Good model, if u keep it inside a shed or garage it will tend to not build rusty growth where u can't see it! Inside the cable assembly cover, hence, not the steel cable itself! Inside is where u can't see until it breaks.
@@PNWSmallEngineandLawn it came in today and seems to be longer than it should be. even with the nut adjusted all the way up on the bracket. the wire has alot of slop.
Hey this is a good one Mike. I worked on this exact model mower over the winter for a guy at my job. His needed a new carb. No matter what I tried with his original carb it just would not run consistently. Once I put a new one on and adjusted the cables just a little bit she ran like new. A bit of an over complicated machine but hey it's a Honda😄
@@albertjordan2244 I don't, sorry. Though I just replaced mine yesterday. Once I figured out how it connected, I was able to do it but it's a very tight space and I don't think the camera could get in there. I'll try to take a video explaining what I did for you.
![🎤 จับฉลากร้องเพลง x P’ #XXSIVK [EP.1] (2/2) เพื่อนจับได้คำไหน..ต้องร้องคำนั้น เริ่ม! 💓🎶 #MXFRUIT](http://i.ytimg.com/vi/1bJvMJXmeS4/mqdefault.jpg)
Good model, if u keep it inside a shed or garage it will tend to not build rusty growth where u can't see it! Inside the cable assembly cover, hence, not the steel cable itself! Inside is where u can't see until it breaks.
this just happened with mine. Thank you
Glad it helped
@@PNWSmallEngineandLawn it came in today and seems to be longer than it should be. even with the nut adjusted all the way up on the bracket. the wire has alot of slop.
Hey this is a good one Mike. I worked on this exact model mower over the winter for a guy at my job. His needed a new carb. No matter what I tried with his original carb it just would not run consistently. Once I put a new one on and adjusted the cables just a little bit she ran like new. A bit of an over complicated machine but hey it's a Honda😄
Ya honda likes to add some extra complexity. Probably to justify the cost lol
Resting position is equal to a non-engaged non-tension on the pin, correct!
I can push my yellow roto stop button and it engages up until about 1/2 way releasing handle.I just changed the cable
Could be the handle mechanism itself or the clutch is getting worn out
Great information 👍
There are two pins that get removed when you take out the cable. Can you show a better view of the cable as it attaches to the lever end of the mower?
I can. I have another one that needs some work so I will be removing the clutch. I will get in closer
Is this the clutch or rotary cable? On mine, this looks like the rotary cable
Technically it is a rotary cable
@@PNWSmallEngineandLawn Ah okay, yeah. The title was a little misleading, still good information though! Thank you!
@@woodchippin do u have a video for the clutch vable
@@albertjordan2244 I don't, sorry. Though I just replaced mine yesterday. Once I figured out how it connected, I was able to do it but it's a very tight space and I don't think the camera could get in there. I'll try to take a video explaining what I did for you.
It sounds like the thermowax needs to be replaced since it's surging when it's warm.
Could. That machine if I remember needed some serious work