Everyone points out to trigger the gun before unscrewing the fluid nozzle to prevent scratching the needle; but neglects to mention NOT to leave the fluid dial to 0 as the needle doesn't retract into the nozzle at all at that setting
I have 3 - I like them HOWEVER. I'm having a problem lately with leakage under the rim of the cup. Very frustrating. No matter how perfectly I clean it> Any tips?
Hi, if by cleaning it, the issue continues to appear, try with an other inside cup. And if the problem persists, maybe you'll have to replace the flexliner completely. Kind regards, Airless Discounter team
@@AirlessDiscounterInternational Well I solved the problem. I Was getting in the bad habit of filling the material higher than the outside line~ and that’s why it did not atomize and leaked under the rim. Thank you though for your helpful tips.
Hi there, thank you so much for watching. We sorry to hear the hose whip is splitting - is it happening in the same place, top of the hose near the gun? or closer to the main hose? The HVLP Edge II Plus gun pricing (with delivery) can be found here: www.airless-discounter.de/Graco-HVLP-EDGE-II-PLUS-Spray-Gun-with-1-Liter-FlexLiner-System-17P483
Not necessarily. And it only costs €1,820.00, not more. Link: airless-discounter.de/Graco-TurboForce-II-FinishPro-HVLP-PROCONTRACTOR-95-17P532_1 Kind regards, Airless Discounter team
Darren you could sell me water if I lived by the sea great videos buddy
Everyone points out to trigger the gun before unscrewing the fluid nozzle to prevent scratching the needle; but neglects to mention NOT to leave the fluid dial to 0 as the needle doesn't retract into the nozzle at all at that setting
I have 3 - I like them HOWEVER. I'm having a problem lately with leakage under the rim of the cup. Very frustrating. No matter how perfectly I clean it> Any tips?
Hi,
if by cleaning it, the issue continues to appear, try with an other inside cup. And if the problem persists, maybe you'll have to replace the flexliner completely.
Kind regards,
Airless Discounter team
@@AirlessDiscounterInternational Well I solved the problem. I Was getting in the bad habit of filling the material higher than the outside line~ and that’s why it did not atomize and leaked under the rim. Thank you though for your helpful tips.
Nice gun i sprayed with this gun awesome way better then apollo 7500qt
We enjoyed it too!
The whip hose on my Graco 9.5 keeps splitting. Is there an improved version for sale ?
Also, how much is a replacement gun ?
Hi there, thank you so much for watching. We sorry to hear the hose whip is splitting - is it happening in the same place, top of the hose near the gun? or closer to the main hose? The HVLP Edge II Plus gun pricing (with delivery) can be found here: www.airless-discounter.de/Graco-HVLP-EDGE-II-PLUS-Spray-Gun-with-1-Liter-FlexLiner-System-17P483
can you put a female plug on this gun
Hi,
The air hose is female. Regarding the entrance of the gun, you can't change it.
Kind regards,
Airless Discounter team
over priced for what it is, 5k in nz, you can buy a 395 air assist and get better results
Not necessarily. And it only costs €1,820.00, not more.
Link: airless-discounter.de/Graco-TurboForce-II-FinishPro-HVLP-PROCONTRACTOR-95-17P532_1
Kind regards,
Airless Discounter team
With this gun Is it possible to spray upside down?
Yes, you can spray upside down.