How To Swap to a Bigger/Newer Motor [04-12 Colorado Canyon & H3]
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- It's pretty simple...
04-07 will swap between years. NO modifications
08-12 will swap between years. NO modifications
08-12 motor in a 04-07 truck needs this ----- amzn.to/3JkwIat
plus this intake cam sensor ---- amzn.to/3oJ85uU
07 motor into an 08-12 truck needs this ----- amzn.to/3zj6wsf
A tune will help but is not necessary to run if you follow this guide.
Let your knowledge pay for itself Brother. Just stumbled across your videos. You earned a Follow
Appreciate it Larry. I enjoy making videos for you guys.
Awesome I haven't found to many people that know much about the Colorado trucks I have a 2.8 06
If I ever need a rebuild engine I’m coming to you. Great video!
I'd be interested in the possibility of a swap service.
I have an '05 Colorado with an i5. Bought it off a used lot, drove it for a couple months before the engine started making some noise and had to negotiate with them to get a usable engine swapped in...
Pretty sure it was a junkyard swap or had been sitting on a pallet behind someone's shop for a couple years. Ever since I've had the idea for another swap in the back of my mind.
For various reasons, I haven't wanted to pick a local rando' on the 'can you (generic) LS swap qualification' and wouldn't hate to have an option with more specific knowledge...
Thoughts on swapping an i6 into an '05? Further thoughts on turboing an i6? Or maybe twin sequential turbos?
I like my little 5 cyl. 200,000 miles and it is still smooth and leak free. 22 mpg on the highway on 31” tires isn’t too bad. that being said- the atlas 6 cyl would be pretty awesome. More power with inline reliability and the opportunity for good mpg sounds great.
I’m. In Decatur Illinois
Prepare to do quite a bit of frame, accessory relocation and body work to shoe horn that 4.2 I-6 into a first gen Colorado/Canyon/I-Series truck, a stock truck dues not have the engine bay clearance for that motor.(too short)
How do you get 22 miles to the gallon? Which rear end are you running?
I just went with the 5.3 LS swap.
Yep. Doing a 6.0 myself. Some guys just can't afford the swap, don't need the power, or just wanna stick with the 5cyl.
@@BadlandIndustries will you do a video on swapping in a 6.0 from a 3.5 in a Hummer H3....what would it cost...thanks
@@terryvaughn677 I talk though what im doing to mine throughout the build vlogs. Unfortunately there's so many ways you can do it there's really no one best way.
Intro was BANG ON! WHAT HAPPENED TO ME
I have a 2006 Hummer H3 3.5l and am needing a new motor. Correct me if I’m wrong but will the 2007 3.7l swap directly with no major modifications or would you just recommend dropping another 3.5l
Thanks for providing helpful videos!!
07 will be an upgrade and will install and run unmodified. You will benefit from a tune but otherwise it will work.
You aren't addressing the fuel return/supply difference between the 3.5 & 3.7. Also, the block, head, intake, and exhaust are different too. The fuel difference is the '04-'05 2.7 & 3.5 have fuel return to tank and the '06 has the later model regulated fuel pressure system. The '07 up 2.8 & 3.7 are all similar. It is easy to use the '06 engines in the '04 & '05 trucks by using the existing fuel system parts. Also easier to use the larger '07 & up engines in an '06 because of the fuel system parts. My '04 Canyon 3.5 5-speed is still running great at about 190,000 miles and I get 22-31 MPG depending on load & speed.
You can install the new motor and bolt up your existing fuel system, intake manifold, exhaust manifold and all that jazz and it'll run 100% fine. No you do not need to change any of these when upgrading the motor. You will however benefit from a tune.
I can build you a 3.7l out of a 2012 and have it drop into your 04 and will run on the first crank and you only have to swap the valve cover to the oil pan. Everything else on your truck will bolt up and run perfectly first try.
@@BadlandIndustries I did a valve job & replaced everything except the PS pump about 20,000 miles ago. It runs perfect & will last longer than I will. For fun my daily driver is an old Civic hatch w/K24. If I want to hotrod something it will be the Civic. The trucks primary job is to tow my fishing boat ant it does that perfectly as is.
@goldcountryruss7035 keep oil in it. The balance shaft bearings are the Achilles heel of this motor. Once they go, the cyl 5 con rod leaves the chat.
On my 4.3 liter engine there are a few wires that have no coating on them and they set on my carburetor.
I have a 4.3 liter vortex engine in my 94 Chevy Cheyenne I would like to have my fuel injectors and carburetor exchange for something much better.
It’s a great idea ! I’ve been looking at long blocks and there are none that’s inspire any confidence in me! My motor 05 3.5 115k has developed an intermittent metallic peck that sounds identical to an old small block with lifter tick. I would LOVE to have an ls but I’m on a fixed income and likely couldn’t swing the cost. I’d be needing to keep costs down but still get an ultra reliable motor. When you go through them do you fix any known issues to head off future problem? Are there any power boosters that can be done on the 3.5 during a swap? Thanks dude loving the content.
Jasper is ok but their price is higher than mine and they don't include oil pan or valve cover. So if your oil pump got taken out by the metal in the system then you now have to buy an oil pump on top of the motor.
The oil line I make helps but it's no substitute for low oil volume and the pcv consumption.
@@BadlandIndustries I sent you a message on your page some time ago about swapping my 3.5 for a 3.7 and if you’d be willing to do the swap.
@jeepinspence I don't really have the space or time to actually do the swap but I can absolutely get you a rebuilt motor. Where are you located?
Do it brother.... ill be sending you mine. 😁👍
HMU!
i'm in the process of pulling the engine out of my 07 H3, i'm hoping it's just a rebuild, finding a decen't replacement for this year is such a pain
Since you already have the parts you need on your 07 you can track down the 08-12 and swap the parts and add the sensor port.
that's probably the smartest option, finding an 07 engine that's worth the money isn't an easy task but there are so many of the newer years for a lot less@@BadlandIndustries
Hey, if u see this, id love to speak with ya on a rebuild / chip n programming for my 08 Colorado
shoot me an email
My 2007 Hummer H3 motor has 206K on it, and runs perfect. Looking for future swap.
What do you think of the reason you haven't seen any issues?
@@BadlandIndustries I use Castrol gold 5 30, and I drive like an old man. I bought as a temporary vehicle. I had no idea Hummer H3's were this good. Amazing sled.
All this is great to know. I’ll be doing something to my 04 Canyon before tong. What I’m really needing to know right now is transmissions. Guy put a 4L80 in mine and didn’t tell me until the 90 day ran out. Now I’m having problems So can we get a transmission video. I’m primarily worried that he rigged it to work.
So you have a non working 4l80? It's been done but it is not something I plan on doing to any of my trucks. However, I will be doing a 6l80 in the badlander.
@@BadlandIndustries it kinda works. The 1st problem I had was it jumping out of overdrive or not going into it. I changed the fluid and began to have problems with it pulling off and shifting into 3rd way too soon. I was told to replace the speed sensor on the transfer case and that solved it for about a day. If I clear the codes, and there are various ones with very little consistency, as soon as it 100% cleared it runs perfect for about 2 minutes Then right back to the problem. Any help would be appreciated. I’ve been watching your videos and you seem the be “The Man” for Canyons and. Colorados. Thank you sir.
@@davidpender60 I'd be curious if the new transmission was tuned or was it simply swapped.
@@BadlandIndustries I’m not sure about any tuning but I can say it operated just fine, for the first few months I had it back. I noticed a whine one night and had to put 2 quarts of fluid in it. I checked it when I first got it back and the level was where it was supposed to be. I haven’t seen any spots on the driveway or anything but it went somewhere. Level seems to be holding for now. I was wondering if it was really necessary to replace all four speed sensors at once.
@@davidpender60 dunno buddy. I'm not very familiar with transmissions.
Thanks!
Sounds awesome
I got an 09 2.9L I need built
How about a ls harness to run cluster and also ac, cruise, and transfer case if equipped? They could send there harnesses . I know others have them but very expensive. Your very reasonable with your rates.
This video was specific to the 4 and 5cyl swaps. I'll have another video talking through the v8 swap options.
@@BadlandIndustries can't wait!!! I'm working on getting 3.5 out now.
Man I got a 2.8 I’m needing to rebuild this spring wish me luck
I'll have a full rebuild video soon.
This video was so cool! Did you ever start the swap service? Would definitely be interested. Coming across this a year after you released it
Yep, rebuilding on currently working on one and I have 2 more in the next month or so.
Oh really! what do you charge for this service?
@@Scars_House pricing starts at $3700
My 06 Colorado 3.5 i5 went out two weeks ago via the timing chain/cam. I don't know crap about engines and am struggling to find parts and replacements.
Are there any other motors that will go into that truck straight up without too many conversions to adapt it? As much as I'd like to get a new truck my finances are pretty limited. I'd drop just about anything in it if it would get me another 2-3+ years for 3-4 grand. Doubt you'll see this comment but I figured I try since you're the first I've found that actually seems to know wtf they are doing with this truck.
You can swap any 04-07 motor and it'll drop in so long as it has the intake cam sensor. Or you if you can find an 08-12 all you need is the exhaust cam reluctor and add a intake cam sensor where it belongs.
Are you aware of anyone ever doing a max N/A type build with these motors? I.E: overbore/high compression pistons, max porting and polishing of the heads, cams, or a combination of or all of the previous? Curious what kind of power can be squeezed out of these without forced induction. I know it wouldn’t be cheap, but I find it way more interesting than just “tHrOw An Ls In ThErE”…
The 5cyl is limited in its ability to maintain oil to all the bearings. That said there is one over bore I know of but I think he still had stock compression. The 4.2 i6 seems to be quite promising.
@@BadlandIndustries Didn’t realize there were any issues with the engine beyond the initial 3.5 engines… have a 3700 with over 200k on it, no issues, although seem to either be burning or losing a bit of oil each oil change. Are there any fixes or mods that can be made to the engine to fix that issue you mention?
@@IvyMike551 check your driver side crankcase vent for being clogged. At 200k it's not surprising. Keep oil in it and it'll take care of you.
@@BadlandIndustries are you aware of any fixes for the issue with it being unable to distribute oil evenly..?
@@IvyMike551 I make a like that helps route more oil to the back of the engine where we see it fail.
Hello, My dad has had his 2006 H3 since 2009 and it needed an engine he went with Jasper and after 3 engines Jasper gave up and sent him a refund. My dad had enough and gave me the H3 as he didn't want to deal with it anymore. Will be dropping it off with the garage I use to find out exactly what the issue is. He doesn't do rebuilds so depending on the issue might need a rebuild or swap and just wondering if you are still building engines for people and how that process works. TIA
We got you covered!
@@BadlandIndustries awesome! Will see what the issue is 4-15 and might be reaching out soon after!
i like your engine swap idea and i could and would use a service like that. Ive a messed up 3.7 2010 Canyon and need to figure out what i wanna do...rebuild, replace(swap)?. i saw your you tube video and gave hope on it.
right now im getting ready break it down to see what the damage is but id rather take it out and swap it for a working unit. what say you?
Most of the time guys don't like the price. It's cheaper than the other rebuilt motor options but more expensive than doing it yourself.
so if i happen to have a 3.5 liter and my 2008 3.7 is blown I could just remove the head from the 3.7 and it should be plug and play.
I haven't seen definitive proof that it's possible. It would be better that you rebuild the 08 with the 05 crank and re-bearing the motor
@@BadlandIndustries thanks i would love that option but my 3.7 has a hole in the side of the block..
Hi...can you suggest a good petrol 2000 cc engine for my Hummer H3
The stock motors were 3.5 or 3.7 liters
Ok here something to about about ...although I do love my lil 3.5l I really am getting tired of all the computer bs ...that's why I'm thinking about going old school. 262ic with a 700r4 will/do you think it'll just drop in or will the motor mounts have to be redone .....what Really would be involved?
The computer actually helps make the newer motors run more efficiently and more powerfully. What issues are you having that are swaying you that way?
How different are the 2.8L engines from the 2.9's? I can see some obvious differences like the valve cover being different... But is there a way to make the 2.8 engine work in the 2.9?
You have a 2.9? For the money I don't think it's worth it
i have my canyon 2011 with a 2.9L and 234 000, i don't know if at some point i'll have to change the engine completely if something happens or i should just try to fix it? i'd like to make some changes to it but i'm not sure what to do exactly
Keep fresh oil in it and it'll take care of you.
@@BadlandIndustries will do and also would you have recommendations of lifting the truck on a budget?
@@tjgamig7487 I've got lifts on the website.
Hello, is the "camshaft phaser in your list the same as the one from the old engine? so i use the exaustcampositionsensor and the cam phaser from the old engine(3500) in the new one (3700)? or is it a totally different one
The head design is different. The 2007 cam reluctor is 5x just like the 04-06 but different for the head design. The 08+ is 4x and also had different reluctor design at the 3.5/3.7 split
I have a 2010 Canyon with a 2.9L i4. Just hit 100k kms on it and I’ve been wanting to put a 5.3L V8 in it, but hell if I can find one with 100k or less kms. Any tips on sourcing?
Dunno if car-part.com has yards in your neck of the woods. Or just know what you're looking for and get lucky at the junk yard. I do have a 5.3 out of a hummer h3 with harness and pcm, 100k miles. I can ship anywhere.
I have a 06 H 3 3.5 I want to either put a 3.7 which I already have a 3.7 head that's rebuilt due to me ordering one and they sent the wrong and wouldn't take it back. Or I want to put a 5.3 in it. Do you have any info on this swap. I know a little, but want more knowledge of this swap. Any info is greatly appreciated.
Thank you
I haven't one a v8 swap just yet. There's alot to know and very specific components to make it all work. The right 3.7 can be dropped in with little more than a tune to make it run 100%.
I have a 2011 Canyon with a 3.7l that I believe jumped the timing chain (no compression) I can't find a reasonably priced replacement here in Canada. Wreckers want over $4000 for motors with 200,000 km. What would I need to do to drop a 2008-2012 3.5 in it. they seem to be more readily available. Would I need to do anything to the computer or control modules?
08-12 all came 3.7l. any of those years will drop in. honestly i would consider rebuilding the motor instead of replacing.
i have a 2007 colorado with a blown 3.7 what other engines will fit with the least modifications and costs
That was the purpose of this video. Your 07 is unique but a 08-12 can be converted rather easily to work.
My 2011 i5 just blew up. Rolled it over to 101k miles and dead. Not sure if I'm gonna rebuild it or swap it.
Where are you located? I can rebuild it
I’m very interested in your engine swap service I have an 04 with a 3.5 that is running horrible my father gave me it w 120k it had the trans rebuilt about 2k ago. I also have an 07 3.7 with the trans transfer case and front diff missing the intake/exhaust manifold I need to decide what to do and proceed asap this truck would be handy as a spare vehicle.
Install the 07. It'll drop in and run. Just get it tuned. Make sure it has both cam sensors.
I have a 2006 canyon fin 75% sure the timing chain is stretched so I’m going to wait till in fails the swap in a a 5, or 6 cylinder I like it to be as direct and plug and play as possible and recommendations or tips ?
Cheaper right now to pull the motor and install new bearings and timing kit.
I have '06 canyon 3.5 l5 2wd off-road edition transmission finally died. Ive had 3.7 l5 motor with 4wd trans and all front end parts not sure year. Question 1. How to determine year? 2. Steps, advice, and parts list to convert motor and 4wd? Any help would be greatly appreciated.
Quick inspection would be aluminum valve cover and whether or not you have an intake cam sensor. If you have both it'll drop in place of your 3.5l. If you don't see the intake cam sensor you will have to add it along with the exhaust gear from an 07. Also be mindful of the oil pan shape. The 2wd and 4x4 were different.
@@BadlandIndustries is it possible to convert 2wd to 4wd? My 2006 has keys and I have the entire front 4wd powertrain around 3.7 out to hubs. I just got bad lands lift 3" f 3" r kit.
My auto transmission was having issues shifting into 2nd until warmed up, then jumped in and no gear would pull and doesn't make any sounds shifting through all gears P R D 2 1? Trying to get through this cheap as possible
@@dustinwatwood6101 sounds like typical 4l60 things. Good luck buddy
@@BadlandIndustries well I got a 2009 canyon 3.7 4wd automatic transmission 134k miles I'd trade for a 2006 canyon 3.5 2wd automatic transmission. If you know anyone.
Have a question I have 08 hummer H3 engine that I’m trying to put in my 06 hummer H3 it’s the 3.5 do I have to change the inside harness and steering column?
No but you need the 07 cam reluctor and add the hole for the intake cam sensor
355 swap sage, if I have a 07 3.7 swapped into an 08 ECU and harness- do I need to replace the 07 exhaust sprocket with the 08? Or can I just swap my exhaust sensors ?
You need the amount of pulses ans sensors your pcm expects. You'll need the 4x exhaust sprocket from 08-12.
I have an 04 3.5L rwd with 197k. I bought it new. I started getting a low oil pressure light when I come to a stop with 6qt of mobile 1 5w-30 after warmed up. I have changed the sensor with no effect. I now run 3qt of 30wt and 3 qt of 40wt to not get the warning. Is there anything else i can check?
Your balance shaft bearings are worn out. You are likely on borrowed time with that motor.
@@BadlandIndustries ok. Thanks. It started doing this 20k miles ago after I tried the shell truck oil with the higher moly. I think it started a new break in cycle. Will an oil test pick up the wear material? I guess I better fix the 91 trooper head gasket so, I can have a backup vehicle. What are your 3.5L rebuilds running?
@scox7760 at 200k you should consider rebuilding the motor. If you rebearing the motor and put a new timing kit it'll run great for a while still.
Could this be related to a resonance frequency vibration I get every time I reach 1550 rpm while driving? It sounds like a loose heat shield or something on my exhaust system. It won't do it while parked.
@scox7760 usually that's the head shield on the collector. The tack welds cracked. You can pry it away so it doesn't rattle
Can't find a cam phazer for the 07 3.7, do you have a line on one?
Just Google the Delphi part number. They're still around.
nobody has one.
nobody has any
Yep. All out of stock. Is it safe to use the old one from my 07 motor.
I have a question. The transmission went out on my 07 with the 3.7 and I have found a low miles transmission from a 04 with the 3.5. Are they the same? I’m having trouble finding any info on it. They are 4wd trucks if it makes any difference.
If the plug is the same color and the bellhousing is the same you should be good.
so what if im trying to put a 2004 3.7L into my 2008 3.7L truck??
2004 was a 3.5l and never came with a 4x exhaust reluctor so it wouldn't work.
We put a 2007 Colorado 3.7L in 2008 Colorado. Now it sounds like timing chain is slapping valve pan when idling. Any idea why 🙏
For starters did you change the exhaust timing gear?
Thank you so much for your reply. I will check in the morning.
Hello, I have an 07 Colorado with 180k miles on it, inline 4 2.9, do you think it would be possible to swap a inline 6 4.2 from 04-07 into it? will there be enough space?
Only a couple have done it. But it is a tight fit.
Mine is a factory v8 5.3 don’t give any problems
You did it right. Still keep up on the oil changes. I've seen a few fail over the years.
Where you located?
Nevada
I have a 2009 colorado with the 3.7 L in it. I had the engine rebuilt once before and the crankshaft is what broke. The mechanic had it welded back together because he could not find a new crank to replace it with well about a year and a half ago it broke at the weld and has been sitting in the mechanics shop because he was not able to find a replacement crank. My question is since the 3.7 L engine is no longer an engine that is being supported for replacement parts. Can I swap my engine with the larger V8 engine that was offered in this vehicle from the factory without having alot of computer and wiring changes. I guess what I am asking is it a huge headache to change my engine out for a V8 or would it be easier to buy a used engine off Ebay that is a 3.7 with 80K miles on it.
I have extra cranks here I could sell. Honestly a v8 swap is a daunting task if you're gonna do it yourself
@@BadlandIndustries can you send me a price for a crank if you are will to sell one and it isn’t broken or welded back together
@@DylanArthur-q7q email me and I'll reply.
@BadlandIndustries. it's not that bad if you have mechanical knowledge.. transmission input shaft needs changed different torque converter or couple places sell install kits now .. 2005 3.5 to 6.0. 2008 3.7 to 6.2
I have a 2011 3.7 with a bad engine. I purchased a parts truck that’s a 2007 with a 3.7. Is the exhaust came reluctor the only modification needed to put the 07 motor in my 11?
Pretty much. Youll leave the intake cam sensor in the head but it wont connect to anything. You could install your 11 head into your 07 block but that'd a bunch of work.
I appreciate the response. Do you think using the reluctor off my 3.7 is okay or do I need to purchase new?
@@RaySpeaksTruth they're getting hard to find. But make sure it works before swapping.
Would I be able to swap 08 canyon trans into a 05 Colorado both 2wd
It is my understanding only 4l60 trans are compatible if the connector is the same color. That said, the valvebody could be different.
any ls swap or sbc swaps that will still pas emisions.
Quite a few but that will depend on your local emissions requirements.
What do you sell your short blocks for 3.7 2010 I have no core
Complete drop in motors start at $3700
I have a 3.7 out of an 08 that needs rebuilt
Send us an email.
@@BadlandIndustries ... I'd do that, but I'm not seeing your email address anywhere... ps, I might be tech-slow...
@@jakeingram6980 I prob don't have it here on TH-cam but it's all over the website. sales@badlandindustries.com
I have a 2012 with a bad block I can get 2006 so basically I would put the 2012 head on the 2006 engine. Would that work?
The head gaskets are different, so I'd be hesitant to recommend that. you can swap in any 08-12 motor, and it'll drop in
I found a salvage yard that says they have a 2007 Colorado and 2007 Isuzu i290 both say they have the 2.9L is that correct and will it be a direct swap?
@@dougmoore3084 yes but the head will have the intake cam sensor hole and 5x reluctor. So you'll still have some work to do on your end.
@@BadlandIndustries
Ok thank you man
Are the blocks the same?
@@dougmoore3084 yes
Wouldn't it be simpler to swap the matching pcm ?
If you motor swap within the guidelines I outlined in this video you won't need to tune. If you swap pcm's you will absolutely need a tune so the body computer will have ptoper communication.
Has anyone tried putting the 4.3 v6 s-10 motor in a h3
Not that I'm aware of. It would likely be underpowered still.
How reliable are these engines I have 2k on my 2004 3.5 Chevy Colorado
Keep oil in it. We have several known over a half million miles
Well hell I'm creeping up on 400k. My grandpa owned it before me, I might have some time still
Do an LS swap
There's several options. Event the inline 6 4.2l is becoming possible.
I got a 2008 Canyon in a trade deal for my old Jeep. The previous owner swapped in a 3.5 from a 3.7 that blew up on him. How does this swap work! It’s been crazy trying to find any info on how this is done. Anyone want to trade a 3.5 for a 3.7? Lol
Are you sure its a 3.5? Plastic valve cover and teardrop shap coils? There was no 4x reluctor in the 04-06 motors.
Where are you located lol
Nevada
Hell yes ..!!!!!!
Just go straight for a 6.0 LS and make some power
Most sell their truck cause they can't afford to swap a motor. Nevermind the cost associated with ls swapping. I fully agree with you tho.
What's an LS cost? I think between my shop and the one next door I can handle the labor. I got an 05 i5 with high milage. I've replaced my carrier bearing twice and my trans mount but I still get a clunk with quick acceleration. Will that whole ass end need to be upgraded to compensate for an LS?
Also very interested in the engine swap as an alternative
Has anyone swapped a VW TDI into a Colorado? If not, they should.
I'm in the group on fb. But elected to ls swap. I think there's a few talking about it. More than a few lbz and bt4 swaps tho
@@BadlandIndustries I can see why the LS swap is more appealing. You’re getting way more power for less money, but having a TDi with a mild tune getting 30+ mpg while having enough torque to plow and tow is tempting.
There’s gotta be a manual transmission out there that will bolt up to the VW and allow you to keep 4wd.
I think a GM 2.8DuraMAx would be the ultimate! These motors are used overseas in the Colorado badged as an Isuzu and common in Thailand, Malasia, Austraila
@@ejgrant5191 The 4jj1 came stock in the Holden and isuzu variants in Australia and elsewhere.
How do we contact you?
Do u have an email?
Phone and email is on the website
If you got jasper motors going bad that fast you’re probably doing something wrong, as of right now there’s no better motor than a jasper
Had a buddy that went through 7 jasper motors and several died before the first oil change.
i need this done 🥲
You know how to get ahold of me.
Sounds a like a good idea on the engine swap service.
i have a 2010 with a 4cyl can i put a5cyl from an 04 in it?
I wouldn't.
@@BadlandIndustries so is it not worth it
Your 2.9 is about your same power as that 3.5l and without the added cost of conversion
@@BadlandIndustries my 2.9 has a rod hanging out of it 😅
Ooooffff better to find another 2.9
Good morning, I just stumbled across your videos. I have just encountered the spun rod bearing failure, except mine is on #4 rod. I would be intersted to learn more about your engine rebuild services and or engine swap program. So far I am enjoying your vidoes and have subscribed to the channel. Thank you for taking the time to teach all something new about our beloved colorado's.
Man that's terrible. Email us and we can start the conversation about building you a motor
@@BadlandIndustrieswhat's the email
I know this is an old clip.. but i have a 06 3.5 H3 adventure that burned a valve then started knocking!! I am wanting to put a 3.7 in it!! I watched your video.. and had to rewatch a few times lol.
So sounds like I need an 07 3.7??
100% an 07 will drop in and run. You'll benefit from a tune as well
my i5 has low compression. I'm very likely trading in for a newer vehicle but am wondering what it would take to swap with a more powerful V6.
More time than it's worth to research. Ls swap, done.
Hello, I have an 07 Colorado that runs good but I would like to have it rebuilt. Do you provide this service? where are you located and how much would it cost? I believe mine is leaking a little oil that is why I would like to have it rebuilt.
We are in Reno, Nevada. I can ship a rebuilt motor to you anywhere in the country.
That motor swap deal would be something. Would you be using r&r kits or piecing the parts together.
DNJ and enginetech still offer pretty much everything. Obviously the crank would need to be sent out. For the most part we can still get rebuild parts
What are you looking at for rebuild? 3.5 L inline 5 on a 2005 Colorado...Money wise??
Pricing starts at $3700
Hi. What need to be changed to use 07 3.7 in 08 truck with 3.7?
That's what this whole video was about. The 07 and newer have the same head design. However the 07 had an intake cam sensor and 5x reluctor. 08-12 had 4x and no intake cam sensor.
so if i get a 2004 3.5 engine i can used mi 2012 heads?
I would expect so since the bore would be the only difference. You could have the block bored out to 3.7l and install new pistons and run it.
@@BadlandIndustries so if i want to used the whole engine out 2004 won`t work on mi 2012 ?
@@cristianbustos4918 the amount of work you're suggesting iss far greater than rebuilding the motor you have.
Swap service!!! I need help!! Would like to go 6 cyl in my 05' Canyon (currently has 3.5 I5), but wouldn't mind having the best version of the 3.7 I5
We are still working out the kinks of putting a six cylinder 4.2 in the colorado's
I have an 06 canyon, blew motor up, took motor out of an 08, but having issues.
took computer off an 07 but still didn't run right.
what do I need to do?
Watch the video again. It's actually really simple. You need the exhaust cam sprocket and the intake cam sensor. You don't need the computer, harness or anything else.
So say i have an envoy 02 and a canyon 03. Envoy has 4.2 i6 canyon has 2.9 i4. Can i take the i4 and put it in the envoy? The 4.2 had main bearings go out and the 2.9 was wrecked.
I mean anything is possible but just go pull another 4.2 from the junk yard. They're only a couple hundred bucks.
A question I’ve had is is it possible to to a bolt on 4wd conversion on an 08 Colorado with a 2wd non torsion bar suspension. I can source all the parts from junkyards but didn’t know if it was possible. Also it’s a 2.9L with the 4L60E so I can trim down the output shaft to fit the transfer case and I have the frame and oil pan clearance too. Also can you even fit a torsion bar setup in place of the old transmission cross member?
depends how proficient you are with a grinder and a welder. certainly faster and easier to go buy a 4x4 and sell the truck you have. might even get a 5cyl in the swap
Interested in your rebuilding services. We’re you located do you do work for California.
Just over the hill in nevada
Is the engine cradle wider to accomidate the v-8 engines offered in 2009-2012 models ?
The frame didn't change. The motor mounts did however. These simply adapt the stock i4 or i5 towers to the v8.
What would it take to swap in a newer engine 2.5l inline 4cyl from a 2017 into an 08 Chevy Colorado?
More than I'm prepared to find out. Just ls swap.
does the pcm interrogate the cam censors one at a time, is so can you wire both cam sensor wire to one cam cosset and satisfy the pcm?
No, they have different pulse counts. If you computer expects 2 cam sensors you can't have only one present.
Any idea about the 4cyl compatibility?
2.8 is junk in my 06 Canyon. I’ve found two used 2007 2.9s used.
Can’t find much online if the 2.9 is a direct swap or if I need the pcm.
All the i4 were 4x so it's likely they will all swap
@@BadlandIndustries Appreciate it!
Interested in your swapping out I can bring my truck to you
How far from reno are you?
Hello, I recently purchased a 2007 hummer. Problem I have it only starts on the second crank. So I crank it turn off ignition and starts the second time every time.
Come to find out it does have a newer Colorado 3.7. I look at the cam positioning sensor port and I can tell it’s been drilled in. I have seen in other video if that hole has not been drilled in the correct spot it could cause this problem. Any ideas? Not sure if the sprocket has been changed out.
Your 07 is likely the late half year. Do you have 2 computers near the coolant bottles on the firewall?
Sent some pics on your Facebook page messenger
go for it
I have a 08 2.9 4 cyclender and i want a 6 or 8 cyclender but i dont know if there's any compatable or if frame can handle a 8 i want more power in the truck and to lower it and convert the drums to disch and try to change the leaf springs to shocks or something btw its a crew cab i want to make it a nice truck but right now its a project truck that struggles to pull its own weight
Clearly define what you want to do with the truck and do it once. The frames will be able to handle the hp of a v8. Several rear disc options. Sounds like you have quite the project on your hands.
@@BadlandIndustries I just want a good everyday driver V8 truck that can actually go up hills easy and can fit, and that can also tow. What engines can fit this comfortably ?
@@caymanwinebarger3758 definitely consider the gen 4 ls variant v8s.