How to Separate the Turn and Brake signals

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2024
  • somehow TikTok helped me figure out how to separate the brake and turn signals out so that we can wire them up to a show mode module without issue!
    2 to 3 wire converter: amzn.to/4d5P8uj
    Ultrasonic cutter - amzn.to/46wgTZv
    Dremel - amzn.to/2uDjjbO
    Dremel Flex Tool - amzn.to/38mRpPV
    Dremel Quick Release - amzn.to/2tUUcB2
    Dremel Diamond Bit - amzn.to/2uFPmaZ
    Plastic & metal adhiesive - amzn.to/37cIwXS
    Wire Strippers - amzn.to/39thgWI
    Soldering Iron - amzn.to/2SFCw4q
    Solder - amzn.to/2HgX7qA
    Heat Shrink - amzn.to/38qFyAA
    Heat Gun - amzn.to/2UJjwVx
    Zep - amzn.to/39pqTpd
    RetroRubber - amzn.to/38fmsNz
    Impact drill - amzn.to/3bASPbN
    Goop adhesive - amzn.to/46kgXuf
    Black silicone - amzn.to/3G1uvAd
    Buy me a coffee -
    www.buymeacoff...
    Videos Shot on:
    Canon Rebel T6 - amzn.to/2SGrCf7
    Phone Tri-pod - amzn.to/2HceVTX
    Amazon prime 30-day free trial link:
    amzn.to/3bsdM8t
    *These are all affiliate link, I do get a commission from each purchase made from the links*
    #ntxglow

ความคิดเห็น • 13

  • @nascardrawings7700
    @nascardrawings7700 4 หลายเดือนก่อน +2

    A lot of people will see this that just want amber turn signals instead of red. It is a safer option. You can wire this module up so you can put a switchback bulb in your reverse light section of your tail light. VLEDS did this with the Tacoma, and it’s called VTails. I did this in my Dodge sedan that had a stop and turn setup. Very easy and recommended mod.

    • @zaccook
      @zaccook  4 หลายเดือนก่อน +2

      Thats smart! a little safer and it helps you stand out

  • @JonyTelev
    @JonyTelev 5 วันที่ผ่านมา

    And what happens on hazard lights

  • @xXIBON3ZIXx
    @xXIBON3ZIXx 4 หลายเดือนก่อน

    I tried this method but when i press the break it sends a .5s flash to the turn signal wire then turns it off and powers the break light. Might try your module mine was different

    • @zaccook
      @zaccook  4 หลายเดือนก่อน

      oh that sucks! To be honest im not 100 percent sure if this one had a delay or not as I couldn't see it when setting the brake lol

  • @hclan5876
    @hclan5876 3 หลายเดือนก่อน

    Grab a new relay I did that stopped the hyper flash

  • @RazoE
    @RazoE 4 หลายเดือนก่อน

    Definitely wanna try this on my Escape. From the factory there's a small provision for signals, but it's blanked off 🤔

    • @nascardrawings7700
      @nascardrawings7700 4 หลายเดือนก่อน

      What year escape?

    • @RazoE
      @RazoE 4 หลายเดือนก่อน +1

      @@nascardrawings7700 2012. 1st Gens have amber signals, but they use a relay system while the 2nd Gen uses BCMs

    • @zaccook
      @zaccook  4 หลายเดือนก่อน +1

      hmmmm maybe you drill it out and put in a bulb haha

    • @nascardrawings7700
      @nascardrawings7700 4 หลายเดือนก่อน

      @@RazoE depending on what your reverse bulb is you can put a switchback bulb in your reverse light

    • @RazoE
      @RazoE 4 หลายเดือนก่อน

      @@zaccook that's the plan!

  • @FittedLabs
    @FittedLabs 4 หลายเดือนก่อน

    🎉🎉