How to remove and install driver blend door actuator on 2015-2019 GM Sierra 2500 Not cold on driver!
ฝัง
- เผยแพร่เมื่อ 23 ต.ค. 2021
- Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com/@jvfix?lang=en
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!
===================================================================== - ยานยนต์และพาหนะ
![USAB Showcase: CANADA vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/m9Cz3xsdDgc/mqdefault.jpg)
Been searching for days to find a potential fix for my wifes 2018 Suburban which has decided to only blow hot air from all the front vents, rear vents still blowing cold. This video is on point because now I know how to troubleshoot before buying new actuator(s) and can potentially get her some relief. Thank you!
AWESOME VIDEO!!!! You saved me hours and hours of time. We service 20-30 cars a day, and all of the mechanics were impressed with replacement time. You are the real deal.
THANK YOU
You're welcome! yea i have replaced many of these so yea i have a bit of practice already lol, but the first time was so hard.
Dude, your video was firing on all cylinders! Thank you!
thanks for watching
Great video! I got my part on amazon for like $35 bucks, I used a micro flex head ratchet with a torx bit. Worked right after plugging everything back in.
Nice work!
Best explained and detailed video i could find ,thank you
Glad it was helpful! thanks for visiting the channel
Thanks for posting. This really helped
glad it helped. thanks for watching
Great video brother now i understand how it works n how to fix it
thanks for watching
Thanks for the vid brother!
no problem.
Really informative video very detailed. My 2014 was not getting hot on the passenger side
thank you and thanks for watching
Thank you for this video
no problem
Good guide and replacing the actuator fix my issues. But wow that project sucks
yea it's abit hard to change it. thanks for watching
Awesome video! Thank you for sharing! How can you rule out these units are the cause of just hot air blowing? My ac blows hot air no matter what temp settings I set it on? Thanks.
if no cold air first check if your ac line gets cold and fan and compressor working. if all Is good just remove the door motor and u can move the door by hand. most of the time the problem is the blend door motor but is good to check first.
Thanks
Welcome
Could this also be a solution if i only have air blowing though defrost?
yea you probably have a bad one too
Great video, in the meantime i could just push the actuator flap manually for cold air right?
Yes you can!
I’m not fully understanding the actual removal process probably because it’s difficult to get a camera up there but when you’re removing it the gears need to be pushed all the way into the cold position. Then the actuator can come out and the new one can go in. But if the actuator isn’t going into it’s gears, you would need to manually push it?
yea you can manually move it
Once you swap and set the and set the other the bad one on cold, will it still blow cold air?
yea I did this test just to confirm if the actuator was bad.
When you replace the actuator do you habo to program something or it’s just like changue the piece?
no no need to program anything
My truck is stuck on defrost do you have any videos on that?
yea it could be the same issue both motors are used for either temperature or door position
How do you get the bottom plastic piece off? A lot of things you removed off camera. I don’t want to break anything. lol
u need a 5.5m socket to remove the bottom cover is very simple
Would removing the radio be a lot easier or there no way to get to it from their?
it could I haven't tried it
My AC blows mostly through the defroster . Could replacing the actuator fix the problem ? Thanks in advance
the one i changed on the video is for the temperature but in your case the one that actuates the doors could be going out.
Tengo una 2014 chevy silverado texas edition el chofer avienta frio y el pasajero caliente y revise y tengo el mismo problema en tu video pero ya puse el nuevo motor y todavia se keda atorado con 3 dientes afuera no gira todo completo para el frio que mas puede aser
pusiste motor original o aftermarket?
@@JVFIXLLC lo compre en autozone pero parese que no son originales me dijieron que si tienen que calibrar con un scanner
So no need for a scanner tool to recalibrate correct?
yeap no need for that
In a 2014 Silverado is it in the same place?
yeap same location
@@JVFIXLLC 👍
Donde te encuentras para servicio?
estoy en el area de visalia California
Necesitas desconectar la batería ?
no no se ocupa desconectar
@@JVFIXLLCthanks gracias amigo tengo la misma pregunto lo boi intentar
How did you remove the last one
the one behind the glow box is the hardest but the one at the bottom is only 2 screws size 5.5mm or 7mm I think
My dealer wants 2k.. 😅😅😅
what? how? that's insane
how much does a job like this cost ?
I charged 150 for this job.
Muy completo el video!! Gracias!!
gracias por visitar el canal. saludos