Precision MACHINE Stripping - How To Prep For DIY Sanding Easy Tricks To Remove Car Lacquer & Paint
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Using 36 grit on my spinning sanders to strip a tight spot like this windshield post
Precision MACHINE Stripping - How To Prep For DIY Sanding Easy Tricks To Remove Car Lacquer & Paint
Billy's Amazon Link: amzn.to/3S1Cfs9
Using this link may lead to a commission at no additional cost to you HELPING THIS CHANNEL OUT
ALSO FIND ME ON
→Facebook: www.facebook.c....
→TikTok: / userbondo_billy
→ TH-cam / @oldbondobilly
→Instagram: / bondo__billy
→Contact: (Business Only) oldscool6260@gmail.com
#painting #sanding #diy #diycar #howto
Lacquer can often be heated up a bit and removed with razor blades. Well , that’s how we did it 40 years ago. Don’t worry the current paint strippers aren’t powerful enough to do much.
Chemical stripper never worked on factory lacquer
I can't agree with you more about the paint stripper, I learned a long time ago it will come back and bite you in the butt later. No matter how much you think you rinsed and neutralized it it will creep back up out of a crack and raise the paint somewhere down the road!👍
I really do hate that crap😉😉
Keep up the great videos Billy
Grat video BB. Thanks for sharing - have a great week my friend 👍😊
Thanks Jerry! Hope everything going good up there 😉😉
I'm first professor Bondo Billy!!!!!
Well I have been see buddys that do this I whatch😢 helped and set at paint store's got more out of this than they said 😊thanks
Thats a pretty pretty car!!! Fit for an classic old school kinda guy😊
With a sporty swagger😉😁
BOOM BABY! Great video Brotha!
Thanks Spidey😄👋
Some pretty good tips there 👍 👍 👍 👍
Thank you
👍❤️🤙
😎
I rattle can my truck.
And it has orange peel. Would it still be OK to clear coat the paint
Get some gray Scotch-Brite and scuff it up
@OldBondoBilly ok, just so I Understand?
Scuff up the paint color and then clear coat it. Just want to make sure I understand it. Right. Because all the videos I see only talk about scuffing clear coats and waxing to shine. Sorry, my deepest apologies. This is my first time rattle can a Vehicle.
You just need the light scratches of gray scotchbrite for the clear to stick. Using too rough a scuffing method might mess up your color
Yes sir strippers are junk and very expensive. Thank for the tips. 👍
Brother Billy,
How does a novice distinguish between lacquer and enamel? Clearcoat? And, with clearcoat, that's enamel?
Lacquer gums up your sandpaper, a lot easier, and faster than enamel or basecoat clearcoat
Great control of the Billy sander, bud.
how do you decide Billy sander vs. D.A. sander?
If the objective is paint REMOVAL, Billy sander is my first choice😉😉