This was possibly the most beautiful thing I've see on TH-cam. I was brought to tears. Better than 12 months in an isolation tank with every book that Orwell scribbled. Wow.
I want every car this guy has. I'm just starting out with three 1/10 scale Rcs. One I bought because of Kevin! The 1/10th scale Rampage Kevin reviewed a while while Already had to buy replacement parts for one of my cars. Love this hobby!!
Metal upgrade and brushless!!! Please!!! Got the same as my first car and upgraded the shocks at first. It isn't not so soft and jumpy anymore!!! Go keV!!
it's a POS with plastic differental gears and weak ass screws to hold in the out put cups...it's been known to give people plenty of headaches. .It can nickel and dime you to death He 'll be better off slapping a 3650 in the wl 10428 1/10,. Race it against a traxxas.lmao
OneEyE Monster correct, Virhuck and Feiyu clones have the metal diffs in them, I know the Virhuck V-01 is powered by a 390 motor, grabbed one when they were 42 bucks in eBay. cut 1.5 turns off all 4 springs (flatten new ends), gave it shock seals and oil (30wt rear 80wt front), 100mm tires and a 10T pinion because they ARE top heavy and too fast for their own good... it's MUCH better suited to being a trail crawler/bouncer/climber, not a fast bash around. the simple shock mods allow more+easier flex, and a little bit of negative suspension travel in the mix helps keep the wheels to the ground more often. sure I took away 55-60% of its top speed, also saves the stock motor+ESC from thermal shutoff or burning up. Kevin is cool, but he likes FAST lol. 12428's motor mount is more difficult to use different pinion gears too.
@@klimenz it is when it;s still a POS with weak ass screws that will snap. It's a RETARDED design. The subotech 1/12 4x4 has all metal diff ..with C lips. like a regular beefy hobby grade...metal. drive lines..which I got for only $35 NIB..It goes for around $50.... Even the dogbones are bigger than my 1/10 redcats pros.... it has as the same width as the 1/8 corvett newbright. I made a chassis for it....install a BRUSHLESS 2845 3300 KV 3s 40C. Use stock fy03 wheels and tires....it'll do 40 mph.lmao since I got a couple of volcano PROs for only $108-es NEW...I extended the chassis to 16" wheel base on one of them..Mounted those big arss wheels with maga offset from the subotech.. It's 13" wide Not as fast as an OX...it's 1/7 4x4...22" long with body.... that'll do over 45mph for only $110.lmao...waiting for the 3s 50 5000 packs to get here...it might do 50mph....The damn tires came un glude when I tested this morning.lmao
Bought 1 of these based on the review/videos on this channel and I love it. Currently waiting on some new oil shocks to be delivered so I can do my first upgrade.
I have one of these as a rainy day kind of toy and I've been happy with it ever since. Only thing I broke was the rear pinion gear after doing wide open reverse pulls and slamming the controls forward. I don't think there is anything else as durable as that for under 100 dollars
I think adding oil to the shocks will help a lot with future damage, everytime you jumped it you can hear it’s frame/chassis smacking the ground and that’s not good for the motor or the other parts like the skid plate/chassis
Thanks a lot Kevin i bought this RC and it is overheating verry much so i ordered a cooling fan and didnt know how to remove the chasis so this video helped me out
I'm glad this video was made before I got mine because my driveway tore up my chassis and now the gear is exposed, front diff is gone, and I broke an inner 4 link mount on the rear axle on a really twisted jump, I'm using a BMX ramp similar to what you used in the review but that's the fun in the hobby is breaking it and fixing it only to break it again, it's a money pit but it's fun
I'd like to see you mod this. I'm gonna try and put some away pars on the back to see if that'll improve the performance but I'm kinda scared thinking of popping brushless into it without destroying it with the first Max throttle ;)
Either that or take pictures of it as you take apart. Or as you pull apart put screws back in holes as long as they don't get in the way of the disassemble part.
this has to be the best rc channel on youtube also when is the trx4 rebuild coming out and could u also put a new bash body on the trx4 like a bronco keep up the bashing
I've owned my 12428 close to 2 years. I've upgraded the shocks to oil filled and the rear differential to steel. It was £48 from eBay one of the greatest value rc about
The video was very nice. But if I were you I would have changed it I would have just glued the cracked part although the repair was lovely, nice and neat . I have been trying to buy one if this online but I am short if cash so instead made one exactly like the wl 12428
My brother will probably buy one of these and I think I should put my old 540 torque tuned motor in it and see how crazy it will be. And I’ll probably put some oil in the shocks.
Bosch is easy to find here in the states. Can go to the local hardware stores and find them no problem. I just have never seen that hot glue gun, but then again I didn't even know one like that existed.
The motor mount screws were superglued on mine. I applied the old solder iron to them and managed to undo three, but the fourth sheared off at the mount. I'll have to drill it out I guess.
I cant believe you did not break the rear drive shaft, i broke the stock one, bought 2 just in case. Have more drive time on the replacement than the original one. Mine has been in thick mud, sandy beach, in the water and snow, and steering servo is the only thing that has quit besides breaking the driveshaft.
A bit late I know Kev, but if ur impressed with this cool rc car then anyone would be too, ur one of the hardest testers on rc cars anywhere so for me this car will last for yrs 👌, only one question, do the wheels run on bearings or teflon bushes ?, im realy hoping bearings
we have bosch all over the place in canada. pretty sure americans do aswell. but the european tools are made higher quality then the ones we get over here
hey bro i like your videos very much.keep it coming.a big thumbs up. further please please do a review of FS Racing 53632 Brushless 1/10 4WD EP&BL BAJA Buggy and himoto bowie monster truck brush less version. please i beg you :) because i am going to buy one of it and also mention which one is better pros and cons. thank you so much in advance.
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
2nd
Argh!!!! I wasn’t first haha!
Subscribe!
282,478th!
375,713th he he
This was possibly the most beautiful thing I've see on TH-cam. I was brought to tears. Better than 12 months in an isolation tank with every book that Orwell scribbled. Wow.
Just bought one of these for my son and I am so impressed!! U should have put oil in the dampers when you had it apart.... Great videos 👍
I want every car this guy has. I'm just starting out with three 1/10 scale Rcs. One I bought because of Kevin! The 1/10th scale Rampage Kevin reviewed a while while Already had to buy replacement parts for one of my cars. Love this hobby!!
Metal upgrade and brushless!!! Please!!! Got the same as my first car and upgraded the shocks at first. It isn't not so soft and jumpy anymore!!! Go keV!!
Haha same thoughts here
it's a POS with plastic differental gears and weak ass screws to hold in the
out put cups...it's been known to give people plenty of headaches.
.It can nickel and dime you to death
He 'll be better off slapping a 3650 in the wl 10428 1/10,. Race it against a traxxas.lmao
OneEyE Monster correct, Virhuck and Feiyu clones have the metal diffs in them, I know the Virhuck V-01 is powered by a 390 motor, grabbed one when they were 42 bucks in eBay. cut 1.5 turns off all 4 springs (flatten new ends), gave it shock seals and oil (30wt rear 80wt front), 100mm tires and a 10T pinion because they ARE top heavy and too fast for their own good... it's MUCH better suited to being a trail crawler/bouncer/climber, not a fast bash around. the simple shock mods allow more+easier flex, and a little bit of negative suspension travel in the mix helps keep the wheels to the ground more often. sure I took away 55-60% of its top speed, also saves the stock motor+ESC from thermal shutoff or burning up. Kevin is cool, but he likes FAST lol.
12428's motor mount is more difficult to use different pinion gears too.
@@oneeyemonster3262 £7 for a full set of metal gears. Hardly a fortune
@@klimenz it is when it;s still a POS with weak ass screws that will snap. It's a RETARDED design. The subotech 1/12 4x4 has all metal diff ..with C lips. like a regular beefy hobby grade...metal. drive lines..which I got for only $35 NIB..It goes for around $50....
Even the dogbones are bigger than my 1/10 redcats pros....
it has as the same width as the 1/8 corvett newbright.
I made a chassis for it....install a BRUSHLESS 2845 3300 KV 3s 40C.
Use stock fy03 wheels and tires....it'll do 40 mph.lmao
since I got a couple of volcano PROs for only $108-es NEW...I extended the chassis to 16" wheel base on one of them..Mounted those big arss wheels with maga offset from the subotech.. It's 13" wide Not as fast as an OX...it's 1/7 4x4...22" long with body.... that'll do over 45mph for only $110.lmao...waiting for the 3s 50 5000 packs to get here...it might do 50mph....The damn tires came un glude when I tested this morning.lmao
Good repair. A chassis broken is the most time consuming breakage. I like your optimism.
You're magnet trick really helped
Bought 1 of these based on the review/videos on this channel and I love it. Currently waiting on some new oil shocks to be delivered so I can do my first upgrade.
I love when he speaks
Omg,, lol. 8sSteve shatting his pants was too much . Genius kev....lol. good tip for remembering where screws go. I do the same.
I think the Rc intentionally tried to break its nose so it couldn’t smell 8s Steve’s fart! 😂
Now that's funny
STEVO D 313 Nice joke 😂💯
Lol
God comment
Hey Kevin, love your work and the amounts of time you take to make these awesome videos for people that you don't even know! Keep Up The Good Work!
Thanks man, evern this little vid took around 8-9 hours to make
I really like the special choice of music
for the scenes :D
Your committment to the hobby is awesome. Same effort for this thing as the arrmas
😃👍Those WLtoys 12428 are great for the $ ...lots of screws though to take it apart...awesome glue gun! 👍BEAUTY!
You had so much fun with it that I bought one. Awesome little buggy, fast and fun!
Good job on this video, I will definitely get one! I was convinced after watching your first video review. 👍👍
Suggestion buy all the parts then assemble one with only the bought parts
Cash?
It will be slightly more expensive and not include the remote and battery..because manufacturers get profits from selling spare parts too..
Wow this thing is surprisingly well built!
Hi Kev I got one coming tomorrow. I appreciate your video. It made my discussion easy . Way to go bruv!
“It’s alive again!”
*_thud_*
I have one of these as a rainy day kind of toy and I've been happy with it ever since. Only thing I broke was the rear pinion gear after doing wide open reverse pulls and slamming the controls forward. I don't think there is anything else as durable as that for under 100 dollars
Bought my 4yr old one for Christmas. Might end up opening the package b4 Christmas and check it out lmao
Hay Kev great review my son is ordering one this weekend.Sure is worth the money.God Bless Stay Safe Stay Healthy.
I think adding oil to the shocks will help a lot with future damage, everytime you jumped it you can hear it’s frame/chassis smacking the ground and that’s not good for the motor or the other parts like the skid plate/chassis
Great vid Kev! Not sure why, but i love that little truck!
Great music too....I may watch again just for that
I know what Im gonna get for my birthday now!
GOOD JOD KEV it would be great to go to your shop,
Your thrashing of this car just made me but one. . Thanks Kev. Love your show . Old or new
I was really enjoying the music.
Thanks a lot Kevin i bought this RC and it is overheating verry much so i ordered a cooling fan and didnt know how to remove the chasis so this video helped me out
I'm glad this video was made before I got mine because my driveway tore up my chassis and now the gear is exposed, front diff is gone, and I broke an inner 4 link mount on the rear axle on a really twisted jump, I'm using a BMX ramp similar to what you used in the review but that's the fun in the hobby is breaking it and fixing it only to break it again, it's a money pit but it's fun
its simple and complicated at the same time but mostly simple, thumbs up if u agree
OMFG THAT WHIP AGAIN🤣😂🤣😂LOVE YOUR VIDEOS DUDE.
I have one of them. But with MAD upgrades
Nice video 👍 not a bad rig 😎
ready to bash again! looks good kevin!!
lol kev, dont forget how big a company bosch is lol :) great vid as per and i do like a bit of peter and the wolf :)
I'd like to see you mod this. I'm gonna try and put some away pars on the back to see if that'll improve the performance but I'm kinda scared thinking of popping brushless into it without destroying it with the first Max throttle ;)
U r very talented. Love the glue gun also. Thanks 4 video!
Sir just one thing
Your great .
Love your videos cant wait to see you fix the rustler
Either that or take pictures of it as you take apart. Or as you pull apart put screws back in holes as long as they don't get in the way of the disassemble part.
AWESOME video Kevin.I picked one up an that baby is agile an plan on doing some more mods,thanks.
this has to be the best rc channel on youtube also when is the trx4 rebuild coming out and could u also put a new bash body on the trx4 like a bronco keep up the bashing
Can you imagine how good this car will be with an alloy chassis
Too rigid it will break. Its secret is having soft flexible parts
The way I would drive this thing around so frugally, it would probably last a long time for me
Same here. :)
I've owned my 12428 close to 2 years. I've upgraded the shocks to oil filled and the rear differential to steel. It was £48 from eBay one of the greatest value rc about
DIMITRIOS GYLTIDIS ah man £48! I can’t find any less then £70 atm and they are in China :( lol
@@perfektrepairs7934 I bought it from ebay UK
DIMITRIOS GYLTIDIS must be because of Xmas they have gone up
I like your RC videos
These little things are kinda impressive. 3 runs in a row at the skate park with my Rustler and 3 inexpensive but time consuming repairs 😂
before i buy a rc car i just watch your video is this good for my first rc car
Cool video kev!!!!!
The video was very nice. But if I were you I would have changed it I would have just glued the cracked part although the repair was lovely, nice and neat . I have been trying to buy one if this online but I am short if cash so instead made one exactly like the wl 12428
Best youtuber in my books!👍
thanks dude
It's so flexible and light that it almost can't damage itself
Frome the time i started waching the vid to the end he gained 1000 more subs.
My brother will probably buy one of these and I think I should put my old 540 torque tuned motor in it and see how crazy it will be. And I’ll probably put some oil in the shocks.
Bosch is easy to find here in the states. Can go to the local hardware stores and find them no problem. I just have never seen that hot glue gun, but then again I didn't even know one like that existed.
Thx for the idea of fixing a smartphone to the Controller... I just drilled a hole to my Sanwa MX-V...
keep it up kev
great job
The motor mount screws were superglued on mine. I applied the old solder iron to them and managed to undo three, but the fourth sheared off at the mount. I'll have to drill it out I guess.
Love the music montages 🧔🏻👌🏻
Awesome I think it's unbreakable I've got 2 10th scale
You are the best
Well done kev a nother good vid
I cant believe you did not break the rear drive shaft, i broke the stock one, bought 2 just in case. Have more drive time on the replacement than the original one. Mine has been in thick mud, sandy beach, in the water and snow, and steering servo is the only thing that has quit besides breaking the driveshaft.
good work kev!
That’s a good car
Next vid you should do is to put in a brushless motor and put oil in shocks on the WL toys, and see how crazy it will do
A bit late I know Kev, but if ur impressed with this cool rc car then anyone would be too, ur one of the hardest testers on rc cars anywhere so for me this car will last for yrs 👌, only one question, do the wheels run on bearings or teflon bushes ?, im realy hoping bearings
Bearing if I remember correctly
@@KevinTalbotTV OK thanks so much Kev ✌
Gosto muito do seu canal
RC car costs 90 dollars now
Awsome video 😅👍
Do more about wltoys a959 videos
yeeeey.....knew video from kev
You should but the aluminium linkage and joint upgrade and put it on
Good vid by the way
You should get you a crawler like a wraith or a yeti
Awesome thought about getting one but ended up getting a FS racing truck from banggood
You should put a brushless moter in it
It's a scaled down Vaterra twin hammers omg, besides the fact that the twin hammers have a 2speed transmission
Nice video i reckon you should get a rc boat
nowhere near me to use one dude
Did you get a hangover LOL. Hey Kev did I miss the cheetah verse the Bison? Or is that coming up? Funny video yesterday :-) you in rare form LOL
Thanks
Yeeees The best
we have bosch all over the place in canada. pretty sure americans do aswell. but the european tools are made higher quality then the ones we get over here
there's a lot of torque twist maybe some swaybars
every time i see your videos I go look at my RC car and try to fix it
Nice.
Please install brushless motor .
best regards.
Sweet
Looks very expensive look forward to get one
I'm so surprised on how much aluminum parts you can buy for these things it's crazy.
Replace the off and on switch that's on the body that's underneath to somewhere else to get to
You should try out the cruler in Amazon
wow im early this time great video!!!!!!!
hey bro i like your videos very much.keep it coming.a big thumbs up. further please please do a review of FS Racing 53632 Brushless 1/10 4WD EP&BL BAJA Buggy and himoto bowie monster truck brush less version. please i beg you :) because i am going to buy one of it and also mention which one is better pros and cons. thank you so much in advance.
When you gonna take the notorious to the skatepark?
no set date but i will