one?
When I was studying physics, I knew how to calculate its force.
Parabéns pelo vídeo. Faz um vídeo explicando com Faz a ligação da bateria 🔋
Türkiye den selamlar 🇹🇷🇹🇷
It was really great
Thank you!
Beautiful job.
Thank you so much 😀
أحسنت يا مبدع استمر
شكرًا لك! أنا سعيد لأنك أحببته.
Well done. 👍
Thank you! 👍
Nice job 👍🇮🇩🙏
How will you stop the drill for draining the battery cells all the way?
Trabalho de mestre! Gratidão Gear Show!
Muito obrigado!
Wow! Your job is amazing.... I need to know... how did you remove the rust and the grease?! that must be difficult
I like to disassemble things as well but I never put them back since I don't remember what part goes where 🤣🤣
After you watch my videos, you will can do it
Some math to why you take the winding you do would be very helpful to redo this oneself.
Otherwise great video!
nice but you should not use plastic to "Insulate" the windings.. you should use insulating paper that is designed for it you run the risk of it heating up and melting and sticking causing a short with prolonged use.
Yes, you're right. Thank you so much for sharing!
Có mô tơ 18v đc sao anh ko thây, mà quấn như vậy thì làm khó em quá.hehe theo dõi anh đã lâu
Mo to 18v loại mạnh nhất là 895 cug ko mạnh bằng mo to quấn lại này nên họ quấn vẫn hơn .
Olá, dar pra modificar a bobina de campo também, pra não colocar imãs?
What is the name of the company that made this drill?
Thats a lot of work. I have a drill very similar i found it in a dumpster i dont that i will power it from the mains i think it s dangerous beacause of the metal body maybe i wil something steampunk from it... i have one guestion what that that one cluch do?
Becarefull with all aluminum tool.
Îmi place foarte mult.
نسأل الله العظيم ان ينصر اخواننا في فلسطين
I Don't Even Bother Rebuilding Batterys.
I Just Recycle Them.
Nice 😊
Thanks
Nice !
That's a very nice
Thank you!
Q: Do you have to tamper with the motor in order for it to work with a battery, I have added a battery to my corded Strimmer to make it cordless, however, it doesn't give the same power?
Did you change the motor?
@@gear_show no i have not
So i take it motor requires changing for it to work?
What was the blue component marked as z08, a bridge rectifier ?
Which part of the video? Could you please point it
Very nice ! ...but one question... How you calculate number of spire?
I follow DC armature 18V
Thank you for great video bro. 21:20 I need your help. I use RS 775 and its wires broken high voltages. What did use this liquid glue for secure wires? I find a glue, Permabond 920 but is it very expensive.
It is A&B glue.
Все очень круто, но не тонкие ли провода питания от аккумулятора к дрели? Потери в них будут(((
does the additional turns give you more torque or higher voltage range?
жидкое крепление аккумулятора!! Можно было в алюминиевом корпусе сделать
Good job
Where can I buy the battery case. the link I can't find yours in the description link does not work
Винтажный киберпанк)))
Да спасибо!
Crazy!!
Use dc switch or 30a relay with normal switch
Switch u are using will not handle >2 amps current because it is made only for AC current load
Okay, thank you for sharing!
Interesting project. But was it worth? I mean, there is really lot of work you did. Anyway when you testing drill on different materials like wood there is no question. When you drill concrete, I see a low performance in this case. And there is not showing drilling metal plates. Good job anyway. Good luck!
The battery can be used with the original power tool, so It can't count into this project cost. I do this project for learning and showing. The vintage mechanic structure is designed not so good, that why it performs not so well. Anyway thank you!
The battery looks like a sore thumb. Other than that, nice conversation/restoration.
ممنون وخداوند خیرتون بده
Cok guzel oldu ama o makina da elektrik şart eline sağlık
Bu aleti elektrikle kullanmak güvenlik değildir.
hero!
:D
Sir can I upgrade 12v battery to 16v for my china makita drill if any problem or not.
i thought you are going to use a SDS chuck
How come never post product links? Where can I get those battery cells?
👍👏 отлично
Did you input 100V in the beginning?
What is the current or power of the new motor?
I didn't test with 100V in the beginning, I know the original power by the label.
My multimeter can't measure the current of the new motor.
@@gear_show the drill is designed with 100V so maybe your initial test with 200V+ AC broke it? these vintage makita hammer drills are surprisingly durable and ppl are still using them practically today.
👍👍👍 mantap
Thanks
Dope💯
Really..
@@gear_show What do you mean by "Really.." ?
can you restoration for electric die grinder? or mod it into battery
I'm not promise, but I noted what you want. Thank you!
Bravo 🤠🏆🇧🇷🇧🇷👏✍️
Thanks