Nikon F3 : Finder cleaning
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Hello friends,
Today I show you how to clean the finder of a Nikon F3 camera. This part, due to its construction, has a tendency to collect lots of dust in time.
keywords: f3, F3, nikon f3 disassembly, lens repair, nikon F3, finder repair, dirty finder cleaning, nikon F3, finder cleaning, camera finder cleaning, how to clean camera finder, F3 finder, Nikon F3 finder, clean nikon F3, clean nikon finder.
Some useful stuff (I’ll get a small commission if you order thru any of the links):
Optical cleaning paper: amzn.to/2HXBgYI
Optical cleaning fluid: amzn.to/323HFci
Rubber tools: amzn.to/3mEcdco
Lens spanner: amzn.to/35VCYSL
JIS screwdrivers: amzn.to/3mC06MQ
(This set has J000, J00, J0, J1)
DONATION: paypal.me/DiyE... If you find this video useful, informative and adds value to you (and possibly saved, or made some money by repairing the camera or lens), then consider donating to the channel
very useful information on F3!!~ hope to see more Nikon F3 repair video !!~
If I have to work again on a F3, certainly. 😊
Thank you very useful
Hi, you're welcome. Don't forget to like, subscribe and tell all your friends about the Channel.
Thanks for another clear and straight forward video. Do you know if the F4 finder is very different to the F3? My F4 is a little dusty.
I need to take a look at a F4 finder before telling you for sure. Cheers.
So helpful!
You're welcome 🤗
Thank you, very helpful.
Can you make a video for cleaning Nikon F4 viewfinder please.
Hi, I'll try to make one whenever I have an F4 finder available. Cheers.
@@diyextravaganza Thank you 🙏🏼
@@diyextravaganzaHello again, what about if I send you my F4 viewfinder so you can make a video and clean the lens which has a spot from the interior face, where do you live?
I have saved this in case I will need it. have one issue with my 3: When I open the door to the film department, a little pin should pop out in the upper left corner - then when you close the door it resets the frame counter.
Mine doesn't come out so it doesn't reset. I have to remember how many shots I have taken.
Do you know about this problem?
Hello, honestly I don't. You should ask in the learn camera repair group on Facebook. Someone will know for sure there. Cheers.
03:25 Eyepiece Shutter.
Thanks!
Hello, does anybody know the size of the 4 small screws that secure the top plate to the unit?
I don't have a finder around so cannot measure, but my bet is either M1.6 or M2. Cheers.
How would you take out the bumps on the top cover?
I'll take a small piece of hard wood (like a stick) and a small hammer and I'll start hitting from behind. Cheers
@@diyextravaganza does it need to be heated or anything ?
I don't think so, just be patient and go progressively. Cheers.
What if the mirror is dusty? Im scared to touch mine :(
mirrors are tricky because very delicate. Try blowing, or a very soft microfiber cloth. cheers.
@@diyextravaganza thanks for the reply. I read somewhere there could be some kind of surface coating applied, I was unsure of ruining it. The layer of grime on it though is making the image in the viewfinder very dull. Even less so than my FM2, which is a much smaller magnification with less light coming through. My F3 is mint condition otherwise, so I'll play it safe and just keep it as is. lol They don't make em like they used to.
@@reddevil211287 yeah, the silver or aluminum coatings in mirrors is very delicate. One approach is to wash it with a mix of distillated water and isopropyl alcohol and remove the grit gently with your fingers. Then rince with distillated water. Distillated water is essential so not to leave traces on the surface once it dries. Cheers.
@@diyextravaganza Great suggestions, I think others will benefit from this chat too. :)
@@reddevil211287 I certainly hope so.
You should have gone all the way and pulled the prism.
Did not think about it. Cheers.