Now this is a cool build! The 3800’s are seriously slept on and to see a twin turbo build is really dope, I had an 05 FBO Grand Prix GTP and it was so damn fun to drive so I’m betting your Camaro is gonna be a blast.
Look into the AR5 or R154 trans w/ a 96-00 Dakota bellhousing for when the T5 breaks. It should bolt to the 3800. Might need to work some input shaft magic.
I'm surprised Dan didn't tell you to get at least a few wot pulls in a few gears like 2nd 3rd and 4th so that he could see the timing and KR activity, and MAF readings.
Pimpin. Love the work buddy. Been a minute since I turned some wrenches but this project has given me some Ideas. I found me one on the cheap. Now piecing together the parts.
Could be the rear unit itself, they’re known for having issues, see what you can find first, something could be too loose or too tight, but worst case new rear units are easy to get and easy to install
"Got a service engine , brake light and ABS light on " Me : Nothing 3 pieces of electrical tape can't fix 👍 I've had my 96' Polo green RS for almost 23 years now , still perfect condition. I'm fighting over LS swap or a serious built v6 only to be something more unique. Years ago I looked into the STS rear mount systems. But now where technology is almost any 4 , 6 or 8 can be built insane. My plates will say " NO CAP " Love your project!
Just a small heads up if ya haven’t tried it yet. Buy get som magnet sheet and cut out the size to fit the vent in the hood, that’s if it or the hood is metal😁
Awesome. So, is this car figured out and finalized? Would be nice to just have a dedicated kit to turbo these cars or cars with these motors in the. Cheap and plentiful little motors
I did finish it but Spun the bearing before finished tuning in the slow process of sending engine to the shop but they sell a turbo kit on eBay for the Camaro with this engine
You should look into the t56 swap for this . I dont see the t5 being reliable for very long with any real power going on. If you google warshrike t56 swap it should pop up . He had to get an adapter plate but didnt have to swap clutch or anything else .
Lookin to a electric supercharger. Speed master p2 with a castle 2028 motor hobbywing esc controller it will give you 150hp on wide open throttle runs off 2 small battery packs maybe 3/4 of a pound. Alex is the guy that spent 10grand developing it. He dynoed his at 650hp no turbos just the electric supercharger. It will help you with the turbo lag. Price is 1500 for everything
brooo i have a z28 n a v6 both the same miles lol. My z28 needs lifters n my v6 i bought with a dead headgasket n auto... Im kinda thinking to build both of them instead of getting a trans am and building one with a lq lol. Do you like your twin set up or would you rather have gone supercharged or single turbo lol. Im hoping ill be able to manual swap mine but im young n got so much experiece to be desired haha!
Proud for you. Lot of work that many would say is a waste BC its not an LSX. Power and TQ isnt the only thing that matters. If you cant enjoy it then its useless. Glad for you bud.
Not the SES light that’s for the PCM ...but Is your service vehicle light on as well from what I’ve researched it will come on when your ABS is disabled because it’s connected to the BCM body control modular ??
@@DeeStruggles not on my car, I have manual brakes with no ABS at the moment all I get is abs inop from the wheel speed sensors and brake light. 98 cars are weird though so if yours is a 99+ it may be different. 98s had different fuel tanks, different various sensors, cluster, and I don't remember if the V6 cars are the same as the ls1 cars.. but the 98 LS cars like mine got a totally different PCM and PCM harness than the 99-02 cars.
Shouldn’t the data logging process included full throttle operation to determine the state of tune at engine speeds where an improper tune would do the most damage ? Twin turbos without balls….
i love the fact that someone drove it without the t tops in, real ones know thats the best look to ride
Now this is a cool build! The 3800’s are seriously slept on and to see a twin turbo build is really dope, I had an 05 FBO Grand Prix GTP and it was so damn fun to drive so I’m betting your Camaro is gonna be a blast.
I’m planning a l67sc Chevy s10 with either a th400 or 4l80e fed into a awd transfer case from a 2017 suburban/trailblazer
This is so sick. So happy
Sameeeee
Such a cool build to do, forced induction v6 muscle cars are underrated. Seems to sound pretty good too
No they aren't.
@@matt6951 okay buddy
Look into the AR5 or R154 trans w/ a 96-00 Dakota bellhousing for when the T5 breaks. It should bolt to the 3800. Might need to work some input shaft magic.
Looking at doing a 4.3 twin turbo for 2nd gen camaro and 5 speed with .86 overdrive.
I'm surprised Dan didn't tell you to get at least a few wot pulls in a few gears like 2nd 3rd and 4th so that he could see the timing and KR activity, and MAF readings.
I know that look. Thats the same look I get everything I get in my 99. 🤩💯🤘🏼
Pimpin. Love the work buddy. Been a minute since I turned some wrenches but this project has given me some Ideas. I found me one on the cheap. Now piecing together the parts.
Could be the rear unit itself, they’re known for having issues, see what you can find first, something could be too loose or too tight, but worst case new rear units are easy to get and easy to install
"Got a service engine , brake light and ABS light on "
Me : Nothing 3 pieces of electrical tape can't fix 👍 I've had my 96' Polo green RS for almost 23 years now , still perfect condition. I'm fighting over LS swap or a serious built v6 only to be something more unique. Years ago I looked into the STS rear mount systems. But now where technology is almost any 4 , 6 or 8 can be built insane. My plates will say " NO CAP "
Love your project!
it certainly drones like a 3800! congrats on getting it running
Great job. It sounds nice. I love the sound of turbos. Keep them coming!
This is an epic moment bro, so happy for you.
Disappointed... I came for some PULLS!!!
First tune and you want pulls ?
You baby the car during this process .
im so happy for you bro! i have a 2018 supercharged v6 and i love watching your channel
Bro you need a poly trans mount, I can tell you are using the stock one, you'll rip it in half the first time you get on it
Nice to see it on the road man. Looks good. Let's see some wot pulls soon!
How hard is it to build a 3800 I have a 3.8l I want to rebuild probably since it's more expensive to engine swap it
Looking good man! Shouldn’t be long and you will be full throttle. Only bad thing about tuning, it takes a while but once it’s done it’s done.
and i seen your channel with the 68 came accross it when i was looking them up very cool!!
That’s bad ass dude I dig it
Hell yeah man congratulations car looks crisp ya heard been watching a while happy to see your channel growth as well.
Just a small heads up if ya haven’t tried it yet. Buy get som magnet sheet and cut out the size to fit the vent in the hood, that’s if it or the hood is metal😁
Factory flat hood is steel
@@bhcamaro2002 yes sir😁
Awesome. So, is this car figured out and finalized? Would be nice to just have a dedicated kit to turbo these cars or cars with these motors in the. Cheap and plentiful little motors
I did finish it but Spun the bearing before finished tuning in the slow process of sending engine to the shop but they sell a turbo kit on eBay for the Camaro with this engine
You should look into the t56 swap for this . I dont see the t5 being reliable for very long with any real power going on. If you google warshrike t56 swap it should pop up . He had to get an adapter plate but didnt have to swap clutch or anything else .
I had twin turbos on my 98 ws6 v8 much fun ! There off now wished I had put a supercharger instead don't run as hot
Just got my son a 96 red v6 with 80k
all his to build . He’s got time .
Mind sharing the base tune file ? I have mgb I'm single turboing a 3800 in and I wouldn't mind a base to start with. Thanks.
I would love a cavelier or berreta with the pontiact Aztec AWD 3400 twin turboed .
whos the tuner if you dont mind saying i probly know him... know lot people in the 3800 world
Yo my 3800 check engine light flashes at high rpm maybe you can help me?
could be few things
plugs wires icm coiloacks
@@gabrielmascia5460 knock sensor maybe. is it the series 2 SC engine?
Tyler Bailey nope its just the normal 3800 II
Tyler Bailey i dont get a knock sensor code though
Nice project mate!
Are you running a balance shaft?? The gears for mine are going out and was wanting a cheap fix
ya running a balance shaft
Did you keep the t5 or did you switch to a t56 transmission
Where did you get that steering wheel??
Lookin to a electric supercharger. Speed master p2 with a castle 2028 motor hobbywing esc controller it will give you 150hp on wide open throttle runs off 2 small battery packs maybe 3/4 of a pound. Alex is the guy that spent 10grand developing it. He dynoed his at 650hp no turbos just the electric supercharger. It will help you with the turbo lag. Price is 1500 for everything
I am thinking about Building a SC-10 with the SC3800 and a Chevy S-10 stepside,,, and maybe "Clean your Windshield"
Nice man!
How did you tune?
Just curious, why you didn't route the turbos into the factory style exhaust. Just curious. Nice ride.
thanks....it seem i like to make things difficult for myself
I wanna turbo mine and from the looks it wants a turbo lol both exhaust outlets are right there on the side of the engine same way as intake
Where did you get that wing I want one bad
Beauty
Hey whats with the gages acting all kinds of wierd? I really need help with mine because they don't work after the initial crazy jumping around
Peter Kroeker my gauges work fine just my light display turns back to blue after turning the car off
Bought a 02 camaro and am getting it ready to daily
Love the car
brooo i have a z28 n a v6 both the same miles lol. My z28 needs lifters n my v6 i bought with a dead headgasket n auto... Im kinda thinking to build both of them instead of getting a trans am and building one with a lq lol. Do you like your twin set up or would you rather have gone supercharged or single turbo lol. Im hoping ill be able to manual swap mine but im young n got so much experiece to be desired haha!
My other question is what steering wheel mount do you have and is it a quick release lol. My old neighbor gave me a momo and I realyl wanna put it on
Proud for you. Lot of work that many would say is a waste BC its not an LSX. Power and TQ isnt the only thing that matters. If you cant enjoy it then its useless. Glad for you bud.
Well, the 3800 is basically a v6 LS, so it has the power and torque just fine, just 2 less cylinders n such
Very cool.
Where did u get that spoiler and Quick release from?
quick release?? the spoiler i made im about to start selling them maybe in another month or so
@@DeeStruggles thanks and I meant that steering wheel lol
Romp on it, what’s she got❓
Where did you got your triple 3 gauge
glow shift or ebay
Heads up the ABS lights can't be shut off with HPtuners.
thanks for the info
@@DeeStruggles no problem, the reason why is because it isn't controlled by the PCM. My Terminator X powered 98 has the abs light on still lol
Not the SES light that’s for the PCM ...but Is your service vehicle light on as well from what I’ve researched it will come on when your ABS is disabled because it’s connected to the BCM body control modular ??
@@DeeStruggles not on my car, I have manual brakes with no ABS at the moment all I get is abs inop from the wheel speed sensors and brake light. 98 cars are weird though so if yours is a 99+ it may be different. 98s had different fuel tanks, different various sensors, cluster, and I don't remember if the V6 cars are the same as the ls1 cars.. but the 98 LS cars like mine got a totally different PCM and PCM harness than the 99-02 cars.
Any stock tunes for a park avenue? Lol
I do have a stock tune for a Buick regal l67 sc
What part of NC?
the best part lol
@@DeeStruggles southeast here
James Dew I’m near Charlotte
Damn I'm in hopemills
Hit me up Dan.
Shouldn’t the data logging process included full throttle operation to determine the state of tune at engine speeds where an improper tune would do the most damage ?
Twin turbos without balls….
Same car
daninel Smutty or? lol
Did you dump Miley cuz she was so ho-ish? Seriously, the 3.8 ‘Bird is awesome. Especially with the 5M.
Flash
Love the build, but I'm not digging the urban slang. 😊
Soild job man sounds good
1a