Front wheel removal | Velomobile World
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- 📹 Ausbau des Vorderrades | Velomobile World
➡️ Klicken Sie auf die Schaltfläche "CC", wenn die Übersetzung nicht automatisch angezeigt wird.
➡️ Click on the "CC" button if the subtitle does not appear automatically.
➡️ If you have questions do not hesitate to ask us.
-----------------------------------------------------------------------------------
⬇️ Do you need Technical Support? Visit our page below, with exploded views, videos and other info
➡️ www.velomobile...
💻 Website ➡️ www.velomobile...
✉️ Subscribe to our newsletter ⬇️
www.velomobile...
🙂 Thank you for following us!
-----------------------------------------------------------------------------------
▶️ For more velomobile videos check also these channels:
➡️ Sven Kroll "Velomobile Nord" ( / cptkidkaracho )
➡️ John Williams "velo-ads" ( / @velo-ads4206 )
➡️ Saukki ( / saukki86 )
➡️ Gary Solomon ( / garysolo1 )
➡️ Rhein228 ( / rhein228 )
A video about the correct/best way of adjusting the front wheel alignment would be nice😊
Thanks for this and the other very informative videos! 👍
Noted!
Good video. Wonder if the Snoek is the same as the Milan used to illustrate the process. Having the right tiny 8mm tool helps. One should be included with the velomobile.
.
Interesting Jan, but the Quest and QV are a little more difficult. I note that in your video the central track rod end is different and mounted below the steering plate using a female swivel eye instead of the traditional male connector. Because of the limited space to undo the nut I first remove the central hub bolt (under the rubber cap) then lift the hub upwards to touch the inside of the wheel box) This creates more space to access the nuts and also the brake and speedo cables) Once the 3 nuts are removed then just drop the wheel hub back in position before removing the strut as in your video.
It is a bit different indeed, but unfortunly I cannot make all video's about different types
Can you do a video on how the brake cabling is installed. I noticed that my brake cables are setup different than what I can see in this video. Thank you!
Which model do you have?
@@VelomobileWorld I have a Quest. It is one I built myself from the BlueVelo moulds so when I built it I had no instructions or other velomobiles to refer to. I’d like to make sure the cables are run in the most efficient way. Thank you.
You could say what key size did you used?
Hi, on velomobileworld.com we have a exploded view of the assembly
There you can see which bolt sizes we have in this assembly
Is this specifically manufactured tool provided with the velomobil? Is in the manual an "explosion drawing" so it is cristall clear in which sequence the washers have to installed?
Hi Thomas, on the website are many exploded views below community/ technical details. Have a look there please