Спасибо Вам Зафер за наглядный урок! Приятно смотреть ваши ролики. Ещё всегда любуюсь как вы паяете. У вас мгновенно получается отличная спайка проводов. Наверное используете флюс - гель?
@@ZAFERYILDIZ52 finally, a video without music. music in videos is often boring and not enjoyable, as they are often too loud. but nice video without music.
Yes, this is Mr. Yildiz's educational project. The Hall microsensor finally redirects the load current in the coils after it has passed through the N or S magnetic field. Therefore, it is a kind of synchronous rotor position supervision system. The minimotor will also function when powered by a single-phase frequency converter. Then the voltage should first be directed to the mains transformer, e.g. 230/24 VAC, and the base codes should be set appropriately. In the case described in this way, the position of the rotor is not controlled. Of course, any micromotor without an armature is at risk of falling out of synchronism. Mr. Zafer optionally simplified his school model and let's be grateful to him for that! Best regards to the Speaker and the Channel Fans 💖👋😀.
To understand the working principle, it is enough that the rotor has 2 poles. By increasing the number of poles, the gaps in between can be filled to ensure operation without cranking from the shaft. Good job. Thanks for sharing 👏
Four magnets is definitely better as the hall sensor can be placed on the top or bottom. Plus it makes the motor stronger. Also bearings would make the motor spin faster.
Хороший видос без назойливой попсы, такой же принцип работы электродвигателей применяется в компьютерных вентиляторах. Успехов в дальнейших экспериментах.
@@ZAFERYILDIZ52 you've just made the same translators mistake, as Madonna had made on her concert in Moscow: change "фанаты" into "вентиляторы" and the russian phrase you wrote will be a brilliant 😉 (Currently you've got "...many admirers use the system...")
Greetings. I think it is better to make a self-starting brushless motor using Hall sensor for training. I didn't see a good example on TH-cam. By the way, I have used many of the circuits you taught. Thank you zafer.👍
I got to the moment shown in the video from 3:31 to 3:39 and my rotor is turning with difficulty because it is attracted to the pad of one of the supports. Where is the error, or in other words: what are the dimensions of the magnets and what type are they (among N27 - N52)
good motor. next version make it with 4 coils and some little pcb board for motor control :) will be more efficient and stable. also need better mechanics construction like ball bearings and outside box like a real powerful motor for home / DYI test and applications. good work
Eline sağlık cok güzel muhteşem buroje olmuş. Mini 12 voltluk panel bunu calıştırırmı Allah sana uzun ömürler versin. Sen bizim için cok deyerlisin senin içatların cok yararlı ve faydalı oluyorsun başarılarının devamını bekliyorum başarılar dilerim
Can you please explain why we use a tweezers to mount the washers? I find the anomaly of doing it that way to be somewhat fascinating and to a great extent hilariously amusing. You have me completely dumbfounded by this ingenious application of a tweezer to enable the complicated mind blowing task of mounting a washer. Lol
I remember that 50 years ago, I used to play with very small toys cars, electrically moved by brushless rotors, and small battery like a pill, thus with only direct current. They hadden't any electronics' ...
This type of motor requires very high precision, you need low friction bearings, you need a lathe to make the precise steel section, and you need a 3D printer to make the plastic part and the casing precisely to get a highly efficient motor.
@@geooogle its cyanoacrylate, or more commonly known as super glue, crazy glue, etc the spray accelerates curing time but is not necessary. you could use just plain water in a spritzer.
Спасибо ! Очень просто и понятно 👍 🤗😄💡
soet en nateg,to sem kupil 3 komade pred leti in ni nič iz tega.Pobiranje denarja
Спасибо большое вам. Теперь больше видео про больших генераторов ❤
Merci c'est vraiment ingénieux ce truc bon travail
espero ver este motor en una maquina voladora algun dia
Спасибо Вам Зафер за наглядный урок! Приятно смотреть ваши ролики. Ещё всегда любуюсь как вы паяете. У вас мгновенно получается отличная спайка проводов. Наверное используете флюс - гель?
Love it...
very good for not other free energy video.! thanks😊
Thank you very much for your nice comment and support.
Nice. Honest. Actually working and not one of the thousends of post that are misleading fakes. Thanks!
Thank you very much, you are really great👍🌹
good
Thank you for your nice support and comments.
как макет рабочий для школы - весьма полезен , лайк !
That Good video clip and Number one for you. Have a good nice day ❤❤❤❤
Thank you for your nice support and comments.
Развивайтесь
@@ZAFERYILDIZ52 finally, a video without music. music in videos is often boring and not enjoyable, as they are often too loud. but nice video without music.
Yes, this is Mr. Yildiz's educational project. The Hall microsensor finally redirects the load current in the coils after it has passed through the N or S magnetic field. Therefore, it is a kind of synchronous rotor position supervision system. The minimotor will also function when powered by a single-phase frequency converter. Then the voltage should first be directed to the mains transformer, e.g. 230/24 VAC, and the base codes should be set appropriately. In the case described in this way, the position of the rotor is not controlled.
Of course, any micromotor without an armature is at risk of falling out of synchronism.
Mr. Zafer optionally simplified his school model and let's be grateful to him for that!
Best regards to the Speaker and the Channel Fans 💖👋😀.
Reee
WWE rt
Thank you for the likes 😀.
AS an expert on Brushless motors I would class that explanation as the biggest lot of B***S**t I have ever heard and I have heard plenty on you tube.
How does this work with the magnets being north and south?
Very nice video brother ❤❤❤
Nice build bro👍
Thank you for your nice support and comments.
Sargının birini kullanıyorsun . Devreni her iki sargıyı da kullanacak şekilde tasarla😊
Bi kerede eleştirmeyin yaw
To understand the working principle, it is enough that the rotor has 2 poles. By increasing the number of poles, the gaps in between can be filled to ensure operation without cranking from the shaft. Good job. Thanks for sharing 👏
Sure, but increasing the number of poles you are killing that amazing sound of the working gasoline motor 😊
@@MasterGallery😊
Thank you for your comment and support, and your observations are absolutely correct.
Four magnets is definitely better as the hall sensor can be placed on the top or bottom. Plus it makes the motor stronger.
Also bearings would make the motor spin faster.
That's cool how the hall sensor senses the magnetic field and the circuit switches polarity of the electro magnets in time
Aslamoalaikum,
Congratulations 🎉 for 1M.
Thank you for your nice support and comments.
السلام عليكم الله يعطيك العافية
Ellerine emeklerine sağlık ustam selametle ❤👍
çok teşekkür ederim sinan bey
@@ZAFERYILDIZ52 🤲❤🇹🇷❤👍
Super, ich habe auch schon überlegt einen Motor zusammenzubauen; wußte aber nicht wie; toll auch dass Du zeigst dass es nicht so einfach ist.
Ich denke, es ist nicht schwierig, es ist möglich, es einfacher zu machen.
السلام عليكـم و رحمــة الله و بركاتــــه ...
th-cam.com/video/81uGjQ6oNW8/w-d-xo.htmlsi=9CCKmVMSJgOeYsDj
Excellent!! And Thank You for NO music! 😍👍
😁💕
Хороший видос без назойливой попсы, такой же принцип работы электродвигателей применяется в компьютерных вентиляторах. Успехов в дальнейших экспериментах.
большое спасибо, да, многие фанаты используют эту систему, но там больше катушек и магнитов
@@ZAFERYILDIZ52 you've just made the same translators mistake, as Madonna had made on her concert in Moscow: change "фанаты" into "вентиляторы" and the russian phrase you wrote will be a brilliant 😉
(Currently you've got "...many admirers use the system...")
@@ZAFERYILDIZ52 а в помпах стиральных и посудомоечных машин - ...
и я тоже согласно этому принципу - компьютерные вентиляторы запускаю "с толкача", а когда не жарко - не запускаю.
Great work sir 🎉🎉next time add 30 to 60v super capacitor for very high speed ❤
Bom dia meu camarada. fantastico sua experiencia, parabens. Valeu!!!!!!
Bonne idée pour les moteurs a immersion 👍
ขอบคุณมากครับติดตามและรับชมครับ
Harika fikir. Karbon yok, pabuç yok.
Original shom bom amigo👏👏👏👏👍
güzel yorum ve destek için teşekkür ederim
Bonsoir comment vous allez @@rildosouza7223
Very good!
Merci beaucoup.
Very nice idea 💡 brother
Excellent buuld ☆☆☆☆☆
very good 👍
Wow just wow
👌
Nice❤
CONGRATULATIONS ❤
Very Interesting Project New Generation Children s very useful video THANKS ❤❤❤
Thank you very much for your comment and support.
Very nice
Nice 🙂
жопу собі , тим вазеліном намасти - бестолоч .
Gracias por todos esos buenas e ingeniosas ideas que compares con nosotros.
Caluroso saludo desde Colombia
Super
Greetings. I think it is better to make a self-starting brushless motor using Hall sensor for training. I didn't see a good example on TH-cam.
By the way, I have used many of the circuits you taught. Thank you zafer.👍
This motor is the best and very strong
Prima di tutto iniziare mangiando dei ghiaccioli per ottenere alla fine i bastoncini di legno.😀😀
Hi there. What is the adhesive system you are using with the aerosol and the black hot melt glue? Cheers !
It look like so capacitors in use can be good in this case
Best thing which i like they have not used any type of music ❤
Harikasın üstad...Çok faydalandım. Eline, Emeğinize sağlık. Çok teşekkür ederim.
Is it possible to make BLDC table fan using this with in 20 w power consumption?
Good idea
thx my friend
Nice for demo and learning purposes.
Absolutely and thank you for your support.
Nice work, Zafer. Thanks
Motor sem escova muito bom 👍
Cómo siempre maestro muy inspirador gracias 🤗
Muchas gracias por tu lindo comentario y apoyo.
Sooo wonderful...great job❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤new conecting frm India😮🎉
Super robota. Pozdrawiam świąteczne.
excelente trabajo
Minuto 13:26 , el sonido parece camion con motor diesel .👍👍👍👍
Bạn chế tạo động cơ không chổi than thật rất tuyệt vời
Muito muito bom ❤
Mantap nih br inofasi bro
Sería interesante verlo funcionar con 2 rodamientos 608-5 en el eje. Útil como para hacer una pequeña esmeríl a 12V.
10 sur 10
Oh! Congrats on the 1 Million Subs!! 🙏❤🌞🌈🎆🎉🎊😃
thx my friend
Sangat bermanfaat ilmunya trimakasih
terima kasih atas dukungan dan komentar yang bagus
Bu mantığı anlamak açısında güzel
Ama daha önce yaptığınız daha iyi
Elinize sağlık
Volan koymamak icin rotor kutlesiniz attırdım farkı bu
@@ZAFERYILDIZ52 volan nedir açıklayanilirmisin ?
Açıklayabilir Misiniz ?
I got to the moment shown in the video from 3:31 to 3:39
and my rotor is turning with difficulty because it is attracted to the pad of one of the supports. Where is the error, or in other words: what are the dimensions of the magnets and what type are they (among N27 - N52)
Eline saglik ustam iyi fikir
ben teşekkür ederim kardeşim eksik olma
Well done yaar
Funcionaria como gerador? Poderia aproveitar a ideia.
Obrigado
Brawo, czysta magia😃👍
good motor. next version make it with 4 coils and some little pcb board for motor control :) will be more efficient and stable. also need better mechanics construction like ball bearings and outside box like a real powerful motor for home / DYI test and applications. good work
the next one will be more advanced
Zafir preciso de um projeto de ventilador de alto giro e super economico para painel solar 1200 rpm e baixo consumo
احسنت هذا راع 🎉
excelente excelente
Thank you very much for your comment and support.
Eline sağlık cok güzel muhteşem buroje olmuş. Mini 12 voltluk panel bunu calıştırırmı Allah sana uzun ömürler versin. Sen bizim için cok deyerlisin senin içatların cok yararlı ve faydalı oluyorsun başarılarının devamını bekliyorum başarılar dilerim
夏休みの自由研究みたいですね、実験物は大好きです。
素敵なコメントとサポートをありがとうございました。
Can you please explain why we use a tweezers to mount the washers?
I find the anomaly of doing it that way to be somewhat fascinating and to a great extent hilariously amusing.
You have me completely dumbfounded by this ingenious application of a tweezer to enable the complicated mind blowing task of mounting a washer.
Lol
А Вам неодімовий магніт на руках ніколи нічого не прищеплював - не затискав? ;)
بسیار عالی 🎉🎉🎉🎉🎉
Excelente
Hi, i wonder how did you make the coil molds or if you buy them?
I actually printed it on a 3D printer, but you can use this type of material.
@@ZAFERYILDIZ52 🥹 I got no 3d printer I'd love to have some kind of mold for my coils for easy assembly
interesting
Abi Dyson gibi büyük markalarda aynı şekilde motor yapıyorlar ve motorları çok güçlü ve sağlam oluyor
Thank you too much
Çok güzel video hocam
Teşekkürler kardeşim
130 subscriber complited thanks for watching
rất hay
А какая мощность? На палочках от мороженого мощный двигатель на сделаешь! Но идея в целом интересная.
I remember that 50 years ago, I used to play with very small toys cars, electrically moved by brushless rotors, and small battery like a pill, thus with only direct current. They hadden't any electronics' ...
cAN WE USE ALUMINIum wire? solder wire? what difeerence it makes?
Мощь слишком избыточна 😅
This type of motor requires very high precision, you need low friction bearings, you need a lathe to make the precise steel section, and you need a 3D printer to make the plastic part and the casing precisely to get a highly efficient motor.
If the motor is made smaller it would be perfect to power an old biplane model aircraft. One.would even have to spin the propellor to start it up.
Great idea how to make a brushless motor at home thanks for sharing
Wow
Que es ese aerosol que le pones?
ممنون ❤❤❤❤میشه نقشه روبذارید❤❤
Elinize sağlık.4 bobinliyide bekleriz.
gelcekte neden olmasın
Phải Khởi động bằng tay 😅
👌
untuk menggerakan genereator, jadi free energy
What type of glue are you using?
I'd love to know as well. and why...
@@geooogle its cyanoacrylate, or more commonly known as super glue, crazy glue, etc
the spray accelerates curing time but is not necessary. you could use just plain water in a spritzer.
@@jacklarson6281and what might the black glue on the glue gun be, or is it same silicon glue just in black?
@@jalildragneel2674 I'm pretty sure that is just standard hot-glue that is a different color than usual.
shock japanese adhesive